Data migration route
Amazon S3 to Litify migration
Amazon S3 is cloud file storage, and Litify is a cloud case management system. The move is matching each file in Amazon S3 to its case in Litify.
Amazon S3Cloud- Documents: Carried across
- Emails: Carried with mapping
- Custom fields: Carried with mapping
LitifyCloud- 1 carried
- 2 mapped
What moves
What moves from Amazon S3 to Litify
Each row is a kind of record Amazon S3 holds, whether Litify has a place for it, and what is planned. On this route one kind of record carries across and two kinds need mapping.
| Record | What is planned | ||
|---|---|---|---|
| DocumentsFiles stored in or linked from the system | HeldObjects in buckets; a folder is only the part of the key before a slash. | Has a placeLoaded to the document component and attached to matters. | Carried across |
| EmailsEmails saved to matters or to the store | Held in partOnly where messages were saved to the bucket as files such as .msg or .eml. | Has a place in partShown on the activity timeline. How old email is loaded is confirmed in the analysis. | Carried with mapping |
| Custom fieldsFields and record types the firm added itself | Held in partObjects can carry user-defined metadata and tags as name and value pairs. | Has a placeCustom fields are created before loading. | Carried with mapping |
What the plans mean
- Carried across
- Litify has a place for this kind of record. It is loaded there and checked against Amazon S3.
- Carried with mapping
- Litify holds this differently, or in part. Each field or value is matched to its place before loading, and you see the mapping first.
The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.
This kind of move
Every document goes to the case it belongs to.
A case management system expects each document to sit on a case, usually in a category such as correspondence, medical records or court documents. Amazon S3 organises files its own way, by profile or by folder. So the move needs two rules: which case a file belongs to, and which category it goes in. The first comes from client and matter references or folder names. The second comes from a document type or a subfolder, and where neither exists the files arrive uncategorised and are marked as such.
Cases must exist in Litify before documents can be attached to them. If the system is already live, files are matched to its case list and the unmatched ones are reported. If it is new, the case list is created first. Dates, authors and file names are kept. Email comes across as message files. Where several versions of a document exist, the firm chooses between loading the latest and loading them all.
Both are hosted by their makers, so nothing is collected from the firm’s office. What can be taken out of Amazon S3 depends on its export tools and on what its maker provides on request, and that is confirmed during the analysis, before a date is set. The subscription to Amazon S3 is kept running until the checks on Litify are finished.
Where the data is now
Leaving Amazon S3
Moving a firm’s files out of S3 starts with finding out who put them there and how they are named. A bucket filled by a person usually mirrors a client and matter folder tree. One filled by an application may hold nothing but numbered objects, with the real file names kept in that application’s database. Those are different jobs, and the analysis says which one this is.
Folders are part of the name
S3 has no folders. A key such as Clients/Nguyen/2019-0412/Letter.pdf is one long name, and the console draws folders from the slashes. Keys can run to 1,024 bytes, far longer than Windows or SharePoint accept, and may contain characters they reject. Those keys are listed in the analysis and shortened by an agreed rule.
Modified dates are upload dates
The date S3 records against an object is the date it was written to the bucket. A letter drafted in 2014 and uploaded in 2021 shows as 2021. Unless the original date was kept in object metadata or in an index, it cannot be recovered from S3, and document dates in the new system will reflect that.
Archive classes need a restore
Objects in the S3 Glacier Flexible Retrieval and Deep Archive storage classes cannot be read straight away. Each has to be restored to a temporary copy first, which takes time and is charged by AWS. Closed-matter archives are often stored this way, so the restore is requested before the trial load, not during it.
Versions exist only if enabled
Versioning is off unless someone switched it on for the bucket. Where it is on, every overwrite keeps the earlier object in full, and a deleted file sits behind a delete marker and is not removed. The firm decides whether earlier versions and deleted objects move, because a plain copy of the bucket brings only the current ones.
Application buckets need the database
Where a practice or document system used the bucket as its store, the keys are often identifiers and not file names. The matter, the document title and the author live in that system’s database. Copying the bucket alone produces thousands of unnamed files, so the objects are matched to their records before anything is loaded.
Where it is going
Arriving in Litify
Loading a firm into Litify is done inside a Salesforce environment that has been configured for that firm, normally by Litify or one of its implementation partners. The data work fits around that project. Old records are mapped to parties, roles, intakes and matters and loaded into the Salesforce objects behind them, and documents are loaded separately and attached.
The design comes first
Case types, stages and page layouts are decided during discovery, before any load. A load into a half-configured environment has to be repeated when a field changes. The data mapping is written against the agreed design and updated whenever the design moves, so the two stay in step.
One party, many roles
Contacts from the old system become parties, and each appearance on a matter becomes a role. Duplicate contacts turn into duplicate parties with their roles divided between them. Duplicates are merged before the load where they can be identified, since separating them afterwards means pointing every role at the right party again.
Open enquiries load as intakes
Leads and enquiries that have not signed belong in intakes, not matters. They are loaded with their source and status so that conversion reports start from a true position. Old declined enquiries are loaded only if the firm wants them for conflict checking, and are marked so they do not count as live.
Documents load after records
Files are loaded into the document component once the matters exist, because each one is attached to a matter record. Folder structure is set per case type beforehand. Large injury files with medical records and video take time to transfer, and that time is planned into the cutover weekend.
