Skip to content
NEWLAW.COM
+61 1300 495 281
Let’s talk

Data migration route

Amazon S3 to Lawmatics migration

Amazon S3 is cloud file storage, and Lawmatics is a cloud CRM and intake system. Lawmatics is built around people and enquiries, so the contact list leads this move, and the table shows what else has a place.

FromAmazon S3Cloud
  1. Documents: Carried with mapping
  2. Emails: Carried with mapping
  3. Custom fields: Carried with mapping
ToLawmaticsCloud
  • 3 mapped
What the two products hold. The analysis confirms it field by field.

What moves

What moves from Amazon S3 to Lawmatics

Each row is a kind of record Amazon S3 holds, whether Lawmatics has a place for it, and what is planned. On this route three kinds need mapping.

Records in Amazon S3 and their place in Lawmatics
RecordIn Amazon S3In LawmaticsWhat is planned
DocumentsFiles stored in or linked from the systemHeldObjects in buckets; a folder is only the part of the key before a slash.Has a place in partFiles and folders on each matter, added by upload or API, not by the spreadsheet import.Carried with mapping
EmailsEmails saved to matters or to the storeHeld in partOnly where messages were saved to the bucket as files such as .msg or .eml.Has a place in partEmails reach a matter through mail sync from a connected mailbox.Carried with mapping
Custom fieldsFields and record types the firm added itselfHeld in partObjects can carry user-defined metadata and tags as name and value pairs.Has a placeMatter, contact and company fields. A field must exist before data is imported into it.Carried with mapping

What the plans mean

Carried with mapping
Lawmatics holds this differently, or in part. Each field or value is matched to its place before loading, and you see the mapping first.

The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.

This kind of move

Mostly a contact list, cleaned before it lands.

Lawmatics is built for contacts, leads and the conversations around them. What Amazon S3 can offer it first is a list of people and companies, and sometimes a history that can be attached as notes. Whether anything else it holds has a place depends on what Lawmatics keeps besides contacts, and the table above shows that kind by kind. What has no place stays where it is or is archived.

A contact list taken from a system that was never a CRM needs work before it is useful. Names are split or joined differently, the same client appears under several spellings, and there is no record of who agreed to be contacted. The list is cleaned and de-duplicated, matched against what Lawmatics already holds, and loaded with a source tag, so the firm can tell these contacts from the ones that came through intake.

Both are hosted by their makers, so nothing is collected from the firm’s office. What can be taken out of Amazon S3 depends on its export tools and on what its maker provides on request, and that is confirmed during the analysis, before a date is set. The subscription to Amazon S3 is kept running until the checks on Lawmatics are finished.

Where the data is now

Moving a firm’s files out of S3 starts with finding out who put them there and how they are named. A bucket filled by a person usually mirrors a client and matter folder tree. One filled by an application may hold nothing but numbered objects, with the real file names kept in that application’s database. Those are different jobs, and the analysis says which one this is.

  1. Folders are part of the name

    S3 has no folders. A key such as Clients/Nguyen/2019-0412/Letter.pdf is one long name, and the console draws folders from the slashes. Keys can run to 1,024 bytes, far longer than Windows or SharePoint accept, and may contain characters they reject. Those keys are listed in the analysis and shortened by an agreed rule.

  2. Modified dates are upload dates

    The date S3 records against an object is the date it was written to the bucket. A letter drafted in 2014 and uploaded in 2021 shows as 2021. Unless the original date was kept in object metadata or in an index, it cannot be recovered from S3, and document dates in the new system will reflect that.

  3. Archive classes need a restore

    Objects in the S3 Glacier Flexible Retrieval and Deep Archive storage classes cannot be read straight away. Each has to be restored to a temporary copy first, which takes time and is charged by AWS. Closed-matter archives are often stored this way, so the restore is requested before the trial load, not during it.

  4. Versions exist only if enabled

    Versioning is off unless someone switched it on for the bucket. Where it is on, every overwrite keeps the earlier object in full, and a deleted file sits behind a delete marker and is not removed. The firm decides whether earlier versions and deleted objects move, because a plain copy of the bucket brings only the current ones.

  5. Application buckets need the database

    Where a practice or document system used the bucket as its store, the keys are often identifiers and not file names. The matter, the document title and the author live in that system’s database. Copying the bucket alone produces thousands of unnamed files, so the objects are matched to their records before anything is loaded.

More about moving off Amazon S3

Where it is going

Lawmatics takes matters, contacts and companies from CSV files, and its API accepts notes, tasks, appointments, files, time entries and invoices. It is an intake and client relationship system, so a firm arriving from full practice management has to decide what it is for. People and matters load well. There is no general ledger, and years of billing history have no natural home.

  1. Contacts and matters load separately

    The import expects two spreadsheets: one for contacts or companies with no case, such as referrers and other lawyers, and one for matters. A matter import creates the matter and its primary contact together. Every matter has exactly one primary contact, so joint clients are loaded as one primary and one relationship.

  2. Set up before loading

    Owner, stage, practice area, source and campaign are matched by name. A value on the spreadsheet that does not match one in Lawmatics exactly creates a new one, which is how a firm ends up with two spellings of the same practice area. Users, pipelines, practice areas and marketing sources are set up first, and custom fields must exist before data is loaded into them.

