Skip to content
NEWLAW.COM
+61 1300 495 281
Let’s talk

Data migration route

Docrio to Gladiate migration

Docrio is a cloud document management system, and Gladiate is a cloud case management system for personal injury work. The move is matching each file in Docrio to its case in Gladiate.

FromDocrioCloud
  1. Documents: Carried across
  2. Templates: Carried with mapping
  3. Emails: Confirmed in the analysis
  4. Tasks: Confirmed in the analysis
  5. Custom fields: Confirmed in the analysis
ToGladiateCloud
  • 1 carried
  • 1 mapped
  • 3 to confirm
What the two products hold. The analysis confirms it field by field.

What moves

What moves from Docrio to Gladiate

Each row is a kind of record Docrio holds, whether Gladiate has a place for it, and what is planned. On this route one kind of record carries across, one kind needs mapping and three kinds are confirmed in the analysis.

Records in Docrio and their place in Gladiate
RecordIn DocrioIn GladiateWhat is planned
DocumentsFiles stored in or linked from the systemHeldFiled against Litify matters, with tags and editable file information.Has a placeFiled to the firm’s folder structure.Carried across
EmailsEmails saved to matters or to the storeTo be confirmedTo be confirmedConfirmed in the analysis
TasksTo-dos and workflow steps assigned to peopleTo be confirmedTasks can be raised against a document; they are Litify records.Has a placeTasks and task plans.Confirmed in the analysis
Custom fieldsFields and record types the firm added itselfTo be confirmedTo be confirmedConfirmed in the analysis
TemplatesPrecedents, document templates and automationHeldDocument generation templates with merge fields and conditional logic.Has a place in partFirm templates are set up again in Gladiate. Old templates are not converted.Carried with mapping

What the plans mean

Carried across
Gladiate has a place for this kind of record. It is loaded there and checked against Docrio.
Carried with mapping
Gladiate holds this differently, or in part. Each field or value is matched to its place before loading, and you see the mapping first.
Confirmed in the analysis
We could not confirm this from the two products’ own material, so it is checked against your data before the plan is fixed.

The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.

This kind of move

Every document goes to the case it belongs to.

A case management system expects each document to sit on a case, usually in a category such as correspondence, medical records or court documents. Docrio organises files its own way, by profile or by folder. So the move needs two rules: which case a file belongs to, and which category it goes in. The first comes from client and matter references or folder names. The second comes from a document type or a subfolder, and where neither exists the files arrive uncategorised and are marked as such.

Cases must exist in Gladiate before documents can be attached to them. If the system is already live, files are matched to its case list and the unmatched ones are reported. If it is new, the case list is created first. Dates, authors and file names are kept. Email comes across as message files. Where several versions of a document exist, the firm chooses between loading the latest and loading them all.

Both are hosted by their makers, so nothing is collected from the firm’s office. What can be taken out of Docrio depends on its export tools and on what its maker provides on request, and that is confirmed during the analysis, before a date is set. The subscription to Docrio is kept running until the checks on Gladiate are finished.

Where the data is now

Docrio cannot be separated from the Litify system it sits in. Each file is tied to a Litify record, and that record supplies the matter number, client and case type. Leaving it means extracting the files together with the identifiers of the records they hang from. Usually it happens as part of moving the whole Litify system, not the documents alone.

  1. Files hang off Litify records

    A document’s context is the record it was saved to, normally a matter. That relationship is how a file finds its matter in the destination. Keeping the record identifier with every file is what allows it to be joined to the matter export and filed under the right matter.

  2. Folders and tags by case type

    Litify firms normally set a standard folder structure for each case type and add tags on top. The structure for a motor vehicle claim differs from the one for a mass tort. Each case type’s folder set is mapped separately, and tags become document categories or are written into the name.

  3. Templates do not travel

    Generation templates read fields from Litify by name. In another system those fields are called something else, or do not exist. The documents already generated move as ordinary files. The templates themselves are rebuilt in the destination’s own automation, starting with the ones the firm uses most.

  4. Confirm where files are stored

    How Docrio stores file content, and the route for exporting it in bulk, is confirmed with the firm’s Litify administrator at the start. Access is given in whatever way the firm decides. Volumes in injury practices are large, with medical records and video, so transfer time is part of the plan.

More about moving off Docrio

Where it is going

Gladiate is a destination for personal injury firms, and what it expects is injury data: a client, an incident, coverage, providers and a case status. Loading a firm into it means shaping the old system’s records into that pattern and preparing the templates, task plans and folder structure that the vendor’s onboarding asks each firm to supply.

  1. Injury fields come first

    Coverage, liability and medical details are what the product is designed to put in front of staff. In the old system they may be in custom fields, notes or a spreadsheet. They are pulled into columns during the analysis, so a loaded case shows its insurer and policy details and not an empty panel.

