Data migration route
Alfresco to Lawmatics migration
Alfresco is a document management system, and Lawmatics is a cloud CRM and intake system. Lawmatics is built around people and enquiries, so the contact list leads this move, and the table shows what else has a place.
AlfrescoDocument management- Documents: Carried with mapping
- Custom fields: Carried with mapping
- Emails: Confirmed in the analysis
- Notes: Confirmed in the analysis
- Calendar: Confirmed in the analysis
- Tasks: Confirmed in the analysis
- Templates: Confirmed in the analysis
LawmaticsCloud- 2 mapped
- 5 to confirm
What moves
What moves from Alfresco to Lawmatics
Each row is a kind of record Alfresco holds, whether Lawmatics has a place for it, and what is planned. On this route two kinds need mapping and five kinds are confirmed in the analysis.
| Record | What is planned | ||
|---|---|---|---|
| DocumentsFiles stored in or linked from the system | HeldFiles in repository folders and site document libraries, with typed properties. | Has a place in partFiles and folders on each matter, added by upload or API, not by the spreadsheet import. | Carried with mapping |
| EmailsEmails saved to matters or to the store | To be confirmedDepends on the modules and integrations installed. | Has a place in partEmails reach a matter through mail sync from a connected mailbox. | Confirmed in the analysis |
| NotesFile notes, matter notes and contact notes | To be confirmed | Has a placeNotes on matters, contacts and companies. | Confirmed in the analysis |
| CalendarAppointments, court dates and deadlines | To be confirmed | Has a placeAppointments, called events, with types and locations. | Confirmed in the analysis |
| TasksTo-dos and workflow steps assigned to people | To be confirmedWorkflow tasks exist where the process services are in use. | Has a place | Confirmed in the analysis |
| Custom fieldsFields and record types the firm added itself | HeldCustom types, aspects and properties defined in a content model. | Has a placeMatter, contact and company fields. A field must exist before data is imported into it. | Carried with mapping |
| TemplatesPrecedents, document templates and automation | To be confirmed | Has a place in partDocument and email templates are rebuilt with Lawmatics merge fields. | Confirmed in the analysis |
What the plans mean
- Carried with mapping
- Lawmatics holds this differently, or in part. Each field or value is matched to its place before loading, and you see the mapping first.
- Confirmed in the analysis
- We could not confirm this from the two products’ own material, so it is checked against your data before the plan is fixed.
The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.
This kind of move
Mostly a contact list, cleaned before it lands.
Lawmatics is built for contacts, leads and the conversations around them. What Alfresco can offer it first is a list of people and companies, and sometimes a history that can be attached as notes. Whether anything else it holds has a place depends on what Lawmatics keeps besides contacts, and the table above shows that kind by kind. What has no place stays where it is or is archived.
A contact list taken from a system that was never a CRM needs work before it is useful. Names are split or joined differently, the same client appears under several spellings, and there is no record of who agreed to be contacted. The list is cleaned and de-duplicated, matched against what Lawmatics already holds, and loaded with a source tag, so the firm can tell these contacts from the ones that came through intake.
How Alfresco is run at the firm is settled at the start of the analysis, because its maker’s own material does not settle it. The usual arrangement is assumed here. Alfresco runs on the firm’s own equipment, so the data is collected there: a copy of the database and the folders its documents sit in, taken with the firm’s IT provider or over a remote session. Lawmatics is hosted by its maker, so loading depends on the import tools and access it provides. The old machine is kept, read only, as the fall-back record.
Where the data is now
Leaving Alfresco
No two Alfresco installations are alike, because the content model is written for each customer. A move off it begins by reading that model: which custom types and aspects exist, what properties they carry, and how the firm used sites and folders to stand for clients and matters. Only then can anyone say which properties are matter numbers and which are noise.
Read the content model
Document types, their properties and the aspects applied to them are defined in content models specific to the installation. A property might be called matterRef at one firm and caseNo at another. The model files and a sample of live documents are examined together to build the field list the mapping works from.
Versioning is not always on
Alfresco’s documentation notes that content created in the repository is not versioned by default: history is kept once versioning has been applied to the item. So some documents will have a full history and others a single state. The extraction records which is which instead of assuming every file has versions.
Sites, libraries and plain folders
Content can sit in a site’s document library or in ordinary repository folders outside any site. Firms often have both: sites created per client or project, and an older folder tree brought in from a file server. Each is walked separately, and an item filed in more than one place is counted once.
Customisations hold business rules
Folder rules, scripts and workflows are commonly added to file documents automatically, stamp metadata or route approvals. They are configuration, not data, and they do not move. The analysis lists the ones that still run, so the firm can decide which behaviours it needs the new system to reproduce.
Community or supported edition
Which edition and version is running affects how the repository is reached and what help is available with it. A self-hosted Community Edition is entirely in the firm’s hands. The edition, the version and any add-on modules installed are recorded at the start of the analysis.
Where it is going
Arriving in Lawmatics
Lawmatics takes matters, contacts and companies from CSV files, and its API accepts notes, tasks, appointments, files, time entries and invoices. It is an intake and client relationship system, so a firm arriving from full practice management has to decide what it is for. People and matters load well. There is no general ledger, and years of billing history have no natural home.
Contacts and matters load separately
The import expects two spreadsheets: one for contacts or companies with no case, such as referrers and other lawyers, and one for matters. A matter import creates the matter and its primary contact together. Every matter has exactly one primary contact, so joint clients are loaded as one primary and one relationship.
Set up before loading
Owner, stage, practice area, source and campaign are matched by name. A value on the spreadsheet that does not match one in Lawmatics exactly creates a new one, which is how a firm ends up with two spellings of the same practice area. Users, pipelines, practice areas and marketing sources are set up first, and custom fields must exist before data is loaded into them.
