Data migration route
Docrio to Filevine migration
Docrio is a cloud document management system, and Filevine is a cloud case management system. The move is matching each file in Docrio to its case in Filevine.
DocrioCloud- Documents: Carried across
- Templates: Carried with mapping
- Emails: Confirmed in the analysis
- Tasks: Confirmed in the analysis
- Custom fields: Confirmed in the analysis
FilevineCloud- 1 carried
- 1 mapped
- 3 to confirm
What moves
What moves from Docrio to Filevine
Each row is a kind of record Docrio holds, whether Filevine has a place for it, and what is planned. On this route one kind of record carries across, one kind needs mapping and three kinds are confirmed in the analysis.
| Record | What is planned | ||
|---|---|---|---|
| DocumentsFiles stored in or linked from the system | HeldFiled against Litify matters, with tags and editable file information. | Has a placeDocs section with folders. Templated project folders can be set per type. | Carried across |
| EmailsEmails saved to matters or to the store | To be confirmed | Has a placeHeld in the activity feed of the project. | Confirmed in the analysis |
| TasksTo-dos and workflow steps assigned to people | To be confirmedTasks can be raised against a document; they are Litify records. | Has a place | Confirmed in the analysis |
| Custom fieldsFields and record types the firm added itself | To be confirmed | Has a placeCustom sections and fields per project type. | Confirmed in the analysis |
| TemplatesPrecedents, document templates and automation | HeldDocument generation templates with merge fields and conditional logic. | Has a place in partTemplates are rebuilt as Filevine document templates. They are not converted. | Carried with mapping |
What the plans mean
- Carried across
- Filevine has a place for this kind of record. It is loaded there and checked against Docrio.
- Carried with mapping
- Filevine holds this differently, or in part. Each field or value is matched to its place before loading, and you see the mapping first.
- Confirmed in the analysis
- We could not confirm this from the two products’ own material, so it is checked against your data before the plan is fixed.
The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.
This kind of move
Every document goes to the case it belongs to.
A case management system expects each document to sit on a case, usually in a category such as correspondence, medical records or court documents. Docrio organises files its own way, by profile or by folder. So the move needs two rules: which case a file belongs to, and which category it goes in. The first comes from client and matter references or folder names. The second comes from a document type or a subfolder, and where neither exists the files arrive uncategorised and are marked as such.
Cases must exist in Filevine before documents can be attached to them. If the system is already live, files are matched to its case list and the unmatched ones are reported. If it is new, the case list is created first. Dates, authors and file names are kept. Email comes across as message files. Where several versions of a document exist, the firm chooses between loading the latest and loading them all.
Both are hosted by their makers, so nothing is collected from the firm’s office. What can be taken out of Docrio depends on its export tools and on what its maker provides on request, and that is confirmed during the analysis, before a date is set. The subscription to Docrio is kept running until the checks on Filevine are finished.
Where the data is now
Leaving Docrio
Docrio cannot be separated from the Litify system it sits in. Each file is tied to a Litify record, and that record supplies the matter number, client and case type. Leaving it means extracting the files together with the identifiers of the records they hang from. Usually it happens as part of moving the whole Litify system, not the documents alone.
Files hang off Litify records
A document’s context is the record it was saved to, normally a matter. That relationship is how a file finds its matter in the destination. Keeping the record identifier with every file is what allows it to be joined to the matter export and filed under the right matter.
Folders and tags by case type
Litify firms normally set a standard folder structure for each case type and add tags on top. The structure for a motor vehicle claim differs from the one for a mass tort. Each case type’s folder set is mapped separately, and tags become document categories or are written into the name.
Templates do not travel
Generation templates read fields from Litify by name. In another system those fields are called something else, or do not exist. The documents already generated move as ordinary files. The templates themselves are rebuilt in the destination’s own automation, starting with the ones the firm uses most.
Confirm where files are stored
How Docrio stores file content, and the route for exporting it in bulk, is confirmed with the firm’s Litify administrator at the start. Access is given in whatever way the firm decides. Volumes in injury practices are large, with medical records and video, so transfer time is part of the plan.
Where it is going
Arriving in Filevine
Loading a firm into Filevine depends on the project types being built first. Until the sections and fields exist there is nowhere for the data to go, so configuration and migration are planned together. The old system’s parties, insurers, providers and key dates are mapped to sections, and its notes and emails are loaded into each project’s activity feed.
Project types before data
Each area of practice needs a project type with its sections, fields and phases defined in the Customs Editor. Changes made there apply to every project of that type. The types are drafted from the old system’s data, tested with a few real cases, and only then is the bulk load run.
One contact card per person
Contacts are held as contact cards. A doctor or adjuster who appears on many projects is best loaded as one card, not one for each project. Duplicates in the old system are merged before loading where they can be identified. Loading them as they are produces several cards for the same person, and staff then pick the wrong one when adding a party.
Lists become collection items
Anything the old system held as a list against a matter, such as providers, liens, insurance policies or expenses, is loaded as items in a collection section. Each column needs a matching field. Totals per project are compared with the old system afterwards, since those figures feed the settlement and disbursal sheets.
