Skip to content
NEWLAW.COM
+61 1300 495 281
Let’s talk

Data migration route

Document Locator to Lawmatics migration

Document Locator is a server-based document management system, and Lawmatics is a cloud CRM and intake system. Lawmatics is built around people and enquiries, so the contact list leads this move, and the table shows what else has a place.

FromDocument LocatorServer
  1. Tasks: Carried across
  2. Documents: Carried with mapping
  3. Emails: Carried with mapping
  4. Custom fields: Carried with mapping
  5. Notes: Confirmed in the analysis
  6. Templates: Confirmed in the analysis
ToLawmaticsCloud
  • 1 carried
  • 3 mapped
  • 2 to confirm
What the two products hold. The analysis confirms it field by field.

What moves

What moves from Document Locator to Lawmatics

Each row is a kind of record Document Locator holds, whether Lawmatics has a place for it, and what is planned. On this route one kind of record carries across, three kinds need mapping and two kinds are confirmed in the analysis.

Records in Document Locator and their place in Lawmatics
RecordIn Document LocatorIn LawmaticsWhat is planned
DocumentsFiles stored in or linked from the systemHeldIn repository folders, with automatic versions, profiles and an audit log.Has a place in partFiles and folders on each matter, added by upload or API, not by the spreadsheet import.Carried with mapping
EmailsEmails saved to matters or to the storeHeld in partEmails and attachments can be captured and managed with the documents.Has a place in partEmails reach a matter through mail sync from a connected mailbox.Carried with mapping
NotesFile notes, matter notes and contact notesTo be confirmedHas a placeNotes on matters, contacts and companies.Confirmed in the analysis
TasksTo-dos and workflow steps assigned to peopleHeld in partWorkflow and approval steps routed to people.Has a placeCarried across
Custom fieldsFields and record types the firm added itselfHeldMetadata is applied through profiles the administrator defines.Has a placeMatter, contact and company fields. A field must exist before data is imported into it.Carried with mapping
TemplatesPrecedents, document templates and automationTo be confirmedHas a place in partDocument and email templates are rebuilt with Lawmatics merge fields.Confirmed in the analysis

What the plans mean

Carried across
Lawmatics has a place for this kind of record. It is loaded there and checked against Document Locator.
Carried with mapping
Lawmatics holds this differently, or in part. Each field or value is matched to its place before loading, and you see the mapping first.
Confirmed in the analysis
We could not confirm this from the two products’ own material, so it is checked against your data before the plan is fixed.

The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.

This kind of move

Mostly a contact list, cleaned before it lands.

Lawmatics is built for contacts, leads and the conversations around them. What Document Locator can offer it first is a list of people and companies, and sometimes a history that can be attached as notes. Whether anything else it holds has a place depends on what Lawmatics keeps besides contacts, and the table above shows that kind by kind. What has no place stays where it is or is archived.

A contact list taken from a system that was never a CRM needs work before it is useful. Names are split or joined differently, the same client appears under several spellings, and there is no record of who agreed to be contacted. The list is cleaned and de-duplicated, matched against what Lawmatics already holds, and loaded with a source tag, so the firm can tell these contacts from the ones that came through intake.

Document Locator runs on the firm’s own equipment, so the data is collected there: a copy of the database and the folders its documents sit in, taken with the firm’s IT provider or over a remote session. Lawmatics is hosted by its maker, so loading depends on the import tools and access it provides. The old machine is kept, read only, as the fall-back record.

Where the data is now

Because Document Locator presents itself as folders in Windows, people assume the documents can be dragged out like files on a drive. They are in a SQL Server repository. A copy made that way should not be expected to bring versions, profile values or permissions with it. A planned extraction reads the repository for those, and for check-out state as well.

  1. A repository, not a share

    The folder tree users see is drawn from a Microsoft SQL Server repository. On-premises, that database is on the firm’s server and can be backed up and read. In the hosted service it is on Azure and access is arranged with ColumbiaSoft. Which of the two applies shapes how the work begins.

  2. Folders stand in for matters

    There is no client or matter record, so firms build the equivalent with a folder convention, sometimes created automatically by a project-folder rule. The convention is read off the tree and tested: how many top-level folders match a client in the practice management system, and how many are something else.

  3. Version numbers and notes

    Every check-in adds a version with an incrementing number, users can add a version note, and prior versions can be promoted. For controlled documents such as policies and precedents, that history is the point of the system. The firm decides folder by folder whether history comes across or only the current version.

  4. Workflow and required reading

    Approvals in progress, review reminders and acknowledgements that staff have read a policy are records of process. A legal document system will usually have nowhere to put them. Reports are run from Document Locator before cutover and saved as documents, so the evidence is kept even though the workflow is not.

More about moving off Document Locator

Where it is going

Lawmatics takes matters, contacts and companies from CSV files, and its API accepts notes, tasks, appointments, files, time entries and invoices. It is an intake and client relationship system, so a firm arriving from full practice management has to decide what it is for. People and matters load well. There is no general ledger, and years of billing history have no natural home.

  1. Contacts and matters load separately

    The import expects two spreadsheets: one for contacts or companies with no case, such as referrers and other lawyers, and one for matters. A matter import creates the matter and its primary contact together. Every matter has exactly one primary contact, so joint clients are loaded as one primary and one relationship.

