Data migration route
Box to Lawmatics migration
Box is cloud file storage, and Lawmatics is a cloud CRM and intake system. Lawmatics is built around people and enquiries, so the contact list leads this move, and the table shows what else has a place.
BoxCloud- Notes: Carried across
- Tasks: Carried across
- Documents: Carried with mapping
- Emails: Carried with mapping
- Custom fields: Carried with mapping
- Templates: Carried with mapping
LawmaticsCloud- 2 carried
- 4 mapped
What moves
What moves from Box to Lawmatics
Each row is a kind of record Box holds, whether Lawmatics has a place for it, and what is planned. On this route two kinds of record carry across and four kinds need mapping.
| Record | What is planned | ||
|---|---|---|---|
| DocumentsFiles stored in or linked from the system | HeldFiles in folders, with version history, comments and optional metadata. | Has a place in partFiles and folders on each matter, added by upload or API, not by the spreadsheet import. | Carried with mapping |
| EmailsEmails saved to matters or to the store | Held in partOnly as message files saved or emailed into a folder. | Has a place in partEmails reach a matter through mail sync from a connected mailbox. | Carried with mapping |
| NotesFile notes, matter notes and contact notes | Held in partBox Notes are documents written inside Box, not notes recorded against a matter. | Has a placeNotes on matters, contacts and companies. | Carried across |
| TasksTo-dos and workflow steps assigned to people | Held in partTasks can be assigned on a file; they are not matter tasks. | Has a place | Carried across |
| Custom fieldsFields and record types the firm added itself | Held in partMetadata templates add fields to files and folders. | Has a placeMatter, contact and company fields. A field must exist before data is imported into it. | Carried with mapping |
| TemplatesPrecedents, document templates and automation | Held in partPrecedents are kept as ordinary files; Box Notes has its own note templates. | Has a place in partDocument and email templates are rebuilt with Lawmatics merge fields. | Carried with mapping |
What the plans mean
- Carried across
- Lawmatics has a place for this kind of record. It is loaded there and checked against Box.
- Carried with mapping
- Lawmatics holds this differently, or in part. Each field or value is matched to its place before loading, and you see the mapping first.
The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.
This kind of move
Mostly a contact list, cleaned before it lands.
Lawmatics is built for contacts, leads and the conversations around them. What Box can offer it first is a list of people and companies, and sometimes a history that can be attached as notes. Whether anything else it holds has a place depends on what Lawmatics keeps besides contacts, and the table above shows that kind by kind. What has no place stays where it is or is archived.
A contact list taken from a system that was never a CRM needs work before it is useful. Names are split or joined differently, the same client appears under several spellings, and there is no record of who agreed to be contacted. The list is cleaned and de-duplicated, matched against what Lawmatics already holds, and loaded with a source tag, so the firm can tell these contacts from the ones that came through intake.
Both are hosted by their makers, so nothing is collected from the firm’s office. What can be taken out of Box depends on its export tools and on what its maker provides on request, and that is confirmed during the analysis, before a date is set. The subscription to Box is kept running until the checks on Lawmatics are finished.
Where the data is now
Leaving Box
Leaving Box is mostly a question of ownership and of what is attached to files but not inside them. Folders belong to whoever created them unless the firm set Box up with administrator-owned folders. Comments, tasks, metadata values and earlier versions live in Box beside each file. A plain download brings the current files and none of the rest.
Every top-level folder has an owner
Box lets either administrators or ordinary users own top-level folders, depending on how the account was set up. Where users own them, matter files are spread across personal accounts, including those of people who have left. The inventory is taken from the administrator’s side so that nobody’s folders are missed.
Each person sees a different tree
A collaborator invited part-way down sees that folder as their own top level. Two lawyers describing the same matter folder may give different paths to it. The structure that moves is the owner’s full tree, and staff are shown where their familiar folders sit within it before go-live.
Box Notes are not Word files
Notes written in Box Notes exist only inside Box. They are not files in the usual sense and do not open in Word. Firms that kept file notes or meeting minutes this way need them converted to a document format before the move, and the conversion is checked on a sample in the trial load.
Shared links point at Box
Clients and other parties may hold links to matter folders or single documents. Those links point at Box and cannot be relied on once the account is closed. A report of links and outside collaborators shows which matters have live external access, so the firm can tell those people where documents will be from cutover.
Versions depend on the plan
How many earlier versions of a file Box keeps is set by the plan and can be reduced by an administrator. What is not there cannot be moved. Where versions do exist, the destination may take them as true versions or only as separately named copies, which is settled in the analysis.
Where it is going
Arriving in Lawmatics
Lawmatics takes matters, contacts and companies from CSV files, and its API accepts notes, tasks, appointments, files, time entries and invoices. It is an intake and client relationship system, so a firm arriving from full practice management has to decide what it is for. People and matters load well. There is no general ledger, and years of billing history have no natural home.
Contacts and matters load separately
The import expects two spreadsheets: one for contacts or companies with no case, such as referrers and other lawyers, and one for matters. A matter import creates the matter and its primary contact together. Every matter has exactly one primary contact, so joint clients are loaded as one primary and one relationship.
Set up before loading
Owner, stage, practice area, source and campaign are matched by name. A value on the spreadsheet that does not match one in Lawmatics exactly creates a new one, which is how a firm ends up with two spellings of the same practice area. Users, pipelines, practice areas and marketing sources are set up first, and custom fields must exist before data is loaded into them.
