Data migration route
Amazon S3 to Gladiate migration
Amazon S3 is cloud file storage, and Gladiate is a cloud case management system for personal injury work. The move is matching each file in Amazon S3 to its case in Gladiate.
Amazon S3Cloud- Documents: Carried across
- Emails: Confirmed in the analysis
- Custom fields: Confirmed in the analysis
GladiateCloud- 1 carried
- 2 to confirm
What moves
What moves from Amazon S3 to Gladiate
Each row is a kind of record Amazon S3 holds, whether Gladiate has a place for it, and what is planned. On this route one kind of record carries across and two kinds are confirmed in the analysis.
| Record | What is planned | ||
|---|---|---|---|
| DocumentsFiles stored in or linked from the system | HeldObjects in buckets; a folder is only the part of the key before a slash. | Has a placeFiled to the firm’s folder structure. | Carried across |
| EmailsEmails saved to matters or to the store | Held in partOnly where messages were saved to the bucket as files such as .msg or .eml. | To be confirmed | Confirmed in the analysis |
| Custom fieldsFields and record types the firm added itself | Held in partObjects can carry user-defined metadata and tags as name and value pairs. | To be confirmed | Confirmed in the analysis |
What the plans mean
- Carried across
- Gladiate has a place for this kind of record. It is loaded there and checked against Amazon S3.
- Confirmed in the analysis
- We could not confirm this from the two products’ own material, so it is checked against your data before the plan is fixed.
The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.
This kind of move
Every document goes to the case it belongs to.
A case management system expects each document to sit on a case, usually in a category such as correspondence, medical records or court documents. Amazon S3 organises files its own way, by profile or by folder. So the move needs two rules: which case a file belongs to, and which category it goes in. The first comes from client and matter references or folder names. The second comes from a document type or a subfolder, and where neither exists the files arrive uncategorised and are marked as such.
Cases must exist in Gladiate before documents can be attached to them. If the system is already live, files are matched to its case list and the unmatched ones are reported. If it is new, the case list is created first. Dates, authors and file names are kept. Email comes across as message files. Where several versions of a document exist, the firm chooses between loading the latest and loading them all.
Both are hosted by their makers, so nothing is collected from the firm’s office. What can be taken out of Amazon S3 depends on its export tools and on what its maker provides on request, and that is confirmed during the analysis, before a date is set. The subscription to Amazon S3 is kept running until the checks on Gladiate are finished.
Where the data is now
Leaving Amazon S3
Moving a firm’s files out of S3 starts with finding out who put them there and how they are named. A bucket filled by a person usually mirrors a client and matter folder tree. One filled by an application may hold nothing but numbered objects, with the real file names kept in that application’s database. Those are different jobs, and the analysis says which one this is.
Folders are part of the name
S3 has no folders. A key such as Clients/Nguyen/2019-0412/Letter.pdf is one long name, and the console draws folders from the slashes. Keys can run to 1,024 bytes, far longer than Windows or SharePoint accept, and may contain characters they reject. Those keys are listed in the analysis and shortened by an agreed rule.
Modified dates are upload dates
The date S3 records against an object is the date it was written to the bucket. A letter drafted in 2014 and uploaded in 2021 shows as 2021. Unless the original date was kept in object metadata or in an index, it cannot be recovered from S3, and document dates in the new system will reflect that.
Archive classes need a restore
Objects in the S3 Glacier Flexible Retrieval and Deep Archive storage classes cannot be read straight away. Each has to be restored to a temporary copy first, which takes time and is charged by AWS. Closed-matter archives are often stored this way, so the restore is requested before the trial load, not during it.
Versions exist only if enabled
Versioning is off unless someone switched it on for the bucket. Where it is on, every overwrite keeps the earlier object in full, and a deleted file sits behind a delete marker and is not removed. The firm decides whether earlier versions and deleted objects move, because a plain copy of the bucket brings only the current ones.
Application buckets need the database
Where a practice or document system used the bucket as its store, the keys are often identifiers and not file names. The matter, the document title and the author live in that system’s database. Copying the bucket alone produces thousands of unnamed files, so the objects are matched to their records before anything is loaded.
Where it is going
Arriving in Gladiate
Gladiate is a destination for personal injury firms, and what it expects is injury data: a client, an incident, coverage, providers and a case status. Loading a firm into it means shaping the old system’s records into that pattern and preparing the templates, task plans and folder structure that the vendor’s onboarding asks each firm to supply.
Injury fields come first
Coverage, liability and medical details are what the product is designed to put in front of staff. In the old system they may be in custom fields, notes or a spreadsheet. They are pulled into columns during the analysis, so a loaded case shows its insurer and policy details and not an empty panel.
Templates and task plans
The vendor’s onboarding has each firm set up its own document templates, task plans, litigation deadlines and questionnaires. These are prepared from what the firm uses now. Merge fields in old templates are replaced with Gladiate’s, and task plans are written down stage by stage before anyone builds them.
A folder structure per case
Documents are filed in a folder structure the firm defines. The old system’s folders or categories are mapped to it once, and every case is loaded to the same pattern. Files with no clear category go to a holding folder on the case and are listed, not scattered.
