Data migration route
Alfresco to Gladiate migration
Alfresco is a document management system, and Gladiate is a cloud case management system for personal injury work. The move is matching each file in Alfresco to its case in Gladiate.
AlfrescoDocument management- Documents: Carried across
- Emails: Confirmed in the analysis
- Notes: Confirmed in the analysis
- Calendar: Confirmed in the analysis
- Tasks: Confirmed in the analysis
- Custom fields: Confirmed in the analysis
- Templates: Confirmed in the analysis
GladiateCloud- 1 carried
- 6 to confirm
What moves
What moves from Alfresco to Gladiate
Each row is a kind of record Alfresco holds, whether Gladiate has a place for it, and what is planned. On this route one kind of record carries across and six kinds are confirmed in the analysis.
| Record | What is planned | ||
|---|---|---|---|
| DocumentsFiles stored in or linked from the system | HeldFiles in repository folders and site document libraries, with typed properties. | Has a placeFiled to the firm’s folder structure. | Carried across |
| EmailsEmails saved to matters or to the store | To be confirmedDepends on the modules and integrations installed. | To be confirmed | Confirmed in the analysis |
| NotesFile notes, matter notes and contact notes | To be confirmed | To be confirmed | Confirmed in the analysis |
| CalendarAppointments, court dates and deadlines | To be confirmed | Has a placeEvents sync with Outlook and Google Calendar. | Confirmed in the analysis |
| TasksTo-dos and workflow steps assigned to people | To be confirmedWorkflow tasks exist where the process services are in use. | Has a placeTasks and task plans. | Confirmed in the analysis |
| Custom fieldsFields and record types the firm added itself | HeldCustom types, aspects and properties defined in a content model. | To be confirmed | Confirmed in the analysis |
| TemplatesPrecedents, document templates and automation | To be confirmed | Has a place in partFirm templates are set up again in Gladiate. Old templates are not converted. | Confirmed in the analysis |
What the plans mean
- Carried across
- Gladiate has a place for this kind of record. It is loaded there and checked against Alfresco.
- Confirmed in the analysis
- We could not confirm this from the two products’ own material, so it is checked against your data before the plan is fixed.
The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.
This kind of move
Every document goes to the case it belongs to.
A case management system expects each document to sit on a case, usually in a category such as correspondence, medical records or court documents. Alfresco organises files its own way, by profile or by folder. So the move needs two rules: which case a file belongs to, and which category it goes in. The first comes from client and matter references or folder names. The second comes from a document type or a subfolder, and where neither exists the files arrive uncategorised and are marked as such.
Cases must exist in Gladiate before documents can be attached to them. If the system is already live, files are matched to its case list and the unmatched ones are reported. If it is new, the case list is created first. Dates, authors and file names are kept. Email comes across as message files. Where several versions of a document exist, the firm chooses between loading the latest and loading them all.
How Alfresco is run at the firm is settled at the start of the analysis, because its maker’s own material does not settle it. The usual arrangement is assumed here. Alfresco runs on the firm’s own equipment, so the data is collected there: a copy of the database and the folders its documents sit in, taken with the firm’s IT provider or over a remote session. Gladiate is hosted by its maker, so loading depends on the import tools and access it provides. The old machine is kept, read only, as the fall-back record.
Where the data is now
Leaving Alfresco
No two Alfresco installations are alike, because the content model is written for each customer. A move off it begins by reading that model: which custom types and aspects exist, what properties they carry, and how the firm used sites and folders to stand for clients and matters. Only then can anyone say which properties are matter numbers and which are noise.
Read the content model
Document types, their properties and the aspects applied to them are defined in content models specific to the installation. A property might be called matterRef at one firm and caseNo at another. The model files and a sample of live documents are examined together to build the field list the mapping works from.
Versioning is not always on
Alfresco’s documentation notes that content created in the repository is not versioned by default: history is kept once versioning has been applied to the item. So some documents will have a full history and others a single state. The extraction records which is which instead of assuming every file has versions.
Sites, libraries and plain folders
Content can sit in a site’s document library or in ordinary repository folders outside any site. Firms often have both: sites created per client or project, and an older folder tree brought in from a file server. Each is walked separately, and an item filed in more than one place is counted once.
Customisations hold business rules
Folder rules, scripts and workflows are commonly added to file documents automatically, stamp metadata or route approvals. They are configuration, not data, and they do not move. The analysis lists the ones that still run, so the firm can decide which behaviours it needs the new system to reproduce.
Community or supported edition
Which edition and version is running affects how the repository is reached and what help is available with it. A self-hosted Community Edition is entirely in the firm’s hands. The edition, the version and any add-on modules installed are recorded at the start of the analysis.
Where it is going
Arriving in Gladiate
Gladiate is a destination for personal injury firms, and what it expects is injury data: a client, an incident, coverage, providers and a case status. Loading a firm into it means shaping the old system’s records into that pattern and preparing the templates, task plans and folder structure that the vendor’s onboarding asks each firm to supply.
Injury fields come first
Coverage, liability and medical details are what the product is designed to put in front of staff. In the old system they may be in custom fields, notes or a spreadsheet. They are pulled into columns during the analysis, so a loaded case shows its insurer and policy details and not an empty panel.
