Data migration route
Egnyte to Litify migration
Egnyte is cloud file storage, and Litify is a cloud case management system. The move is matching each file in Egnyte to its case in Litify.
EgnyteCloud- Documents: Carried across
- Emails: Carried with mapping
- Custom fields: Carried with mapping
- Notes: Confirmed in the analysis
- Tasks: Confirmed in the analysis
LitifyCloud- 1 carried
- 2 mapped
- 2 to confirm
What moves
What moves from Egnyte to Litify
Each row is a kind of record Egnyte holds, whether Litify has a place for it, and what is planned. On this route one kind of record carries across, two kinds need mapping and two kinds are confirmed in the analysis.
| Record | What is planned | ||
|---|---|---|---|
| DocumentsFiles stored in or linked from the system | HeldFiles in the Shared folder tree and in users’ Private folders, with versions. | Has a placeLoaded to the document component and attached to matters. | Carried across |
| EmailsEmails saved to matters or to the store | Held in partOnly where staff saved message files into folders. | Has a place in partShown on the activity timeline. How old email is loaded is confirmed in the analysis. | Carried with mapping |
| NotesFile notes, matter notes and contact notes | To be confirmed | To be confirmed | Confirmed in the analysis |
| TasksTo-dos and workflow steps assigned to people | To be confirmed | Has a place | Confirmed in the analysis |
| Custom fieldsFields and record types the firm added itself | Held in partMetadata sections and properties, where an administrator has defined them. | Has a placeCustom fields are created before loading. | Carried with mapping |
What the plans mean
- Carried across
- Litify has a place for this kind of record. It is loaded there and checked against Egnyte.
- Carried with mapping
- Litify holds this differently, or in part. Each field or value is matched to its place before loading, and you see the mapping first.
- Confirmed in the analysis
- We could not confirm this from the two products’ own material, so it is checked against your data before the plan is fixed.
The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.
This kind of move
Every document goes to the case it belongs to.
A case management system expects each document to sit on a case, usually in a category such as correspondence, medical records or court documents. Egnyte organises files its own way, by profile or by folder. So the move needs two rules: which case a file belongs to, and which category it goes in. The first comes from client and matter references or folder names. The second comes from a document type or a subfolder, and where neither exists the files arrive uncategorised and are marked as such.
Cases must exist in Litify before documents can be attached to them. If the system is already live, files are matched to its case list and the unmatched ones are reported. If it is new, the case list is created first. Dates, authors and file names are kept. Email comes across as message files. Where several versions of a document exist, the firm chooses between loading the latest and loading them all.
Both are hosted by their makers, so nothing is collected from the firm’s office. What can be taken out of Egnyte depends on its export tools and on what its maker provides on request, and that is confirmed during the analysis, before a date is set. The subscription to Egnyte is kept running until the checks on Litify are finished.
Where the data is now
Leaving Egnyte
An Egnyte domain is a folder tree, and moving it into a legal system is mostly a matter of teaching that tree which folder is which client and which matter. The files download with their paths and dates. What takes thought is everything the tree does not say: permissions on particular folders, private folders, links shared with clients, and any metadata the firm added.
Shared and Private are separate
Firm files live under the Shared folder. Administrators and power users may each also have a Private folder that colleagues do not see, and files created in draft mode are saved there. Client documents can end up in private folders. They are inventoried per user, and the owner decides what is matter material.
Permissions are per folder
Access is granted folder by folder to users and groups, and a subfolder can differ from its parent. A restricted matter is simply a folder most people are not on. The permissions are exported before extraction, so that restricted folders are known and their security can be reproduced in the destination.
Metadata may or may not exist
Egnyte lets administrators define metadata sections and have values inherit down a folder tree, but a domain can run without any. Where a firm did set client or matter properties on folders, those are a more reliable key than folder names. The analysis checks which the firm has and uses the stronger one.
Versions and Trash
Earlier versions of files are kept, and deleted items wait in Trash until they are purged. Both inflate the apparent volume. The firm chooses whether versions come across, and the counts are reported separately for current files, older versions and Trash.
Links shared outside the firm
Folders and files shared with clients by link, and upload links that clients use to send documents in, depend on the domain staying open. A list of active links and who holds them is produced before cutover, so the people who rely on them can be told where to go instead.
Where it is going
Arriving in Litify
Loading a firm into Litify is done inside a Salesforce environment that has been configured for that firm, normally by Litify or one of its implementation partners. The data work fits around that project. Old records are mapped to parties, roles, intakes and matters and loaded into the Salesforce objects behind them, and documents are loaded separately and attached.
The design comes first
Case types, stages and page layouts are decided during discovery, before any load. A load into a half-configured environment has to be repeated when a field changes. The data mapping is written against the agreed design and updated whenever the design moves, so the two stay in step.
One party, many roles
Contacts from the old system become parties, and each appearance on a matter becomes a role. Duplicate contacts turn into duplicate parties with their roles divided between them. Duplicates are merged before the load where they can be identified, since separating them afterwards means pointing every role at the right party again.
Open enquiries load as intakes
Leads and enquiries that have not signed belong in intakes, not matters. They are loaded with their source and status so that conversion reports start from a true position. Old declined enquiries are loaded only if the firm wants them for conflict checking, and are marked so they do not count as live.