  2. Templates and task plans

    The vendor’s onboarding has each firm set up its own document templates, task plans, litigation deadlines and questionnaires. These are prepared from what the firm uses now. Merge fields in old templates are replaced with Gladiate’s, and task plans are written down stage by stage before anyone builds them.

  3. A folder structure per case

    Documents are filed in a folder structure the firm defines. The old system’s folders or categories are mapped to it once, and every case is loaded to the same pattern. Files with no clear category go to a holding folder on the case and are listed, not scattered.

  4. What it may not hold

    Time records, invoices and trust ledgers are not described on the vendor’s public pages. A firm that needs those carried over has it confirmed in the analysis. If there is no place for them, balances stay in the accounting package and the detailed history is kept in the old system, read only.

More about moving into Gladiate

How NewLaw runs it

Four steps, in this order.

Nothing financial lands in Gladiate on this route, which makes it repeatable: a load can be run again until it is right.

  1. Analysis

    We read what Docrio holds and how it is organised, then agree with you where each kind of record will sit in Gladiate. Anything with no place there stays behind or is archived, and you see which before the move.

  2. Clean-up

    Duplicate clients, matters and folders are merged where they can be identified, and naming is put into one format, before anything is copied. It is not always possible to find every one, so some may carry across.

  3. Trial load

    A trial is loaded into Gladiate and checked against Docrio: record and file counts, the links between records, document dates, and a sample opened by your own people. Exceptions are listed for you to decide.

  4. Cutover

    There is no financial cutover on this route. After a short freeze on changes in Docrio, a final pass over a weekend picks up what changed since the trial. Docrio is kept read only as the fall-back record.

Fixed price, agreed after the analysis. How NewLaw moves legal data

Start

Start this migration

Tell us what is in Docrio and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.

Step 1 of 5

Step 1 of 5: Start with the route

Moving fromDocrio
Moving toGladiate

The route comes from this page. Four short steps follow. Nothing you send commits your firm to anything.

What happens after you send it

  1. A free first call

    We go through your answers with you and ask about anything they leave open.

  2. An analysis of what Docrio holds

    What is in it, how its records link, and where each piece would sit in Gladiate. Anything with no place there comes across as a note or stays behind, and you see which before the move.

  3. A fixed price in writing

    Set after the analysis, so it reflects what is in your data. You have it before any work starts.

Beyond the data

Setting up Gladiate

Loaded data is not yet a working system. This is what NewLaw sets up in Gladiate, beyond the migration, so that people can work in it from the first day.

Gladiate is delivered ready for injury work, so set-up is about making it the firm’s own. The vendor’s onboarding covers templates, task plans, folder structure, litigation deadlines and client questionnaires. Each of those is a decision the firm has to make, and it goes faster when current practice has been written down beforehand.

Set-up decisions in Gladiate

  • Set up and test the firm’s document templates
  • Write task plans for each stage of a case
  • Agree one folder structure for case documents
  • Enter litigation deadlines for the firm’s jurisdictions
  • Prepare client questionnaires, surveys and scheduled case updates
  • Connect Outlook or Google calendars for two-way sync

Questions

Docrio to Gladiate: what firms ask

We are leaving Litify. Are our documents part of that move?

They should be scoped explicitly. A matter export on its own should not be assumed to contain the documents, and the files may come out by a different route from the Litify data. The plan covers both and joins them on the matter, and document counts are checked per matter after the trial load.

Can we keep Litify and move only the documents to iManage or NetDocuments?

Litify publishes integrations with both, so that arrangement exists. The existing files are then moved from Docrio into workspaces that match the Litify matters, and new documents are saved through the integration. The matter number is the join, so it has to be identical on both sides before the load.

Do documents from Docrio keep their folders and dates in Gladiate?

Gladiate stores documents. Filed to the firm’s folder structure. Each file is placed under the client and matter it came from, and created and modified dates are carried, so a document still shows when it was written. The trial load is checked by count and by opening a sample.

Does everything in Docrio have a place in Gladiate?

Most of it does on paper. Emails, tasks and custom fields could not be confirmed from the two products’ own material, so those are checked in the analysis. Anything that turns out to have no place in Gladiate is kept as a readable archive, and you see which before the move.

What has to be decided before Docrio data is loaded into Gladiate?

Templates are carried with mapping, so each mapping is agreed with you first. Emails, tasks and custom fields are confirmed in the analysis. The firm also decides which closed matters and how many versions of a document are in scope.

Where to start

Before and after the move.

Choosing the system comes before a migration. Setting it up and putting AI to work come after.

How we do itDiscovery to rollout, step by step

Docrio and Gladiate are the names and marks of their owners, used here only to identify the two systems.

Moving from Docrio to Gladiate?

Tell us what you are moving. You get a plan and a fixed price after the analysis.

We reply within one business day.