Templates and task plans
The vendor’s onboarding has each firm set up its own document templates, task plans, litigation deadlines and questionnaires. These are prepared from what the firm uses now. Merge fields in old templates are replaced with Gladiate’s, and task plans are written down stage by stage before anyone builds them.
A folder structure per case
Documents are filed in a folder structure the firm defines. The old system’s folders or categories are mapped to it once, and every case is loaded to the same pattern. Files with no clear category go to a holding folder on the case and are listed, not scattered.
What it may not hold
Time records, invoices and trust ledgers are not described on the vendor’s public pages. A firm that needs those carried over has it confirmed in the analysis. If there is no place for them, balances stay in the accounting package and the detailed history is kept in the old system, read only.
How NewLaw runs it
Four steps, in this order.
Nothing financial lands in Gladiate on this route, which makes it repeatable: a load can be run again until it is right.
Analysis
We read what Alfresco holds and how it is organised, then agree with you where each kind of record will sit in Gladiate. Anything with no place there stays behind or is archived, and you see which before the move.
Clean-up
Duplicate clients, matters and folders are merged where they can be identified, and naming is put into one format, before anything is copied. It is not always possible to find every one, so some may carry across.
Trial load
A trial is loaded into Gladiate and checked against Alfresco: record and file counts, the links between records, document dates, and a sample opened by your own people. Exceptions are listed for you to decide.
Cutover
There is no financial cutover on this route. After a short freeze on changes in Alfresco, a final pass over a weekend picks up what changed since the trial. Alfresco is kept read only as the fall-back record.
Fixed price, agreed after the analysis. How NewLaw moves legal data
Start
Start this migration
Tell us what is in Alfresco and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.
Step 1 of 5
What happens after you send it
- A free first call
We go through your answers with you and ask about anything they leave open.
- An analysis of what Alfresco holds
What is in it, how its records link, and where each piece would sit in Gladiate. Anything with no place there comes across as a note or stays behind, and you see which before the move.
- A fixed price in writing
Set after the analysis, so it reflects what is in your data. You have it before any work starts.
Beyond the data
Setting up Gladiate
Loaded data is not yet a working system. This is what NewLaw sets up in Gladiate, beyond the migration, so that people can work in it from the first day.
Gladiate is delivered ready for injury work, so set-up is about making it the firm’s own. The vendor’s onboarding covers templates, task plans, folder structure, litigation deadlines and client questionnaires. Each of those is a decision the firm has to make, and it goes faster when current practice has been written down beforehand.
Set-up decisions in Gladiate
- Set up and test the firm’s document templates
- Write task plans for each stage of a case
- Agree one folder structure for case documents
- Enter litigation deadlines for the firm’s jurisdictions
- Prepare client questionnaires, surveys and scheduled case updates
- Connect Outlook or Google calendars for two-way sync
Questions
Alfresco to Gladiate: what firms ask
Alfresco is not a legal system. Can its documents still be loaded into one by matter?
Yes, if each document can be tied to a matter by something reliable: a property, the site it is in, or its folder path. The analysis tests that on the real data and reports how many documents fall outside the rule. Those are assigned by hand, loaded to a holding matter, or kept only in the old system.
Do metadata and versions come across?
Properties can be extracted for every item, and versions where versioning was applied. Where they land depends on the destination: a legal document system has a fixed set of profile fields plus some custom ones. Properties with no equivalent are written into a note or description, or left behind, and the firm sees the list first.
Do documents from Alfresco keep their folders and dates in Gladiate?
Gladiate stores documents. Filed to the firm’s folder structure. Each file is placed under the client and matter it came from, and created and modified dates are carried, so a document still shows when it was written. The trial load is checked by count and by opening a sample.
Does everything in Alfresco have a place in Gladiate?
Most of it does on paper. Emails, notes, calendar entries, tasks, custom fields and templates could not be confirmed from the two products’ own material, so those are checked in the analysis. Anything that turns out to have no place in Gladiate is kept as a readable archive, and you see which before the move.
What has to be decided before Alfresco data is loaded into Gladiate?
Emails, notes, calendar entries, tasks, custom fields and templates are confirmed in the analysis. The firm also decides which closed matters and how many versions of a document are in scope.
Other routes
Other routes from Alfresco and into Gladiate
Where to start
Before and after the move.
Choosing the system comes before a migration. Setting it up and putting AI to work come after.
Choose your systems
Technology stack selection
Decide which practice management system your firm runs, with the evidence and the cost beside it.
About four weeks for a firm of about 15 people. Fixed price, set after a free first call.
Move your data
Data migration
Your data is cleaned up before anything moves, then a trial load is checked against the old system.
Fixed price, agreed after the analysis.
Set up your new system
Implementation
Your new system set up around the way your firm works: configuration, document automation and training.
A small firm of 1 to 10 users typically takes 4 to 8 weeks. A mid-sized firm of 10 to 50 users takes 8 to 16 weeks.
Put AI to work
AI advisory and enablement
A small group of your people learn to use an approved AI tool on real work, under written rules.
Two to four weeks for a small first group. Fixed price, set after a free first call.
Alfresco and Gladiate are the names and marks of their owners, used here only to identify the two systems.
Moving from Alfresco to Gladiate?
Tell us what you are moving. You get a plan and a fixed price after the analysis.
We reply within one business day.