Documents load after records
Files are loaded into the document component once the matters exist, because each one is attached to a matter record. Folder structure is set per case type beforehand. Large injury files with medical records and video take time to transfer, and that time is planned into the cutover weekend.
Validation rules reject bad rows
A configured environment enforces required fields and validation rules, and old data seldom satisfies all of them. Rows that fail are reported by the load. They are fixed in the source and run again, or the rule is relaxed for migrated records, and the firm decides which for each rule.
How NewLaw runs it
Four steps, in this order.
Nothing financial lands in Litify on this route, which makes it repeatable: a load can be run again until it is right. The maker of Litify says that it, or its partners, load firms into the product. Where the firm uses that service, NewLaw’s part is the work around it: the analysis, the clean-up in Egnyte and checking each trial against Egnyte.
Analysis
We read what Egnyte holds and how it is organised, then agree with you where each kind of record will sit in Litify. Anything with no place there stays behind or is archived, and you see which before the move.
Clean-up
Duplicate clients, matters and folders are merged where they can be identified, and naming is put into one format, before anything is copied. It is not always possible to find every one, so some may carry across.
Trial load
A trial is loaded into Litify and checked against Egnyte: record and file counts, the links between records, document dates, and a sample opened by your own people. Exceptions are listed for you to decide.
Cutover
There is no financial cutover on this route. After a short freeze on changes in Egnyte, a final pass over a weekend picks up what changed since the trial. Egnyte is kept read only as the fall-back record.
Fixed price, agreed after the analysis. How NewLaw moves legal data
Start
Start this migration
Tell us what is in Egnyte and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.
Step 1 of 5
What happens after you send it
- A free first call
We go through your answers with you and ask about anything they leave open.
- An analysis of what Egnyte holds
What is in it, how its records link, and where each piece would sit in Litify. Anything with no place there comes across as a note or stays behind, and you see which before the move.
- A fixed price in writing
Set after the analysis, so it reflects what is in your data. You have it before any work starts.
Beyond the data
Setting up Litify
Loaded data is not yet a working system. The maker of Litify runs or arranges the set-up of its product, so this is what has to be decided and put in place in Litify, whoever does the work, before people rely on it from the first day.
A Litify implementation is a configuration project on Salesforce, run by Litify or an implementation partner with the firm’s own project team. Discovery sessions with each department come first. The decisions that follow shape the system: what an intake asks, how a matter moves through its stages, who sees what, and which other systems are connected.
Set-up decisions in Litify
- Define intake questionnaires and the rules for conversion
- Set case types, matter stages and page layouts
- Build matter plans that create tasks at each stage
- Design document folders and generation templates per case type
- Configure user roles and sharing for restricted matters
- Decide on timekeeping, billing and accounting integrations
Questions
Egnyte to Litify: what firms ask
Our folders are already by client and matter. Is that enough?
It is a good start. The folder names are matched to the matter list from the practice management system, and whatever does not match is reported: misspelt names, closed matters with no number, general folders. Those are fixed in Egnyte before extraction or mapped by hand, and the trial load shows the result.
Do file dates and authors survive?
Modified dates travel with the files. Who uploaded or last edited a file is recorded by Egnyte, and where it can be exported as data it is loaded as author or kept as a property. Created dates are less reliable in any file store, and document dates are checked on the trial load.
Do documents from Egnyte keep their folders and dates in Litify?
Litify stores documents. Loaded to the document component and attached to matters. Each file is placed under the client and matter it came from, and created and modified dates are carried, so a document still shows when it was written. The trial load is checked by count and by opening a sample.
Does everything in Egnyte have a place in Litify?
Most of it does on paper. Notes and tasks could not be confirmed from the two products’ own material, so those are checked in the analysis. Anything that turns out to have no place in Litify is kept as a readable archive, and you see which before the move.
What has to be decided before Egnyte data is loaded into Litify?
Emails and custom fields are carried with mapping, so each mapping is agreed with you first. Notes and tasks are confirmed in the analysis. The firm also decides which closed matters and how many versions of a document are in scope.
Other routes
Other routes from Egnyte and into Litify
Where to start
Before and after the move.
Choosing the system comes before a migration. Setting it up and putting AI to work come after.
Choose your systems
Technology stack selection
Decide which practice management system your firm runs, with the evidence and the cost beside it.
About four weeks for a firm of about 15 people. Fixed price, set after a free first call.
Move your data
Data migration
Your data is cleaned up before anything moves, then a trial load is checked against the old system.
Fixed price, agreed after the analysis.
Set up your new system
Implementation
Your new system set up around the way your firm works: configuration, document automation and training.
A small firm of 1 to 10 users typically takes 4 to 8 weeks. A mid-sized firm of 10 to 50 users takes 8 to 16 weeks.
Put AI to work
AI advisory and enablement
A small group of your people learn to use an approved AI tool on real work, under written rules.
Two to four weeks for a small first group. Fixed price, set after a free first call.
Egnyte and Litify are the names and marks of their owners, used here only to identify the two systems.
Moving from Egnyte to Litify?
Tell us what you are moving. You get a plan and a fixed price after the analysis.
We reply within one business day.