Statuses and matter numbers
Each imported matter must be PNC (potential new client), Hired or Lost, with open and closed handled as sub-statuses the firm creates. The case number is a system field assigned by an auto-numbering pattern and cannot be edited by hand afterwards. Whether old matter numbers can be loaded into it, or belong in a custom field, is tested in the trial load.
Duplicates are matched by email
With Match Contacts by Email switched on, a contact whose email already exists is skipped or updated, never doubled. Names and phone numbers are not checked. Matters are not deduplicated at all, so two rows with one email create two matters on one contact. Clean-up therefore happens in the spreadsheet, and automations are switched off for every load.
What has no place
There is no general ledger. The Time & Billing module holds time entries, expenses, invoices and a trust account with a running balance per matter, and past invoices are entered as already sent and then marked paid. A firm that needs its full accounting history keeps the old system read only or carries the books in an accounting package.
How NewLaw runs it
Four steps, in this order.
Nothing financial lands in Lawmatics on this route, which makes it repeatable: a load can be run again until it is right.
Analysis
We read what Box holds and how it is organised, then agree with you where each kind of record will sit in Lawmatics. Anything with no place there stays behind or is archived, and you see which before the move.
Clean-up
Duplicate clients, matters and folders are merged where they can be identified, and naming is put into one format, before anything is copied. It is not always possible to find every one, so some may carry across.
Trial load
A trial is loaded into Lawmatics and checked against Box: record and file counts, the links between records, document dates, and a sample opened by your own people. Exceptions are listed for you to decide.
Cutover
There is no financial cutover on this route. After a short freeze on changes in Box, a final pass over a weekend picks up what changed since the trial. Box is kept read only as the fall-back record.
Fixed price, agreed after the analysis. How NewLaw moves legal data
Start
Start this migration
Tell us what is in Box and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.
Step 1 of 5
What happens after you send it
- A free first call
We go through your answers with you and ask about anything they leave open.
- An analysis of what Box holds
What is in it, how its records link, and where each piece would sit in Lawmatics. Anything with no place there comes across as a note or stays behind, and you see which before the move.
- A fixed price in writing
Set after the analysis, so it reflects what is in your data. You have it before any work starts.
Beyond the data
Setting up Lawmatics
Loaded data is not yet a working system. This is what NewLaw sets up in Lawmatics, beyond the migration, so that people can work in it from the first day.
In Lawmatics the design comes before the data. The pipeline stages, practice areas, custom fields and relationship types decide what the import can hold, and the forms and automations decide what the firm’s intake looks like from the first day. If a practice system sits behind it, the field mapping between the two is part of the same job.
Set-up decisions in Lawmatics
- Pipelines and stages for intake and for open matters
- Practice areas, sub-statuses, relationship types and the matter numbering pattern
- Custom fields on matters, contacts and companies
- Intake forms, booking links and e-signature document templates
- Follow-up automations, with marketing sources and campaigns
- Mail and calendar sync, user roles and practice system integration
Questions
Box to Lawmatics: what firms ask
Do our document versions come across from Box?
Only versions Box still holds can be moved, and that number depends on the plan. How they arrive depends on the destination: a document management system usually has version slots, a plain drive does not. The trial load can show one sample matter both ways if the firm is undecided.
What happens to folders we shared with clients?
The collaborators and shared links belong to Box and do not transfer. Before cutover the firm gets a list of every folder with outside access. If the new system has a client portal or its own sharing, access is set up there, and clients are told where to find their documents from then on.
Can we move only open matters and leave the rest in Box?
Yes, if the folder names or metadata show which matters are open. Where they do not, the open matter list from the practice management system is matched to folders by client and matter number. Closed folders can stay in Box read only for as long as the firm keeps the subscription.
Do documents from Box keep their folders and dates in Lawmatics?
In part. Files and folders on each matter, added by upload or API, not by the spreadsheet import. The structure in Box is mapped to what Lawmatics offers and you see the mapping before the load. File dates are carried.
Does everything in Box have a place in Lawmatics?
On paper, yes: each kind of record Box holds has a place in Lawmatics. Whether every field fits is a separate question, and the analysis answers it field by field. Anything with no place comes across as a note or stays behind, and you see which before the move.
What has to be decided before Box data is loaded into Lawmatics?
Documents, emails, custom fields and templates are carried with mapping, so each mapping is agreed with you first. The firm also decides which closed matters and how many versions of a document are in scope.
Other routes
Other routes from Box and into Lawmatics
Where to start
Before and after the move.
Choosing the system comes before a migration. Setting it up and putting AI to work come after.
Choose your systems
Technology stack selection
Decide which practice management system your firm runs, with the evidence and the cost beside it.
About four weeks for a firm of about 15 people. Fixed price, set after a free first call.
Move your data
Data migration
Your data is cleaned up before anything moves, then a trial load is checked against the old system.
Fixed price, agreed after the analysis.
Set up your new system
Implementation
Your new system set up around the way your firm works: configuration, document automation and training.
A small firm of 1 to 10 users typically takes 4 to 8 weeks. A mid-sized firm of 10 to 50 users takes 8 to 16 weeks.
Put AI to work
AI advisory and enablement
A small group of your people learn to use an approved AI tool on real work, under written rules.
Two to four weeks for a small first group. Fixed price, set after a free first call.
Box and Lawmatics are the names and marks of their owners, used here only to identify the two systems.
Moving from Box to Lawmatics?
Tell us what you are moving. You get a plan and a fixed price after the analysis.
We reply within one business day.