Validation rules reject bad rows
A configured environment enforces required fields and validation rules, and old data seldom satisfies all of them. Rows that fail are reported by the load. They are fixed in the source and run again, or the rule is relaxed for migrated records, and the firm decides which for each rule.
How NewLaw runs it
Four steps, in this order.
Nothing financial lands in Litify on this route, which makes it repeatable: a load can be run again until it is right. The maker of Litify says that it, or its partners, load firms into the product. Where the firm uses that service, NewLaw’s part is the work around it: the analysis, the clean-up in Amazon S3 and checking each trial against Amazon S3.
Analysis
We read what Amazon S3 holds and how it is organised, then agree with you where each kind of record will sit in Litify. Anything with no place there stays behind or is archived, and you see which before the move.
Clean-up
Duplicate clients, matters and folders are merged where they can be identified, and naming is put into one format, before anything is copied. It is not always possible to find every one, so some may carry across.
Trial load
A trial is loaded into Litify and checked against Amazon S3: record and file counts, the links between records, document dates, and a sample opened by your own people. Exceptions are listed for you to decide.
Cutover
There is no financial cutover on this route. After a short freeze on changes in Amazon S3, a final pass over a weekend picks up what changed since the trial. Amazon S3 is kept read only as the fall-back record.
Fixed price, agreed after the analysis. How NewLaw moves legal data
Start
Start this migration
Tell us what is in Amazon S3 and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.
Step 1 of 5
What happens after you send it
- A free first call
We go through your answers with you and ask about anything they leave open.
- An analysis of what Amazon S3 holds
What is in it, how its records link, and where each piece would sit in Litify. Anything with no place there comes across as a note or stays behind, and you see which before the move.
- A fixed price in writing
Set after the analysis, so it reflects what is in your data. You have it before any work starts.
Beyond the data
Setting up Litify
Loaded data is not yet a working system. The maker of Litify runs or arranges the set-up of its product, so this is what has to be decided and put in place in Litify, whoever does the work, before people rely on it from the first day.
A Litify implementation is a configuration project on Salesforce, run by Litify or an implementation partner with the firm’s own project team. Discovery sessions with each department come first. The decisions that follow shape the system: what an intake asks, how a matter moves through its stages, who sees what, and which other systems are connected.
Set-up decisions in Litify
- Define intake questionnaires and the rules for conversion
- Set case types, matter stages and page layouts
- Build matter plans that create tasks at each stage
- Design document folders and generation templates per case type
- Configure user roles and sharing for restricted matters
- Decide on timekeeping, billing and accounting integrations
Questions
Amazon S3 to Litify: what firms ask
Our IT provider set the bucket up. What do you need from them?
Access to read the bucket, arranged in whatever way the firm and its provider decide, and the region it sits in. They are also asked whether versioning is on, whether any objects are in an archive storage class, and whether a person or an application wrote the files. Moving the files out means reading them, so write access is not part of the request.
Will our client and matter folders look the same in the new system?
In outline, if the keys follow a client and matter pattern. Each part of the key between slashes becomes a folder, or is read as the client, the matter number and the document name where the destination files by matter. Keys that fit no pattern are listed for the firm to place by hand or leave in an unsorted folder.
Can the bucket stay as our archive after the move?
It can. A firm may move its active matters into the new system and leave closed files where they are. What matters then is that someone at the firm, not only the IT provider, holds the AWS account details and knows how to find one closed file by client name. That is worth writing down before the project ends.
Do documents from Amazon S3 keep their folders and dates in Litify?
Litify stores documents. Loaded to the document component and attached to matters. Each file is placed under the client and matter it came from, and created and modified dates are carried, so a document still shows when it was written. The trial load is checked by count and by opening a sample.
Does everything in Amazon S3 have a place in Litify?
On paper, yes: each kind of record Amazon S3 holds has a place in Litify. Whether every field fits is a separate question, and the analysis answers it field by field. Anything with no place comes across as a note or stays behind, and you see which before the move.
What has to be decided before Amazon S3 data is loaded into Litify?
Emails and custom fields are carried with mapping, so each mapping is agreed with you first. The firm also decides which closed matters and how many versions of a document are in scope.
Other routes
Other routes from Amazon S3 and into Litify
Where to start
Before and after the move.
Choosing the system comes before a migration. Setting it up and putting AI to work come after.
Choose your systems
Technology stack selection
Decide which practice management system your firm runs, with the evidence and the cost beside it.
About four weeks for a firm of about 15 people. Fixed price, set after a free first call.
Move your data
Data migration
Your data is cleaned up before anything moves, then a trial load is checked against the old system.
Fixed price, agreed after the analysis.
Set up your new system
Implementation
Your new system set up around the way your firm works: configuration, document automation and training.
A small firm of 1 to 10 users typically takes 4 to 8 weeks. A mid-sized firm of 10 to 50 users takes 8 to 16 weeks.
Put AI to work
AI advisory and enablement
A small group of your people learn to use an approved AI tool on real work, under written rules.
Two to four weeks for a small first group. Fixed price, set after a free first call.
Amazon S3 and Litify are the names and marks of their owners, used here only to identify the two systems.
Moving from Amazon S3 to Litify?
Tell us what you are moving. You get a plan and a fixed price after the analysis.
We reply within one business day.