Data migration route
Box to Filevine migration
Box is cloud file storage, and Filevine is a cloud case management system. The move is matching each file in Box to its case in Filevine.
BoxCloud- Documents: Carried across
- Emails: Carried across
- Notes: Carried across
- Tasks: Carried across
- Custom fields: Carried with mapping
- Templates: Carried with mapping
FilevineCloud- 4 carried
- 2 mapped
What moves
What moves from Box to Filevine
Each row is a kind of record Box holds, whether Filevine has a place for it, and what is planned. On this route four kinds of record carry across and two kinds need mapping.
| Record | What is planned | ||
|---|---|---|---|
| DocumentsFiles stored in or linked from the system | HeldFiles in folders, with version history, comments and optional metadata. | Has a placeDocs section with folders. Templated project folders can be set per type. | Carried across |
| EmailsEmails saved to matters or to the store | Held in partOnly as message files saved or emailed into a folder. | Has a placeHeld in the activity feed of the project. | Carried across |
| NotesFile notes, matter notes and contact notes | Held in partBox Notes are documents written inside Box, not notes recorded against a matter. | Has a placeHeld as notes in the activity feed. | Carried across |
| TasksTo-dos and workflow steps assigned to people | Held in partTasks can be assigned on a file; they are not matter tasks. | Has a place | Carried across |
| Custom fieldsFields and record types the firm added itself | Held in partMetadata templates add fields to files and folders. | Has a placeCustom sections and fields per project type. | Carried with mapping |
| TemplatesPrecedents, document templates and automation | Held in partPrecedents are kept as ordinary files; Box Notes has its own note templates. | Has a place in partTemplates are rebuilt as Filevine document templates. They are not converted. | Carried with mapping |
What the plans mean
- Carried across
- Filevine has a place for this kind of record. It is loaded there and checked against Box.
- Carried with mapping
- Filevine holds this differently, or in part. Each field or value is matched to its place before loading, and you see the mapping first.
The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.
This kind of move
Every document goes to the case it belongs to.
A case management system expects each document to sit on a case, usually in a category such as correspondence, medical records or court documents. Box organises files its own way, by profile or by folder. So the move needs two rules: which case a file belongs to, and which category it goes in. The first comes from client and matter references or folder names. The second comes from a document type or a subfolder, and where neither exists the files arrive uncategorised and are marked as such.
Cases must exist in Filevine before documents can be attached to them. If the system is already live, files are matched to its case list and the unmatched ones are reported. If it is new, the case list is created first. Dates, authors and file names are kept. Email comes across as message files. Where several versions of a document exist, the firm chooses between loading the latest and loading them all.
Both are hosted by their makers, so nothing is collected from the firm’s office. What can be taken out of Box depends on its export tools and on what its maker provides on request, and that is confirmed during the analysis, before a date is set. The subscription to Box is kept running until the checks on Filevine are finished.
Where the data is now
Leaving Box
Leaving Box is mostly a question of ownership and of what is attached to files but not inside them. Folders belong to whoever created them unless the firm set Box up with administrator-owned folders. Comments, tasks, metadata values and earlier versions live in Box beside each file. A plain download brings the current files and none of the rest.
Every top-level folder has an owner
Box lets either administrators or ordinary users own top-level folders, depending on how the account was set up. Where users own them, matter files are spread across personal accounts, including those of people who have left. The inventory is taken from the administrator’s side so that nobody’s folders are missed.
Each person sees a different tree
A collaborator invited part-way down sees that folder as their own top level. Two lawyers describing the same matter folder may give different paths to it. The structure that moves is the owner’s full tree, and staff are shown where their familiar folders sit within it before go-live.
Box Notes are not Word files
Notes written in Box Notes exist only inside Box. They are not files in the usual sense and do not open in Word. Firms that kept file notes or meeting minutes this way need them converted to a document format before the move, and the conversion is checked on a sample in the trial load.
Shared links point at Box
Clients and other parties may hold links to matter folders or single documents. Those links point at Box and cannot be relied on once the account is closed. A report of links and outside collaborators shows which matters have live external access, so the firm can tell those people where documents will be from cutover.
Versions depend on the plan
How many earlier versions of a file Box keeps is set by the plan and can be reduced by an administrator. What is not there cannot be moved. Where versions do exist, the destination may take them as true versions or only as separately named copies, which is settled in the analysis.
Where it is going
Arriving in Filevine
Loading a firm into Filevine depends on the project types being built first. Until the sections and fields exist there is nowhere for the data to go, so configuration and migration are planned together. The old system’s parties, insurers, providers and key dates are mapped to sections, and its notes and emails are loaded into each project’s activity feed.
Project types before data
Each area of practice needs a project type with its sections, fields and phases defined in the Customs Editor. Changes made there apply to every project of that type. The types are drafted from the old system’s data, tested with a few real cases, and only then is the bulk load run.
One contact card per person
Contacts are held as contact cards. A doctor or adjuster who appears on many projects is best loaded as one card, not one for each project. Duplicates in the old system are merged before loading where they can be identified. Loading them as they are produces several cards for the same person, and staff then pick the wrong one when adding a party.
