Data migration route
iManage Work to Lawmatics migration
iManage Work is a server-based document management system, and Lawmatics is a cloud CRM and intake system. Lawmatics is built around people and enquiries, so the contact list leads this move, and the table shows what else has a place.
iManage WorkServer- Matters: Carried across
- Tasks: Carried across
- Documents: Carried with mapping
- Emails: Carried with mapping
- Custom fields: Carried with mapping
- Templates: Carried with mapping
LawmaticsCloud- 2 carried
- 4 mapped
What moves
What moves from iManage Work to Lawmatics
Each row is a kind of record iManage Work holds, whether Lawmatics has a place for it, and what is planned. On this route two kinds of record carry across and four kinds need mapping.
| Record | What is planned | ||
|---|---|---|---|
| MattersMatters or cases, with their numbers, types, parties and status | Held in partA workspace usually stands for a matter, with client and matter held as custom1 and custom2. | Has a placeLoaded from CSV with a status of PNC, Hired or Lost and a pipeline stage. | Carried across |
| DocumentsFiles stored in or linked from the system | HeldEach is identified by its library name, a document number and a version number. | Has a place in partFiles and folders on each matter, added by upload or API, not by the spreadsheet import. | Carried with mapping |
| EmailsEmails saved to matters or to the store | HeldFiled emails are stored as documents, usually in email folders inside the workspace. | Has a place in partEmails reach a matter through mail sync from a connected mailbox. | Carried with mapping |
| TasksTo-dos and workflow steps assigned to people | Held in partTask lists are kept in iManage Tracker, a separate product. | Has a place | Carried across |
| Custom fieldsFields and record types the firm added itself | HeldCustom profile fields with validated lists, captioned by the firm, such as practice area. | Has a placeMatter, contact and company fields. A field must exist before data is imported into it. | Carried with mapping |
| TemplatesPrecedents, document templates and automation | Held in partPrecedents are held as documents. Workspace templates only set folder structure. | Has a place in partDocument and email templates are rebuilt with Lawmatics merge fields. | Carried with mapping |
What the plans mean
- Carried across
- Lawmatics has a place for this kind of record. It is loaded there and checked against iManage Work.
- Carried with mapping
- Lawmatics holds this differently, or in part. Each field or value is matched to its place before loading, and you see the mapping first.
The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.
This kind of move
Mostly a contact list, cleaned before it lands.
Lawmatics is built for contacts, leads and the conversations around them. What iManage Work can offer it first is a list of people and companies, and sometimes a history that can be attached as notes. Whether anything else it holds has a place depends on what Lawmatics keeps besides contacts, and the table above shows that kind by kind. What has no place stays where it is or is archived.
A contact list taken from a system that was never a CRM needs work before it is useful. Names are split or joined differently, the same client appears under several spellings, and there is no record of who agreed to be contacted. The list is cleaned and de-duplicated, matched against what Lawmatics already holds, and loaded with a source tag, so the firm can tell these contacts from the ones that came through intake.
iManage Work runs on the firm’s own equipment, so the data is collected there: a copy of the database and the folders its documents sit in, taken with the firm’s IT provider or over a remote session. Lawmatics is hosted by its maker, so loading depends on the import tools and access it provides. The old machine is kept, read only, as the fall-back record.
Where the data is now
Leaving iManage Work
Moving off an on-premises library starts with access to its database and its file store, because the profiles, security and version history are read from the database. The stored files on their own are not usable: each one has to be matched to its profile. Most of the planning goes into client and matter numbers, security, and which versions come across.
The database carries the meaning
The title, author, client, matter, class and folder location of every document are rows in the library database, not properties of the stored file. An extraction that copies only the file store brings none of that with it. The database and the files therefore have to be collected together, at the same point in time.
Client and matter are custom fields
Custom1 and custom2 are a parent and child pair, normally captioned Client and Matter, and every value has to exist in a validated list. That list is usually fed from the practice management system. The analysis compares it with the destination’s matter list, since closed or renumbered matters often exist in one and not the other.
Document numbers get quoted
A document is identified by library, number and version, and lawyers quote those numbers in emails, footers and other documents. The firm decides whether every version moves or only the latest, and whether the old number is kept as a searchable field or in the document name so an old reference can still be traced.
Security is layered
Each workspace, folder and document has a default security of private, view, public or inherited, and users or groups can be granted or denied access on top of that. Private documents and walled-off matters are either reproduced in the destination or deliberately opened up. That is decided group by group before the trial load.
Emails are documents here
A filed email is stored as a document in its own right, often in an email folder inside the workspace, and the same message may have been filed by several people. Volumes are large. The trial load reports how many emails each matter holds and how repeated copies were treated.
Where it is going
Arriving in Lawmatics
Lawmatics takes matters, contacts and companies from CSV files, and its API accepts notes, tasks, appointments, files, time entries and invoices. It is an intake and client relationship system, so a firm arriving from full practice management has to decide what it is for. People and matters load well. There is no general ledger, and years of billing history have no natural home.
Contacts and matters load separately
The import expects two spreadsheets: one for contacts or companies with no case, such as referrers and other lawyers, and one for matters. A matter import creates the matter and its primary contact together. Every matter has exactly one primary contact, so joint clients are loaded as one primary and one relationship.
Set up before loading
Owner, stage, practice area, source and campaign are matched by name. A value on the spreadsheet that does not match one in Lawmatics exactly creates a new one, which is how a firm ends up with two spellings of the same practice area. Users, pipelines, practice areas and marketing sources are set up first, and custom fields must exist before data is loaded into them.