Statuses and matter numbers
Each imported matter must be PNC (potential new client), Hired or Lost, with open and closed handled as sub-statuses the firm creates. The case number is a system field assigned by an auto-numbering pattern and cannot be edited by hand afterwards. Whether old matter numbers can be loaded into it, or belong in a custom field, is tested in the trial load.
Duplicates are matched by email
With Match Contacts by Email switched on, a contact whose email already exists is skipped or updated, never doubled. Names and phone numbers are not checked. Matters are not deduplicated at all, so two rows with one email create two matters on one contact. Clean-up therefore happens in the spreadsheet, and automations are switched off for every load.
What has no place
There is no general ledger. The Time & Billing module holds time entries, expenses, invoices and a trust account with a running balance per matter, and past invoices are entered as already sent and then marked paid. A firm that needs its full accounting history keeps the old system read only or carries the books in an accounting package.
How NewLaw runs it
Four steps, in this order.
Nothing financial lands in Lawmatics on this route, which makes it repeatable: a load can be run again until it is right.
Analysis
We read what Alfresco holds and how it is organised, then agree with you where each kind of record will sit in Lawmatics. Anything with no place there stays behind or is archived, and you see which before the move.
Clean-up
Duplicate clients, matters and folders are merged where they can be identified, and naming is put into one format, before anything is copied. It is not always possible to find every one, so some may carry across.
Trial load
A trial is loaded into Lawmatics and checked against Alfresco: record and file counts, the links between records, document dates, and a sample opened by your own people. Exceptions are listed for you to decide.
Cutover
There is no financial cutover on this route. After a short freeze on changes in Alfresco, a final pass over a weekend picks up what changed since the trial. Alfresco is kept read only as the fall-back record.
Fixed price, agreed after the analysis. How NewLaw moves legal data
Start
Start this migration
Tell us what is in Alfresco and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.
Step 1 of 5
What happens after you send it
- A free first call
We go through your answers with you and ask about anything they leave open.
- An analysis of what Alfresco holds
What is in it, how its records link, and where each piece would sit in Lawmatics. Anything with no place there comes across as a note or stays behind, and you see which before the move.
- A fixed price in writing
Set after the analysis, so it reflects what is in your data. You have it before any work starts.
Beyond the data
Setting up Lawmatics
Loaded data is not yet a working system. This is what NewLaw sets up in Lawmatics, beyond the migration, so that people can work in it from the first day.
In Lawmatics the design comes before the data. The pipeline stages, practice areas, custom fields and relationship types decide what the import can hold, and the forms and automations decide what the firm’s intake looks like from the first day. If a practice system sits behind it, the field mapping between the two is part of the same job.
Set-up decisions in Lawmatics
- Pipelines and stages for intake and for open matters
- Practice areas, sub-statuses, relationship types and the matter numbering pattern
- Custom fields on matters, contacts and companies
- Intake forms, booking links and e-signature document templates
- Follow-up automations, with marketing sources and campaigns
- Mail and calendar sync, user roles and practice system integration
Questions
Alfresco to Lawmatics: what firms ask
Alfresco is not a legal system. Can its documents still be loaded into one by matter?
Yes, if each document can be tied to a matter by something reliable: a property, the site it is in, or its folder path. The analysis tests that on the real data and reports how many documents fall outside the rule. Those are assigned by hand, loaded to a holding matter, or kept only in the old system.
Do metadata and versions come across?
Properties can be extracted for every item, and versions where versioning was applied. Where they land depends on the destination: a legal document system has a fixed set of profile fields plus some custom ones. Properties with no equivalent are written into a note or description, or left behind, and the firm sees the list first.
Do documents from Alfresco keep their folders and dates in Lawmatics?
In part. Files and folders on each matter, added by upload or API, not by the spreadsheet import. The structure in Alfresco is mapped to what Lawmatics offers and you see the mapping before the load. File dates are carried.
Does everything in Alfresco have a place in Lawmatics?
Most of it does on paper. Emails, notes, calendar entries, tasks and templates could not be confirmed from the two products’ own material, so those are checked in the analysis. Anything that turns out to have no place in Lawmatics is kept as a readable archive, and you see which before the move.
What has to be decided before Alfresco data is loaded into Lawmatics?
Documents and custom fields are carried with mapping, so each mapping is agreed with you first. Emails, notes, calendar entries, tasks and templates are confirmed in the analysis. The firm also decides which closed matters and how many versions of a document are in scope.
Other routes
Other routes from Alfresco and into Lawmatics
Where to start
Before and after the move.
Choosing the system comes before a migration. Setting it up and putting AI to work come after.
Choose your systems
Technology stack selection
Decide which practice management system your firm runs, with the evidence and the cost beside it.
About four weeks for a firm of about 15 people. Fixed price, set after a free first call.
Move your data
Data migration
Your data is cleaned up before anything moves, then a trial load is checked against the old system.
Fixed price, agreed after the analysis.
Set up your new system
Implementation
Your new system set up around the way your firm works: configuration, document automation and training.
A small firm of 1 to 10 users typically takes 4 to 8 weeks. A mid-sized firm of 10 to 50 users takes 8 to 16 weeks.
Put AI to work
AI advisory and enablement
A small group of your people learn to use an approved AI tool on real work, under written rules.
Two to four weeks for a small first group. Fixed price, set after a free first call.
Alfresco and Lawmatics are the names and marks of their owners, used here only to identify the two systems.
Moving from Alfresco to Lawmatics?
Tell us what you are moving. You get a plan and a fixed price after the analysis.
We reply within one business day.