Lists become collection items
Anything the old system held as a list against a matter, such as providers, liens, insurance policies or expenses, is loaded as items in a collection section. Each column needs a matching field. Totals per project are compared with the old system afterwards, since those figures feed the settlement and disbursal sheets.
History goes into the feed
File notes, emails and completed tasks from the old system are loaded into the activity feed with their original dates and authors. Authors must exist as users or be recorded in the text. The feed is long on an old case, so staff are shown how to filter it before go-live.
Billing is a separate switch
The Billing section only appears once Billing is enabled for the firm. Time entries, invoices and trust balances from the old system need that in place before they can be loaded. A firm that leaves it off can still record case costs in a collection section built for the purpose.
How NewLaw runs it
Four steps, in this order.
Nothing financial lands in Filevine on this route, which makes it repeatable: a load can be run again until it is right.
Analysis
We read what Box holds and how it is organised, then agree with you where each kind of record will sit in Filevine. Anything with no place there stays behind or is archived, and you see which before the move.
Clean-up
Duplicate clients, matters and folders are merged where they can be identified, and naming is put into one format, before anything is copied. It is not always possible to find every one, so some may carry across.
Trial load
A trial is loaded into Filevine and checked against Box: record and file counts, the links between records, document dates, and a sample opened by your own people. Exceptions are listed for you to decide.
Cutover
There is no financial cutover on this route. After a short freeze on changes in Box, a final pass over a weekend picks up what changed since the trial. Box is kept read only as the fall-back record.
Fixed price, agreed after the analysis. How NewLaw moves legal data
Start
Start this migration
Tell us what is in Box and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.
Step 1 of 5
What happens after you send it
- A free first call
We go through your answers with you and ask about anything they leave open.
- An analysis of what Box holds
What is in it, how its records link, and where each piece would sit in Filevine. Anything with no place there comes across as a note or stays behind, and you see which before the move.
- A fixed price in writing
Set after the analysis, so it reflects what is in your data. You have it before any work starts.
Beyond the data
Setting up Filevine
Loaded data is not yet a working system. This is what NewLaw sets up in Filevine, beyond the migration, so that people can work in it from the first day.
Filevine arrives as a platform to be configured, and most of the implementation is design. Someone has to decide what a project looks like for each kind of work the firm does, what moves it from one phase to the next, and who can see what. Those decisions are made with the people who run the files, then built and tested.
Set-up decisions in Filevine
- Design project types, sections and fields for each practice area
- Define phases and the tasks each phase should trigger
- Build document templates that fill from project fields
- Set teams, permissions and protected sections for restricted matters
- Decide whether Billing and Payments are switched on
- Connect Lead Docket so signed leads become projects
Questions
Box to Filevine: what firms ask
Do our document versions come across from Box?
Only versions Box still holds can be moved, and that number depends on the plan. How they arrive depends on the destination: a document management system usually has version slots, a plain drive does not. The trial load can show one sample matter both ways if the firm is undecided.
What happens to folders we shared with clients?
The collaborators and shared links belong to Box and do not transfer. Before cutover the firm gets a list of every folder with outside access. If the new system has a client portal or its own sharing, access is set up there, and clients are told where to find their documents from then on.
Can we move only open matters and leave the rest in Box?
Yes, if the folder names or metadata show which matters are open. Where they do not, the open matter list from the practice management system is matched to folders by client and matter number. Closed folders can stay in Box read only for as long as the firm keeps the subscription.
Do documents from Box keep their folders and dates in Filevine?
Filevine stores documents. Docs section with folders. Templated project folders can be set per type. Each file is placed under the client and matter it came from, and created and modified dates are carried, so a document still shows when it was written. The trial load is checked by count and by opening a sample.
Does everything in Box have a place in Filevine?
On paper, yes: each kind of record Box holds has a place in Filevine. Whether every field fits is a separate question, and the analysis answers it field by field. Anything with no place comes across as a note or stays behind, and you see which before the move.
What has to be decided before Box data is loaded into Filevine?
Custom fields and templates are carried with mapping, so each mapping is agreed with you first. The firm also decides which closed matters and how many versions of a document are in scope.
Other routes
Other routes from Box and into Filevine
Where to start
Before and after the move.
Choosing the system comes before a migration. Setting it up and putting AI to work come after.
Choose your systems
Technology stack selection
Decide which practice management system your firm runs, with the evidence and the cost beside it.
About four weeks for a firm of about 15 people. Fixed price, set after a free first call.
Move your data
Data migration
Your data is cleaned up before anything moves, then a trial load is checked against the old system.
Fixed price, agreed after the analysis.
Set up your new system
Implementation
Your new system set up around the way your firm works: configuration, document automation and training.
A small firm of 1 to 10 users typically takes 4 to 8 weeks. A mid-sized firm of 10 to 50 users takes 8 to 16 weeks.
Put AI to work
AI advisory and enablement
A small group of your people learn to use an approved AI tool on real work, under written rules.
Two to four weeks for a small first group. Fixed price, set after a free first call.
Box and Filevine are the names and marks of their owners, used here only to identify the two systems.
Moving from Box to Filevine?
Tell us what you are moving. You get a plan and a fixed price after the analysis.
We reply within one business day.