Statuses and matter numbers
Each imported matter must be PNC (potential new client), Hired or Lost, with open and closed handled as sub-statuses the firm creates. The case number is a system field assigned by an auto-numbering pattern and cannot be edited by hand afterwards. Whether old matter numbers can be loaded into it, or belong in a custom field, is tested in the trial load.
Duplicates are matched by email
With Match Contacts by Email switched on, a contact whose email already exists is skipped or updated, never doubled. Names and phone numbers are not checked. Matters are not deduplicated at all, so two rows with one email create two matters on one contact. Clean-up therefore happens in the spreadsheet, and automations are switched off for every load.
What has no place
There is no general ledger. The Time & Billing module holds time entries, expenses, invoices and a trust account with a running balance per matter, and past invoices are entered as already sent and then marked paid. A firm that needs its full accounting history keeps the old system read only or carries the books in an accounting package.
How NewLaw runs it
Four steps, in this order.
Nothing financial lands in Lawmatics on this route, which makes it repeatable: a load can be run again until it is right.
Analysis
We read what iManage Work holds and how it is organised, then agree with you where each kind of record will sit in Lawmatics. Anything with no place there stays behind or is archived, and you see which before the move.
Clean-up
Duplicate clients, matters and folders are merged where they can be identified, and naming is put into one format, before anything is copied. It is not always possible to find every one, so some may carry across.
Trial load
A trial is loaded into Lawmatics and checked against iManage Work: record and file counts, the links between records, document dates, and a sample opened by your own people. Exceptions are listed for you to decide.
Cutover
There is no financial cutover on this route. After a short freeze on changes in iManage Work, a final pass over a weekend picks up what changed since the trial. iManage Work is kept read only as the fall-back record.
Fixed price, agreed after the analysis. How NewLaw moves legal data
Start
Start this migration
Tell us what is in iManage Work and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.
Step 1 of 5
What happens after you send it
- A free first call
We go through your answers with you and ask about anything they leave open.
- An analysis of what iManage Work holds
What is in it, how its records link, and where each piece would sit in Lawmatics. Anything with no place there comes across as a note or stays behind, and you see which before the move.
- A fixed price in writing
Set after the analysis, so it reflects what is in your data. You have it before any work starts.
Beyond the data
Setting up Lawmatics
Loaded data is not yet a working system. This is what NewLaw sets up in Lawmatics, beyond the migration, so that people can work in it from the first day.
In Lawmatics the design comes before the data. The pipeline stages, practice areas, custom fields and relationship types decide what the import can hold, and the forms and automations decide what the firm’s intake looks like from the first day. If a practice system sits behind it, the field mapping between the two is part of the same job.
Set-up decisions in Lawmatics
- Pipelines and stages for intake and for open matters
- Practice areas, sub-statuses, relationship types and the matter numbering pattern
- Custom fields on matters, contacts and companies
- Intake forms, booking links and e-signature document templates
- Follow-up automations, with marketing sources and campaigns
- Mail and calendar sync, user roles and practice system integration
Questions
iManage Work to Lawmatics: what firms ask
Can we keep our iManage document numbers?
The number is assigned by the library, so the new system will issue its own. What can be kept is the old number as a reference: in a custom field, in the document name, or in a lookup list. Which is possible depends on the destination, and it is settled in the analysis because footers and old emails quote the numbers.
Do all versions of a document come across?
They can be extracted, since each version has its own profile. Whether the destination keeps them as versions of one document or as separate documents depends on that system. A common choice is every version for open matters and the latest version only for matters that closed some years ago.
Is moving to iManage Cloud the same job as moving to another product?
No. Going to iManage’s own cloud keeps the same structure of libraries, workspaces, profiles and security, and iManage publishes its own resources for that move. Moving to a different product means mapping each of those concepts onto something else, which is where the analysis time goes.
Do documents from iManage Work keep their folders and dates in Lawmatics?
In part. Files and folders on each matter, added by upload or API, not by the spreadsheet import. The structure in iManage Work is mapped to what Lawmatics offers and you see the mapping before the load. File dates are carried.
Does everything in iManage Work have a place in Lawmatics?
On paper, yes: each kind of record iManage Work holds has a place in Lawmatics. Whether every field fits is a separate question, and the analysis answers it field by field. Anything with no place comes across as a note or stays behind, and you see which before the move.
What has to be decided before iManage Work data is loaded into Lawmatics?
Documents, emails, custom fields and templates are carried with mapping, so each mapping is agreed with you first. The firm also decides which closed matters and how many versions of a document are in scope.
Other routes
Other routes from iManage Work and into Lawmatics
Where to start
Before and after the move.
Choosing the system comes before a migration. Setting it up and putting AI to work come after.
Choose your systems
Technology stack selection
Decide which practice management system your firm runs, with the evidence and the cost beside it.
About four weeks for a firm of about 15 people. Fixed price, set after a free first call.
Move your data
Data migration
Your data is cleaned up before anything moves, then a trial load is checked against the old system.
Fixed price, agreed after the analysis.
Set up your new system
Implementation
Your new system set up around the way your firm works: configuration, document automation and training.
A small firm of 1 to 10 users typically takes 4 to 8 weeks. A mid-sized firm of 10 to 50 users takes 8 to 16 weeks.
Put AI to work
AI advisory and enablement
A small group of your people learn to use an approved AI tool on real work, under written rules.
Two to four weeks for a small first group. Fixed price, set after a free first call.
iManage Work and Lawmatics are the names and marks of their owners, used here only to identify the two systems.
Moving from iManage Work to Lawmatics?
Tell us what you are moving. You get a plan and a fixed price after the analysis.
We reply within one business day.