Skip to content
NEWLAW.COM
+61 1300 495 281
Let’s talk

Data migration route

USB drives to Lawmatics migration

USB drives are plain files on equipment the firm controls, and Lawmatics is a cloud CRM and intake system. Lawmatics is built around people and enquiries, so the contact list leads this move, and the table shows what else has a place.

FromUSB drivesFiles
  1. Documents: Carried with mapping
  2. Emails: Carried with mapping
ToLawmaticsCloud
  • 2 mapped
What the two products hold. The analysis confirms it field by field.

What moves

What moves from USB drives to Lawmatics

Each row is a kind of record USB drives hold, whether Lawmatics has a place for it, and what is planned. On this route two kinds need mapping.

Records in USB drives and their place in Lawmatics
RecordIn USB drivesIn LawmaticsWhat is planned
DocumentsFiles stored in or linked from the systemHeldLoose files and folders; no sharing, versions or access control on FAT formats.Has a place in partFiles and folders on each matter, added by upload or API, not by the spreadsheet import.Carried with mapping
EmailsEmails saved to matters or to the storeHeld in partSaved message files or copied Outlook data files, where someone put them there.Has a place in partEmails reach a matter through mail sync from a connected mailbox.Carried with mapping

What the plans mean

Carried with mapping
Lawmatics holds this differently, or in part. Each field or value is matched to its place before loading, and you see the mapping first.

The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.

This kind of move

Mostly a contact list, cleaned before it lands.

Lawmatics is built for contacts, leads and the conversations around them. What USB drives can offer it first is a list of people and companies, and sometimes a history that can be attached as notes. Whether anything else it holds has a place depends on what Lawmatics keeps besides contacts, and the table above shows that kind by kind. What has no place stays where it is or is archived.

A contact list taken from a system that was never a CRM needs work before it is useful. Names are split or joined differently, the same client appears under several spellings, and there is no record of who agreed to be contacted. The list is cleaned and de-duplicated, matched against what Lawmatics already holds, and loaded with a source tag, so the firm can tell these contacts from the ones that came through intake.

With USB drives the files are already on equipment the firm controls, so there is no export step: they are read where they are. Upload speed sets the pace for a large store. The originals stay in place, unchanged, until the firm has checked the copy in Lawmatics.

Where the data is now

Each USB drive is its own small puzzle, and the first task is to say what it is. A working copy of matter files is handled one way. The backup of an old practice system is a database to be restored, not a set of documents. Material received from a client belongs to one matter and may need to be kept exactly as it was received.

  1. Identify each drive first

    Every drive is labelled and listed, and its contents are classed as loose documents, a system backup, or third-party material for a known matter. A stick holding a .bak or other backup file goes to whoever is handling that old system, because the documents inside cannot be reached by copying.

  2. Copy once, then put it away

    Flash drives can fail without warning, and each reading is a small risk. It is safer to copy a drive once and do the sorting and matching on the copy than to keep going back to the stick. How the copy is made and checked is agreed with the firm’s IT provider, and the drive goes back in the safe.

  3. Times shift on FAT drives

    FAT file systems store times in local time and record the modified time only to the nearest two seconds. The same document on a stick and on the server can show dates an hour apart after a daylight saving change. Matching dates is therefore an unreliable way to find duplicates on these drives.

  4. Encrypted drives need their password

    A drive protected with BitLocker To Go or a hardware keypad opens only with its password or recovery key. Where the person who set it has left, the firm’s IT provider may hold a recovery key. If nobody does, the contents cannot be read, and that is recorded against the drive.

  5. Material from clients and other parties

    Drives received in a matter are evidence of what was handed over. The original folder structure and file dates are preserved in the copy, and the files are filed to the matter as a set under the date received. What happens to the physical drive, kept or returned, follows the firm’s own file rules.

More about moving off USB drives

Where it is going

Lawmatics takes matters, contacts and companies from CSV files, and its API accepts notes, tasks, appointments, files, time entries and invoices. It is an intake and client relationship system, so a firm arriving from full practice management has to decide what it is for. People and matters load well. There is no general ledger, and years of billing history have no natural home.

  1. Contacts and matters load separately

    The import expects two spreadsheets: one for contacts or companies with no case, such as referrers and other lawyers, and one for matters. A matter import creates the matter and its primary contact together. Every matter has exactly one primary contact, so joint clients are loaded as one primary and one relationship.

  2. Set up before loading

    Owner, stage, practice area, source and campaign are matched by name. A value on the spreadsheet that does not match one in Lawmatics exactly creates a new one, which is how a firm ends up with two spellings of the same practice area. Users, pipelines, practice areas and marketing sources are set up first, and custom fields must exist before data is loaded into them.

  3. Statuses and matter numbers

    Each imported matter must be PNC (potential new client), Hired or Lost, with open and closed handled as sub-statuses the firm creates. The case number is a system field assigned by an auto-numbering pattern and cannot be edited by hand afterwards. Whether old matter numbers can be loaded into it, or belong in a custom field, is tested in the trial load.

