Data migration route
Egnyte to Filevine migration
Egnyte is cloud file storage, and Filevine is a cloud case management system. The move is matching each file in Egnyte to its case in Filevine.
EgnyteCloud- Documents: Carried across
- Emails: Carried across
- Custom fields: Carried with mapping
- Notes: Confirmed in the analysis
- Tasks: Confirmed in the analysis
FilevineCloud- 2 carried
- 1 mapped
- 2 to confirm
What moves
What moves from Egnyte to Filevine
Each row is a kind of record Egnyte holds, whether Filevine has a place for it, and what is planned. On this route two kinds of record carry across, one kind needs mapping and two kinds are confirmed in the analysis.
| Record | What is planned | ||
|---|---|---|---|
| DocumentsFiles stored in or linked from the system | HeldFiles in the Shared folder tree and in users’ Private folders, with versions. | Has a placeDocs section with folders. Templated project folders can be set per type. | Carried across |
| EmailsEmails saved to matters or to the store | Held in partOnly where staff saved message files into folders. | Has a placeHeld in the activity feed of the project. | Carried across |
| NotesFile notes, matter notes and contact notes | To be confirmed | Has a placeHeld as notes in the activity feed. | Confirmed in the analysis |
| TasksTo-dos and workflow steps assigned to people | To be confirmed | Has a place | Confirmed in the analysis |
| Custom fieldsFields and record types the firm added itself | Held in partMetadata sections and properties, where an administrator has defined them. | Has a placeCustom sections and fields per project type. | Carried with mapping |
What the plans mean
- Carried across
- Filevine has a place for this kind of record. It is loaded there and checked against Egnyte.
- Carried with mapping
- Filevine holds this differently, or in part. Each field or value is matched to its place before loading, and you see the mapping first.
- Confirmed in the analysis
- We could not confirm this from the two products’ own material, so it is checked against your data before the plan is fixed.
The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.
This kind of move
Every document goes to the case it belongs to.
A case management system expects each document to sit on a case, usually in a category such as correspondence, medical records or court documents. Egnyte organises files its own way, by profile or by folder. So the move needs two rules: which case a file belongs to, and which category it goes in. The first comes from client and matter references or folder names. The second comes from a document type or a subfolder, and where neither exists the files arrive uncategorised and are marked as such.
Cases must exist in Filevine before documents can be attached to them. If the system is already live, files are matched to its case list and the unmatched ones are reported. If it is new, the case list is created first. Dates, authors and file names are kept. Email comes across as message files. Where several versions of a document exist, the firm chooses between loading the latest and loading them all.
Both are hosted by their makers, so nothing is collected from the firm’s office. What can be taken out of Egnyte depends on its export tools and on what its maker provides on request, and that is confirmed during the analysis, before a date is set. The subscription to Egnyte is kept running until the checks on Filevine are finished.
Where the data is now
Leaving Egnyte
An Egnyte domain is a folder tree, and moving it into a legal system is mostly a matter of teaching that tree which folder is which client and which matter. The files download with their paths and dates. What takes thought is everything the tree does not say: permissions on particular folders, private folders, links shared with clients, and any metadata the firm added.
Shared and Private are separate
Firm files live under the Shared folder. Administrators and power users may each also have a Private folder that colleagues do not see, and files created in draft mode are saved there. Client documents can end up in private folders. They are inventoried per user, and the owner decides what is matter material.
Permissions are per folder
Access is granted folder by folder to users and groups, and a subfolder can differ from its parent. A restricted matter is simply a folder most people are not on. The permissions are exported before extraction, so that restricted folders are known and their security can be reproduced in the destination.
Metadata may or may not exist
Egnyte lets administrators define metadata sections and have values inherit down a folder tree, but a domain can run without any. Where a firm did set client or matter properties on folders, those are a more reliable key than folder names. The analysis checks which the firm has and uses the stronger one.
Versions and Trash
Earlier versions of files are kept, and deleted items wait in Trash until they are purged. Both inflate the apparent volume. The firm chooses whether versions come across, and the counts are reported separately for current files, older versions and Trash.
Links shared outside the firm
Folders and files shared with clients by link, and upload links that clients use to send documents in, depend on the domain staying open. A list of active links and who holds them is produced before cutover, so the people who rely on them can be told where to go instead.
Where it is going
Arriving in Filevine
Loading a firm into Filevine depends on the project types being built first. Until the sections and fields exist there is nowhere for the data to go, so configuration and migration are planned together. The old system’s parties, insurers, providers and key dates are mapped to sections, and its notes and emails are loaded into each project’s activity feed.
Project types before data
Each area of practice needs a project type with its sections, fields and phases defined in the Customs Editor. Changes made there apply to every project of that type. The types are drafted from the old system’s data, tested with a few real cases, and only then is the bulk load run.
One contact card per person
Contacts are held as contact cards. A doctor or adjuster who appears on many projects is best loaded as one card, not one for each project. Duplicates in the old system are merged before loading where they can be identified. Loading them as they are produces several cards for the same person, and staff then pick the wrong one when adding a party.