What it may not hold
Time records, invoices and trust ledgers are not described on the vendor’s public pages. A firm that needs those carried over has it confirmed in the analysis. If there is no place for them, balances stay in the accounting package and the detailed history is kept in the old system, read only.
How NewLaw runs it
Four steps, in this order.
Nothing financial lands in Gladiate on this route, which makes it repeatable: a load can be run again until it is right.
Analysis
We read what Amazon S3 holds and how it is organised, then agree with you where each kind of record will sit in Gladiate. Anything with no place there stays behind or is archived, and you see which before the move.
Clean-up
Duplicate clients, matters and folders are merged where they can be identified, and naming is put into one format, before anything is copied. It is not always possible to find every one, so some may carry across.
Trial load
A trial is loaded into Gladiate and checked against Amazon S3: record and file counts, the links between records, document dates, and a sample opened by your own people. Exceptions are listed for you to decide.
Cutover
There is no financial cutover on this route. After a short freeze on changes in Amazon S3, a final pass over a weekend picks up what changed since the trial. Amazon S3 is kept read only as the fall-back record.
Fixed price, agreed after the analysis. How NewLaw moves legal data
Start
Start this migration
Tell us what is in Amazon S3 and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.
Step 1 of 5
What happens after you send it
- A free first call
We go through your answers with you and ask about anything they leave open.
- An analysis of what Amazon S3 holds
What is in it, how its records link, and where each piece would sit in Gladiate. Anything with no place there comes across as a note or stays behind, and you see which before the move.
- A fixed price in writing
Set after the analysis, so it reflects what is in your data. You have it before any work starts.
Beyond the data
Setting up Gladiate
Loaded data is not yet a working system. This is what NewLaw sets up in Gladiate, beyond the migration, so that people can work in it from the first day.
Gladiate is delivered ready for injury work, so set-up is about making it the firm’s own. The vendor’s onboarding covers templates, task plans, folder structure, litigation deadlines and client questionnaires. Each of those is a decision the firm has to make, and it goes faster when current practice has been written down beforehand.
Set-up decisions in Gladiate
- Set up and test the firm’s document templates
- Write task plans for each stage of a case
- Agree one folder structure for case documents
- Enter litigation deadlines for the firm’s jurisdictions
- Prepare client questionnaires, surveys and scheduled case updates
- Connect Outlook or Google calendars for two-way sync
Questions
Amazon S3 to Gladiate: what firms ask
Our IT provider set the bucket up. What do you need from them?
Access to read the bucket, arranged in whatever way the firm and its provider decide, and the region it sits in. They are also asked whether versioning is on, whether any objects are in an archive storage class, and whether a person or an application wrote the files. Moving the files out means reading them, so write access is not part of the request.
Will our client and matter folders look the same in the new system?
In outline, if the keys follow a client and matter pattern. Each part of the key between slashes becomes a folder, or is read as the client, the matter number and the document name where the destination files by matter. Keys that fit no pattern are listed for the firm to place by hand or leave in an unsorted folder.
Can the bucket stay as our archive after the move?
It can. A firm may move its active matters into the new system and leave closed files where they are. What matters then is that someone at the firm, not only the IT provider, holds the AWS account details and knows how to find one closed file by client name. That is worth writing down before the project ends.
Do documents from Amazon S3 keep their folders and dates in Gladiate?
Gladiate stores documents. Filed to the firm’s folder structure. Each file is placed under the client and matter it came from, and created and modified dates are carried, so a document still shows when it was written. The trial load is checked by count and by opening a sample.
Does everything in Amazon S3 have a place in Gladiate?
Most of it does on paper. Emails and custom fields could not be confirmed from the two products’ own material, so those are checked in the analysis. Anything that turns out to have no place in Gladiate is kept as a readable archive, and you see which before the move.
What has to be decided before Amazon S3 data is loaded into Gladiate?
Emails and custom fields are confirmed in the analysis. The firm also decides which closed matters and how many versions of a document are in scope.
Other routes
Other routes from Amazon S3 and into Gladiate
Where to start
Before and after the move.
Choosing the system comes before a migration. Setting it up and putting AI to work come after.
Choose your systems
Technology stack selection
Decide which practice management system your firm runs, with the evidence and the cost beside it.
About four weeks for a firm of about 15 people. Fixed price, set after a free first call.
Move your data
Data migration
Your data is cleaned up before anything moves, then a trial load is checked against the old system.
Fixed price, agreed after the analysis.
Set up your new system
Implementation
Your new system set up around the way your firm works: configuration, document automation and training.
A small firm of 1 to 10 users typically takes 4 to 8 weeks. A mid-sized firm of 10 to 50 users takes 8 to 16 weeks.
Put AI to work
AI advisory and enablement
A small group of your people learn to use an approved AI tool on real work, under written rules.
Two to four weeks for a small first group. Fixed price, set after a free first call.
Amazon S3 and Gladiate are the names and marks of their owners, used here only to identify the two systems.
Moving from Amazon S3 to Gladiate?
Tell us what you are moving. You get a plan and a fixed price after the analysis.
We reply within one business day.