Data migration route
Docrio to Lawmatics migration
Docrio is a cloud document management system, and Lawmatics is a cloud CRM and intake system. Lawmatics is built around people and enquiries, so the contact list leads this move, and the table shows what else has a place.
DocrioCloud- Documents: Carried with mapping
- Templates: Carried with mapping
- Emails: Confirmed in the analysis
- Tasks: Confirmed in the analysis
- Custom fields: Confirmed in the analysis
LawmaticsCloud- 2 mapped
- 3 to confirm
What moves
What moves from Docrio to Lawmatics
Each row is a kind of record Docrio holds, whether Lawmatics has a place for it, and what is planned. On this route two kinds need mapping and three kinds are confirmed in the analysis.
| Record | What is planned | ||
|---|---|---|---|
| DocumentsFiles stored in or linked from the system | HeldFiled against Litify matters, with tags and editable file information. | Has a place in partFiles and folders on each matter, added by upload or API, not by the spreadsheet import. | Carried with mapping |
| EmailsEmails saved to matters or to the store | To be confirmed | Has a place in partEmails reach a matter through mail sync from a connected mailbox. | Confirmed in the analysis |
| TasksTo-dos and workflow steps assigned to people | To be confirmedTasks can be raised against a document; they are Litify records. | Has a place | Confirmed in the analysis |
| Custom fieldsFields and record types the firm added itself | To be confirmed | Has a placeMatter, contact and company fields. A field must exist before data is imported into it. | Confirmed in the analysis |
| TemplatesPrecedents, document templates and automation | HeldDocument generation templates with merge fields and conditional logic. | Has a place in partDocument and email templates are rebuilt with Lawmatics merge fields. | Carried with mapping |
What the plans mean
- Carried with mapping
- Lawmatics holds this differently, or in part. Each field or value is matched to its place before loading, and you see the mapping first.
- Confirmed in the analysis
- We could not confirm this from the two products’ own material, so it is checked against your data before the plan is fixed.
The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.
This kind of move
Mostly a contact list, cleaned before it lands.
Lawmatics is built for contacts, leads and the conversations around them. What Docrio can offer it first is a list of people and companies, and sometimes a history that can be attached as notes. Whether anything else it holds has a place depends on what Lawmatics keeps besides contacts, and the table above shows that kind by kind. What has no place stays where it is or is archived.
A contact list taken from a system that was never a CRM needs work before it is useful. Names are split or joined differently, the same client appears under several spellings, and there is no record of who agreed to be contacted. The list is cleaned and de-duplicated, matched against what Lawmatics already holds, and loaded with a source tag, so the firm can tell these contacts from the ones that came through intake.
Both are hosted by their makers, so nothing is collected from the firm’s office. What can be taken out of Docrio depends on its export tools and on what its maker provides on request, and that is confirmed during the analysis, before a date is set. The subscription to Docrio is kept running until the checks on Lawmatics are finished.
Where the data is now
Leaving Docrio
Docrio cannot be separated from the Litify system it sits in. Each file is tied to a Litify record, and that record supplies the matter number, client and case type. Leaving it means extracting the files together with the identifiers of the records they hang from. Usually it happens as part of moving the whole Litify system, not the documents alone.
Files hang off Litify records
A document’s context is the record it was saved to, normally a matter. That relationship is how a file finds its matter in the destination. Keeping the record identifier with every file is what allows it to be joined to the matter export and filed under the right matter.
Folders and tags by case type
Litify firms normally set a standard folder structure for each case type and add tags on top. The structure for a motor vehicle claim differs from the one for a mass tort. Each case type’s folder set is mapped separately, and tags become document categories or are written into the name.
Templates do not travel
Generation templates read fields from Litify by name. In another system those fields are called something else, or do not exist. The documents already generated move as ordinary files. The templates themselves are rebuilt in the destination’s own automation, starting with the ones the firm uses most.
Confirm where files are stored
How Docrio stores file content, and the route for exporting it in bulk, is confirmed with the firm’s Litify administrator at the start. Access is given in whatever way the firm decides. Volumes in injury practices are large, with medical records and video, so transfer time is part of the plan.
Where it is going
Arriving in Lawmatics
Lawmatics takes matters, contacts and companies from CSV files, and its API accepts notes, tasks, appointments, files, time entries and invoices. It is an intake and client relationship system, so a firm arriving from full practice management has to decide what it is for. People and matters load well. There is no general ledger, and years of billing history have no natural home.
Contacts and matters load separately
The import expects two spreadsheets: one for contacts or companies with no case, such as referrers and other lawyers, and one for matters. A matter import creates the matter and its primary contact together. Every matter has exactly one primary contact, so joint clients are loaded as one primary and one relationship.
Set up before loading
Owner, stage, practice area, source and campaign are matched by name. A value on the spreadsheet that does not match one in Lawmatics exactly creates a new one, which is how a firm ends up with two spellings of the same practice area. Users, pipelines, practice areas and marketing sources are set up first, and custom fields must exist before data is loaded into them.
Statuses and matter numbers
Each imported matter must be PNC (potential new client), Hired or Lost, with open and closed handled as sub-statuses the firm creates. The case number is a system field assigned by an auto-numbering pattern and cannot be edited by hand afterwards. Whether old matter numbers can be loaded into it, or belong in a custom field, is tested in the trial load.