  4. Duplicates are matched by email

    With Match Contacts by Email switched on, a contact whose email already exists is skipped or updated, never doubled. Names and phone numbers are not checked. Matters are not deduplicated at all, so two rows with one email create two matters on one contact. Clean-up therefore happens in the spreadsheet, and automations are switched off for every load.

  5. What has no place

    There is no general ledger. The Time & Billing module holds time entries, expenses, invoices and a trust account with a running balance per matter, and past invoices are entered as already sent and then marked paid. A firm that needs its full accounting history keeps the old system read only or carries the books in an accounting package.

More about moving into Lawmatics

How NewLaw runs it

Four steps, in this order.

Nothing financial lands in Lawmatics on this route, which makes it repeatable: a load can be run again until it is right.

  1. Analysis

    We read what USB drives hold and how it is organised, then agree with you where each kind of record will sit in Lawmatics. Anything with no place there stays behind or is archived, and you see which before the move.

  2. Clean-up

    Duplicate clients, matters and folders are merged where they can be identified, and naming is put into one format, before anything is copied. It is not always possible to find every one, so some may carry across.

  3. Trial load

    A trial is loaded into Lawmatics and checked against USB drives: record and file counts, the links between records, document dates, and a sample opened by your own people. Exceptions are listed for you to decide.

  4. Cutover

    There is no financial cutover on this route. After a short freeze on changes in USB drives, a final pass over a weekend picks up what changed since the trial. USB drives are kept read only as the fall-back record.

Fixed price, agreed after the analysis. How NewLaw moves legal data

Start

Start this migration

Tell us what is in USB drives and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.

Step 1 of 5

Step 1 of 5: Start with the route

Moving fromUSB drives
Moving toLawmatics

The route comes from this page. Four short steps follow. Nothing you send commits your firm to anything.

What happens after you send it

  1. A free first call

    We go through your answers with you and ask about anything they leave open.

  2. An analysis of what USB drives holds

    What is in it, how its records link, and where each piece would sit in Lawmatics. Anything with no place there comes across as a note or stays behind, and you see which before the move.

  3. A fixed price in writing

    Set after the analysis, so it reflects what is in your data. You have it before any work starts.

Beyond the data

Setting up Lawmatics

Loaded data is not yet a working system. This is what NewLaw sets up in Lawmatics, beyond the migration, so that people can work in it from the first day.

In Lawmatics the design comes before the data. The pipeline stages, practice areas, custom fields and relationship types decide what the import can hold, and the forms and automations decide what the firm’s intake looks like from the first day. If a practice system sits behind it, the field mapping between the two is part of the same job.

Set-up decisions in Lawmatics

  • Pipelines and stages for intake and for open matters
  • Practice areas, sub-statuses, relationship types and the matter numbering pattern
  • Custom fields on matters, contacts and companies
  • Intake forms, booking links and e-signature document templates
  • Follow-up automations, with marketing sources and campaigns
  • Mail and calendar sync, user roles and practice system integration

Questions

USB drives to Lawmatics: what firms ask

We have a box of old USB drives and no idea what is on them. Is it worth including them?

Usually it is worth the listing, which is quick. Each drive is summarised: how many files, what kinds, what date range, which client names appear. The firm then chooses which drives are loaded, which are kept as they are, and which hold nothing but copies of files already on the server.

One drive has a backup from the system we used ten years ago. Can that be brought in?

Possibly. It depends on whether the backup can be restored, which needs a copy of the old software or a database engine that reads its format. That is tested on its own before any promise is made. If it restores, its matters and documents are treated like any other source system.

Is it safe to plug unknown drives into our network?

That is a question for the firm’s IT provider, and the cautious answer is no. A drive of unknown origin can carry malicious software as well as documents. How unknown drives are read, and on which machine, is agreed with the IT provider before any of them is opened.

Do documents from USB drives keep their folders and dates in Lawmatics?

In part. Files and folders on each matter, added by upload or API, not by the spreadsheet import. The structure in USB drives is mapped to what Lawmatics offers and you see the mapping before the load. File dates are carried.

Does everything in USB drives have a place in Lawmatics?

On paper, yes: each kind of record USB drives hold has a place in Lawmatics. Whether every field fits is a separate question, and the analysis answers it field by field. Anything with no place comes across as a note or stays behind, and you see which before the move.

What has to be decided before USB drives data is loaded into Lawmatics?

Documents and emails are carried with mapping, so each mapping is agreed with you first. The firm also decides which closed matters and how many versions of a document are in scope.

Where to start

Before and after the move.

Choosing the system comes before a migration. Setting it up and putting AI to work come after.

How we do itDiscovery to rollout, step by step

USB drives and Lawmatics are the names and marks of their owners, used here only to identify the two systems.

Moving from USB drives to Lawmatics?

Tell us what you are moving. You get a plan and a fixed price after the analysis.

We reply within one business day.