  3. Statuses and matter numbers

    Each imported matter must be PNC (potential new client), Hired or Lost, with open and closed handled as sub-statuses the firm creates. The case number is a system field assigned by an auto-numbering pattern and cannot be edited by hand afterwards. Whether old matter numbers can be loaded into it, or belong in a custom field, is tested in the trial load.

  4. Duplicates are matched by email

    With Match Contacts by Email switched on, a contact whose email already exists is skipped or updated, never doubled. Names and phone numbers are not checked. Matters are not deduplicated at all, so two rows with one email create two matters on one contact. Clean-up therefore happens in the spreadsheet, and automations are switched off for every load.

  5. What has no place

    There is no general ledger. The Time & Billing module holds time entries, expenses, invoices and a trust account with a running balance per matter, and past invoices are entered as already sent and then marked paid. A firm that needs its full accounting history keeps the old system read only or carries the books in an accounting package.

More about moving into Lawmatics

How NewLaw runs it

Four steps, in this order.

Nothing financial lands in Lawmatics on this route, which makes it repeatable: a load can be run again until it is right.

  1. Analysis

    We read what Amazon S3 holds and how it is organised, then agree with you where each kind of record will sit in Lawmatics. Anything with no place there stays behind or is archived, and you see which before the move.

  2. Clean-up

    Duplicate clients, matters and folders are merged where they can be identified, and naming is put into one format, before anything is copied. It is not always possible to find every one, so some may carry across.

  3. Trial load

    A trial is loaded into Lawmatics and checked against Amazon S3: record and file counts, the links between records, document dates, and a sample opened by your own people. Exceptions are listed for you to decide.

  4. Cutover

    There is no financial cutover on this route. After a short freeze on changes in Amazon S3, a final pass over a weekend picks up what changed since the trial. Amazon S3 is kept read only as the fall-back record.

Fixed price, agreed after the analysis. How NewLaw moves legal data

Start

Start this migration

Tell us what is in Amazon S3 and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.

Step 1 of 5

Step 1 of 5: Start with the route

Moving fromAmazon S3
Moving toLawmatics

The route comes from this page. Four short steps follow. Nothing you send commits your firm to anything.

What happens after you send it

  1. A free first call

    We go through your answers with you and ask about anything they leave open.

  2. An analysis of what Amazon S3 holds

    What is in it, how its records link, and where each piece would sit in Lawmatics. Anything with no place there comes across as a note or stays behind, and you see which before the move.

  3. A fixed price in writing

    Set after the analysis, so it reflects what is in your data. You have it before any work starts.

Beyond the data

Setting up Lawmatics

Loaded data is not yet a working system. This is what NewLaw sets up in Lawmatics, beyond the migration, so that people can work in it from the first day.

In Lawmatics the design comes before the data. The pipeline stages, practice areas, custom fields and relationship types decide what the import can hold, and the forms and automations decide what the firm’s intake looks like from the first day. If a practice system sits behind it, the field mapping between the two is part of the same job.

Set-up decisions in Lawmatics

  • Pipelines and stages for intake and for open matters
  • Practice areas, sub-statuses, relationship types and the matter numbering pattern
  • Custom fields on matters, contacts and companies
  • Intake forms, booking links and e-signature document templates
  • Follow-up automations, with marketing sources and campaigns
  • Mail and calendar sync, user roles and practice system integration

Questions

Amazon S3 to Lawmatics: what firms ask

Our IT provider set the bucket up. What do you need from them?

Access to read the bucket, arranged in whatever way the firm and its provider decide, and the region it sits in. They are also asked whether versioning is on, whether any objects are in an archive storage class, and whether a person or an application wrote the files. Moving the files out means reading them, so write access is not part of the request.

Will our client and matter folders look the same in the new system?

In outline, if the keys follow a client and matter pattern. Each part of the key between slashes becomes a folder, or is read as the client, the matter number and the document name where the destination files by matter. Keys that fit no pattern are listed for the firm to place by hand or leave in an unsorted folder.

Can the bucket stay as our archive after the move?

It can. A firm may move its active matters into the new system and leave closed files where they are. What matters then is that someone at the firm, not only the IT provider, holds the AWS account details and knows how to find one closed file by client name. That is worth writing down before the project ends.

Do documents from Amazon S3 keep their folders and dates in Lawmatics?

In part. Files and folders on each matter, added by upload or API, not by the spreadsheet import. The structure in Amazon S3 is mapped to what Lawmatics offers and you see the mapping before the load. File dates are carried.

Does everything in Amazon S3 have a place in Lawmatics?

On paper, yes: each kind of record Amazon S3 holds has a place in Lawmatics. Whether every field fits is a separate question, and the analysis answers it field by field. Anything with no place comes across as a note or stays behind, and you see which before the move.

What has to be decided before Amazon S3 data is loaded into Lawmatics?

Documents, emails and custom fields are carried with mapping, so each mapping is agreed with you first. The firm also decides which closed matters and how many versions of a document are in scope.

Where to start

Before and after the move.

Choosing the system comes before a migration. Setting it up and putting AI to work come after.

How we do itDiscovery to rollout, step by step

Amazon S3 and Lawmatics are the names and marks of their owners, used here only to identify the two systems.

Moving from Amazon S3 to Lawmatics?

Tell us what you are moving. You get a plan and a fixed price after the analysis.

We reply within one business day.