Lists become collection items
Anything the old system held as a list against a matter, such as providers, liens, insurance policies or expenses, is loaded as items in a collection section. Each column needs a matching field. Totals per project are compared with the old system afterwards, since those figures feed the settlement and disbursal sheets.
History goes into the feed
File notes, emails and completed tasks from the old system are loaded into the activity feed with their original dates and authors. Authors must exist as users or be recorded in the text. The feed is long on an old case, so staff are shown how to filter it before go-live.
Billing is a separate switch
The Billing section only appears once Billing is enabled for the firm. Time entries, invoices and trust balances from the old system need that in place before they can be loaded. A firm that leaves it off can still record case costs in a collection section built for the purpose.
How NewLaw runs it
Four steps, in this order.
Nothing financial lands in Filevine on this route, which makes it repeatable: a load can be run again until it is right.
Analysis
We read what Egnyte holds and how it is organised, then agree with you where each kind of record will sit in Filevine. Anything with no place there stays behind or is archived, and you see which before the move.
Clean-up
Duplicate clients, matters and folders are merged where they can be identified, and naming is put into one format, before anything is copied. It is not always possible to find every one, so some may carry across.
Trial load
A trial is loaded into Filevine and checked against Egnyte: record and file counts, the links between records, document dates, and a sample opened by your own people. Exceptions are listed for you to decide.
Cutover
There is no financial cutover on this route. After a short freeze on changes in Egnyte, a final pass over a weekend picks up what changed since the trial. Egnyte is kept read only as the fall-back record.
Fixed price, agreed after the analysis. How NewLaw moves legal data
Start
Start this migration
Tell us what is in Egnyte and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.
Step 1 of 5
What happens after you send it
- A free first call
We go through your answers with you and ask about anything they leave open.
- An analysis of what Egnyte holds
What is in it, how its records link, and where each piece would sit in Filevine. Anything with no place there comes across as a note or stays behind, and you see which before the move.
- A fixed price in writing
Set after the analysis, so it reflects what is in your data. You have it before any work starts.
Beyond the data
Setting up Filevine
Loaded data is not yet a working system. This is what NewLaw sets up in Filevine, beyond the migration, so that people can work in it from the first day.
Filevine arrives as a platform to be configured, and most of the implementation is design. Someone has to decide what a project looks like for each kind of work the firm does, what moves it from one phase to the next, and who can see what. Those decisions are made with the people who run the files, then built and tested.
Set-up decisions in Filevine
- Design project types, sections and fields for each practice area
- Define phases and the tasks each phase should trigger
- Build document templates that fill from project fields
- Set teams, permissions and protected sections for restricted matters
- Decide whether Billing and Payments are switched on
- Connect Lead Docket so signed leads become projects
Questions
Egnyte to Filevine: what firms ask
Our folders are already by client and matter. Is that enough?
It is a good start. The folder names are matched to the matter list from the practice management system, and whatever does not match is reported: misspelt names, closed matters with no number, general folders. Those are fixed in Egnyte before extraction or mapped by hand, and the trial load shows the result.
Do file dates and authors survive?
Modified dates travel with the files. Who uploaded or last edited a file is recorded by Egnyte, and where it can be exported as data it is loaded as author or kept as a property. Created dates are less reliable in any file store, and document dates are checked on the trial load.
Do documents from Egnyte keep their folders and dates in Filevine?
Filevine stores documents. Docs section with folders. Templated project folders can be set per type. Each file is placed under the client and matter it came from, and created and modified dates are carried, so a document still shows when it was written. The trial load is checked by count and by opening a sample.
Does everything in Egnyte have a place in Filevine?
Most of it does on paper. Notes and tasks could not be confirmed from the two products’ own material, so those are checked in the analysis. Anything that turns out to have no place in Filevine is kept as a readable archive, and you see which before the move.
What has to be decided before Egnyte data is loaded into Filevine?
Custom fields are carried with mapping, so each mapping is agreed with you first. Notes and tasks are confirmed in the analysis. The firm also decides which closed matters and how many versions of a document are in scope.
Other routes
Other routes from Egnyte and into Filevine
Where to start
Before and after the move.
Choosing the system comes before a migration. Setting it up and putting AI to work come after.
Choose your systems
Technology stack selection
Decide which practice management system your firm runs, with the evidence and the cost beside it.
About four weeks for a firm of about 15 people. Fixed price, set after a free first call.
Move your data
Data migration
Your data is cleaned up before anything moves, then a trial load is checked against the old system.
Fixed price, agreed after the analysis.
Set up your new system
Implementation
Your new system set up around the way your firm works: configuration, document automation and training.
A small firm of 1 to 10 users typically takes 4 to 8 weeks. A mid-sized firm of 10 to 50 users takes 8 to 16 weeks.
Put AI to work
AI advisory and enablement
A small group of your people learn to use an approved AI tool on real work, under written rules.
Two to four weeks for a small first group. Fixed price, set after a free first call.
Egnyte and Filevine are the names and marks of their owners, used here only to identify the two systems.
Moving from Egnyte to Filevine?
Tell us what you are moving. You get a plan and a fixed price after the analysis.
We reply within one business day.