  2. Set up before loading

    Owner, stage, practice area, source and campaign are matched by name. A value on the spreadsheet that does not match one in Lawmatics exactly creates a new one, which is how a firm ends up with two spellings of the same practice area. Users, pipelines, practice areas and marketing sources are set up first, and custom fields must exist before data is loaded into them.

  3. Statuses and matter numbers

    Each imported matter must be PNC (potential new client), Hired or Lost, with open and closed handled as sub-statuses the firm creates. The case number is a system field assigned by an auto-numbering pattern and cannot be edited by hand afterwards. Whether old matter numbers can be loaded into it, or belong in a custom field, is tested in the trial load.

  4. Duplicates are matched by email

    With Match Contacts by Email switched on, a contact whose email already exists is skipped or updated, never doubled. Names and phone numbers are not checked. Matters are not deduplicated at all, so two rows with one email create two matters on one contact. Clean-up therefore happens in the spreadsheet, and automations are switched off for every load.

  5. What has no place

    There is no general ledger. The Time & Billing module holds time entries, expenses, invoices and a trust account with a running balance per matter, and past invoices are entered as already sent and then marked paid. A firm that needs its full accounting history keeps the old system read only or carries the books in an accounting package.

More about moving into Lawmatics

How NewLaw runs it

Four steps, in this order.

Nothing financial lands in Lawmatics on this route, which makes it repeatable: a load can be run again until it is right.

  1. Analysis

    We read what Document Locator holds and how it is organised, then agree with you where each kind of record will sit in Lawmatics. Anything with no place there stays behind or is archived, and you see which before the move.

  2. Clean-up

    Duplicate clients, matters and folders are merged where they can be identified, and naming is put into one format, before anything is copied. It is not always possible to find every one, so some may carry across.

  3. Trial load

    A trial is loaded into Lawmatics and checked against Document Locator: record and file counts, the links between records, document dates, and a sample opened by your own people. Exceptions are listed for you to decide.

  4. Cutover

    There is no financial cutover on this route. After a short freeze on changes in Document Locator, a final pass over a weekend picks up what changed since the trial. Document Locator is kept read only as the fall-back record.

Fixed price, agreed after the analysis. How NewLaw moves legal data

Start

Start this migration

Tell us what is in Document Locator and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.

Step 1 of 5

Step 1 of 5: Start with the route

Moving fromDocument Locator
Moving toLawmatics

The route comes from this page. Four short steps follow. Nothing you send commits your firm to anything.

What happens after you send it

  1. A free first call

    We go through your answers with you and ask about anything they leave open.

  2. An analysis of what Document Locator holds

    What is in it, how its records link, and where each piece would sit in Lawmatics. Anything with no place there comes across as a note or stays behind, and you see which before the move.

  3. A fixed price in writing

    Set after the analysis, so it reflects what is in your data. You have it before any work starts.

Beyond the data

Setting up Lawmatics

Loaded data is not yet a working system. This is what NewLaw sets up in Lawmatics, beyond the migration, so that people can work in it from the first day.

In Lawmatics the design comes before the data. The pipeline stages, practice areas, custom fields and relationship types decide what the import can hold, and the forms and automations decide what the firm’s intake looks like from the first day. If a practice system sits behind it, the field mapping between the two is part of the same job.

Set-up decisions in Lawmatics

  • Pipelines and stages for intake and for open matters
  • Practice areas, sub-statuses, relationship types and the matter numbering pattern
  • Custom fields on matters, contacts and companies
  • Intake forms, booking links and e-signature document templates
  • Follow-up automations, with marketing sources and campaigns
  • Mail and calendar sync, user roles and practice system integration

Questions

Document Locator to Lawmatics: what firms ask

Can we simply copy the folders out through Windows?

It will produce files, and for a small set that may be all that is needed. It should not be relied on for a whole repository, because versions, profile metadata, permissions and audit history are in the database. The analysis establishes what the repository records about a document beyond the file itself.

How do documents get matched to matters when there is no matter record?

By the folder path or a profile field, whichever the firm used consistently. A matter list from the practice management system is matched against folder names, and the matches, near-matches and orphans are reported. Near-matches are confirmed by someone at the firm who knows the files.

Do documents from Document Locator keep their folders and dates in Lawmatics?

In part. Files and folders on each matter, added by upload or API, not by the spreadsheet import. The structure in Document Locator is mapped to what Lawmatics offers and you see the mapping before the load. File dates are carried.

Does everything in Document Locator have a place in Lawmatics?

Most of it does on paper. Notes and templates could not be confirmed from the two products’ own material, so those are checked in the analysis. Anything that turns out to have no place in Lawmatics is kept as a readable archive, and you see which before the move.

What has to be decided before Document Locator data is loaded into Lawmatics?

Documents, emails and custom fields are carried with mapping, so each mapping is agreed with you first. Notes and templates are confirmed in the analysis. The firm also decides which closed matters and how many versions of a document are in scope.

Where to start

Before and after the move.

Choosing the system comes before a migration. Setting it up and putting AI to work come after.

How we do itDiscovery to rollout, step by step

Document Locator and Lawmatics are the names and marks of their owners, used here only to identify the two systems.

Moving from Document Locator to Lawmatics?

Tell us what you are moving. You get a plan and a fixed price after the analysis.

We reply within one business day.