History goes into the feed
File notes, emails and completed tasks from the old system are loaded into the activity feed with their original dates and authors. Authors must exist as users or be recorded in the text. The feed is long on an old case, so staff are shown how to filter it before go-live.
Billing is a separate switch
The Billing section only appears once Billing is enabled for the firm. Time entries, invoices and trust balances from the old system need that in place before they can be loaded. A firm that leaves it off can still record case costs in a collection section built for the purpose.
How NewLaw runs it
Four steps, in this order.
Nothing financial lands in Filevine on this route, which makes it repeatable: a load can be run again until it is right.
Analysis
We read what Docrio holds and how it is organised, then agree with you where each kind of record will sit in Filevine. Anything with no place there stays behind or is archived, and you see which before the move.
Clean-up
Duplicate clients, matters and folders are merged where they can be identified, and naming is put into one format, before anything is copied. It is not always possible to find every one, so some may carry across.
Trial load
A trial is loaded into Filevine and checked against Docrio: record and file counts, the links between records, document dates, and a sample opened by your own people. Exceptions are listed for you to decide.
Cutover
There is no financial cutover on this route. After a short freeze on changes in Docrio, a final pass over a weekend picks up what changed since the trial. Docrio is kept read only as the fall-back record.
Fixed price, agreed after the analysis. How NewLaw moves legal data
Start
Start this migration
Tell us what is in Docrio and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.
Step 1 of 5
What happens after you send it
- A free first call
We go through your answers with you and ask about anything they leave open.
- An analysis of what Docrio holds
What is in it, how its records link, and where each piece would sit in Filevine. Anything with no place there comes across as a note or stays behind, and you see which before the move.
- A fixed price in writing
Set after the analysis, so it reflects what is in your data. You have it before any work starts.
Beyond the data
Setting up Filevine
Loaded data is not yet a working system. This is what NewLaw sets up in Filevine, beyond the migration, so that people can work in it from the first day.
Filevine arrives as a platform to be configured, and most of the implementation is design. Someone has to decide what a project looks like for each kind of work the firm does, what moves it from one phase to the next, and who can see what. Those decisions are made with the people who run the files, then built and tested.
Set-up decisions in Filevine
- Design project types, sections and fields for each practice area
- Define phases and the tasks each phase should trigger
- Build document templates that fill from project fields
- Set teams, permissions and protected sections for restricted matters
- Decide whether Billing and Payments are switched on
- Connect Lead Docket so signed leads become projects
Questions
Docrio to Filevine: what firms ask
We are leaving Litify. Are our documents part of that move?
They should be scoped explicitly. A matter export on its own should not be assumed to contain the documents, and the files may come out by a different route from the Litify data. The plan covers both and joins them on the matter, and document counts are checked per matter after the trial load.
Can we keep Litify and move only the documents to iManage or NetDocuments?
Litify publishes integrations with both, so that arrangement exists. The existing files are then moved from Docrio into workspaces that match the Litify matters, and new documents are saved through the integration. The matter number is the join, so it has to be identical on both sides before the load.
Do documents from Docrio keep their folders and dates in Filevine?
Filevine stores documents. Docs section with folders. Templated project folders can be set per type. Each file is placed under the client and matter it came from, and created and modified dates are carried, so a document still shows when it was written. The trial load is checked by count and by opening a sample.
Does everything in Docrio have a place in Filevine?
Most of it does on paper. Emails, tasks and custom fields could not be confirmed from the two products’ own material, so those are checked in the analysis. Anything that turns out to have no place in Filevine is kept as a readable archive, and you see which before the move.
What has to be decided before Docrio data is loaded into Filevine?
Templates are carried with mapping, so each mapping is agreed with you first. Emails, tasks and custom fields are confirmed in the analysis. The firm also decides which closed matters and how many versions of a document are in scope.
Other routes
Other routes from Docrio and into Filevine
Where to start
Before and after the move.
Choosing the system comes before a migration. Setting it up and putting AI to work come after.
Choose your systems
Technology stack selection
Decide which practice management system your firm runs, with the evidence and the cost beside it.
About four weeks for a firm of about 15 people. Fixed price, set after a free first call.
Move your data
Data migration
Your data is cleaned up before anything moves, then a trial load is checked against the old system.
Fixed price, agreed after the analysis.
Set up your new system
Implementation
Your new system set up around the way your firm works: configuration, document automation and training.
A small firm of 1 to 10 users typically takes 4 to 8 weeks. A mid-sized firm of 10 to 50 users takes 8 to 16 weeks.
Put AI to work
AI advisory and enablement
A small group of your people learn to use an approved AI tool on real work, under written rules.
Two to four weeks for a small first group. Fixed price, set after a free first call.
Docrio and Filevine are the names and marks of their owners, used here only to identify the two systems.
Moving from Docrio to Filevine?
Tell us what you are moving. You get a plan and a fixed price after the analysis.
We reply within one business day.