Duplicates are matched by email
With Match Contacts by Email switched on, a contact whose email already exists is skipped or updated, never doubled. Names and phone numbers are not checked. Matters are not deduplicated at all, so two rows with one email create two matters on one contact. Clean-up therefore happens in the spreadsheet, and automations are switched off for every load.
What has no place
There is no general ledger. The Time & Billing module holds time entries, expenses, invoices and a trust account with a running balance per matter, and past invoices are entered as already sent and then marked paid. A firm that needs its full accounting history keeps the old system read only or carries the books in an accounting package.
How NewLaw runs it
Four steps, in this order.
Nothing financial lands in Lawmatics on this route, which makes it repeatable: a load can be run again until it is right.
Analysis
We read what Docrio holds and how it is organised, then agree with you where each kind of record will sit in Lawmatics. Anything with no place there stays behind or is archived, and you see which before the move.
Clean-up
Duplicate clients, matters and folders are merged where they can be identified, and naming is put into one format, before anything is copied. It is not always possible to find every one, so some may carry across.
Trial load
A trial is loaded into Lawmatics and checked against Docrio: record and file counts, the links between records, document dates, and a sample opened by your own people. Exceptions are listed for you to decide.
Cutover
There is no financial cutover on this route. After a short freeze on changes in Docrio, a final pass over a weekend picks up what changed since the trial. Docrio is kept read only as the fall-back record.
Fixed price, agreed after the analysis. How NewLaw moves legal data
Start
Start this migration
Tell us what is in Docrio and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.
Step 1 of 5
What happens after you send it
- A free first call
We go through your answers with you and ask about anything they leave open.
- An analysis of what Docrio holds
What is in it, how its records link, and where each piece would sit in Lawmatics. Anything with no place there comes across as a note or stays behind, and you see which before the move.
- A fixed price in writing
Set after the analysis, so it reflects what is in your data. You have it before any work starts.
Beyond the data
Setting up Lawmatics
Loaded data is not yet a working system. This is what NewLaw sets up in Lawmatics, beyond the migration, so that people can work in it from the first day.
In Lawmatics the design comes before the data. The pipeline stages, practice areas, custom fields and relationship types decide what the import can hold, and the forms and automations decide what the firm’s intake looks like from the first day. If a practice system sits behind it, the field mapping between the two is part of the same job.
Set-up decisions in Lawmatics
- Pipelines and stages for intake and for open matters
- Practice areas, sub-statuses, relationship types and the matter numbering pattern
- Custom fields on matters, contacts and companies
- Intake forms, booking links and e-signature document templates
- Follow-up automations, with marketing sources and campaigns
- Mail and calendar sync, user roles and practice system integration
Questions
Docrio to Lawmatics: what firms ask
We are leaving Litify. Are our documents part of that move?
They should be scoped explicitly. A matter export on its own should not be assumed to contain the documents, and the files may come out by a different route from the Litify data. The plan covers both and joins them on the matter, and document counts are checked per matter after the trial load.
Can we keep Litify and move only the documents to iManage or NetDocuments?
Litify publishes integrations with both, so that arrangement exists. The existing files are then moved from Docrio into workspaces that match the Litify matters, and new documents are saved through the integration. The matter number is the join, so it has to be identical on both sides before the load.
Do documents from Docrio keep their folders and dates in Lawmatics?
In part. Files and folders on each matter, added by upload or API, not by the spreadsheet import. The structure in Docrio is mapped to what Lawmatics offers and you see the mapping before the load. File dates are carried.
Does everything in Docrio have a place in Lawmatics?
Most of it does on paper. Emails, tasks and custom fields could not be confirmed from the two products’ own material, so those are checked in the analysis. Anything that turns out to have no place in Lawmatics is kept as a readable archive, and you see which before the move.
What has to be decided before Docrio data is loaded into Lawmatics?
Documents and templates are carried with mapping, so each mapping is agreed with you first. Emails, tasks and custom fields are confirmed in the analysis. The firm also decides which closed matters and how many versions of a document are in scope.
Other routes
Other routes from Docrio and into Lawmatics
Where to start
Before and after the move.
Choosing the system comes before a migration. Setting it up and putting AI to work come after.
Choose your systems
Technology stack selection
Decide which practice management system your firm runs, with the evidence and the cost beside it.
About four weeks for a firm of about 15 people. Fixed price, set after a free first call.
Move your data
Data migration
Your data is cleaned up before anything moves, then a trial load is checked against the old system.
Fixed price, agreed after the analysis.
Set up your new system
Implementation
Your new system set up around the way your firm works: configuration, document automation and training.
A small firm of 1 to 10 users typically takes 4 to 8 weeks. A mid-sized firm of 10 to 50 users takes 8 to 16 weeks.
Put AI to work
AI advisory and enablement
A small group of your people learn to use an approved AI tool on real work, under written rules.
Two to four weeks for a small first group. Fixed price, set after a free first call.
Docrio and Lawmatics are the names and marks of their owners, used here only to identify the two systems.
Moving from Docrio to Lawmatics?
Tell us what you are moving. You get a plan and a fixed price after the analysis.
We reply within one business day.