Data migration route
Tabs3 Trust Accounting to SurePoint Finance Enterprise migration
Tabs3 Trust Accounting is a server-based accounting and billing system, and SurePoint Finance Enterprise is a cloud practice management system. The financial records lead: balances and open items move, and the matters in SurePoint Finance Enterprise are built around them.
Tabs3 Trust AccountingServer- Matters: Carried across
- Contacts: Carried across
- Trust money: Carried across
- Notes: Confirmed in the analysis
- Custom fields: Confirmed in the analysis
- Templates: Confirmed in the analysis
SurePoint Finance EnterpriseCloud- 3 carried
- 3 to confirm
What moves
What moves from Tabs3 Trust Accounting to SurePoint Finance Enterprise
Each row is a kind of record Tabs3 Trust Accounting holds, whether SurePoint Finance Enterprise has a place for it, and what is planned. On this route three kinds of record carry across and three kinds are confirmed in the analysis.
| Record | What is planned | ||
|---|---|---|---|
| MattersMatters or cases, with their numbers, types, parties and status | Held in partTrust accounts are keyed by a Trust ID in the same format as client numbers. | Has a place | Carried across |
| ContactsClients, other parties and referrers | Held in partShares client and contact details with Billing and PracticeMaster. | Has a place | Carried across |
| NotesFile notes, matter notes and contact notes | To be confirmed | To be confirmed | Confirmed in the analysis |
| Trust moneyTrust or client account ledgers and balances | HeldTrust ledgers, cheques and EFTs, bank reconciliation and a 3-Way Reconciliation Report. | Has a place | Carried across |
| Custom fieldsFields and record types the firm added itself | To be confirmed | To be confirmed | Confirmed in the analysis |
| TemplatesPrecedents, document templates and automation | To be confirmed | To be confirmed | Confirmed in the analysis |
What the plans mean
- Carried across
- SurePoint Finance Enterprise has a place for this kind of record. It is loaded there and checked against Tabs3 Trust Accounting.
- Confirmed in the analysis
- We could not confirm this from the two products’ own material, so it is checked against your data before the plan is fixed.
The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.
This kind of move
Time, bills and balances move. How much history is a decision.
Coming from an accounting or billing system, the records that count are balances: unbilled time, unpaid invoices, client funds, the ledger. A practice management system takes these as opening positions on a matter. So every client and job in Tabs3 Trust Accounting needs a matter to land on, and the first piece of work is building that matter list, often from client and project codes that were never meant to be matter numbers.
How much history to bring is the main choice. Paid invoices from years ago can be loaded as records, kept as PDF copies on the matter, or left in a read-only copy of Tabs3 Trust Accounting. Most firms bring open items and a period of history, and keep the rest as reports. Opening balances in SurePoint Finance Enterprise are agreed to the trial balance and aged debtors from Tabs3 Trust Accounting as at the cutover date, and that load is rehearsed before it is done for real.
Tabs3 Trust Accounting runs on the firm’s own equipment, so the data is collected there: a copy of the database and the folders its documents sit in, taken with the firm’s IT provider or over a remote session. SurePoint Finance Enterprise is hosted by its maker, so loading depends on the import tools and access it provides. The old machine is kept, read only, as the fall-back record.
Where the data is now
Leaving Tabs3 Trust Accounting
Trust is the one part of a Tabs3 move that cannot be re-run casually. Each trust account balance is taken at an agreed date, by Trust ID and by bank account, and proved against a completed three-way reconciliation. The same figures are rehearsed on a full trial load. Only then is the cutover booked, and the old program is kept so past ledgers can be printed.
A trust account is a ledger
In this program a trust account means one client’s ledger, and a bank account is a separate record. Many trust accounts sit in one bank account. A destination that uses the words differently needs the mapping written down: Trust ID to matter, bank account to bank account.
Trust IDs mirror Client IDs
Trust IDs use the same key type and decimal places as client numbers, so a trust account normally lines up with a client and matter in Billing. Where a firm opened extra trust accounts for one matter, or one for several, those are found in the analysis and the firm decides which matter each balance belongs to.
Payments to the firm
A trust cheque or EFT marked as a payment to the firm posts to the client’s statement in Billing, or to General Ledger where Billing is not installed. Cutover falls between those two sides. The freeze begins only after every such payment has posted both ways, so no fee is paid in one system and unpaid in the other.
Uncleared items at cutover
Opening balances in the new system are ledger balances, but the first bank reconciliation there needs the uncleared cheques and deposits as well. Those are extracted as a list from the last Tabs3 reconciliation, for each bank account, and entered so the opening bank position agrees to the statement.
1099 totals and year end
Trust payees can be reported on 1099 forms, combined with Accounts Payable vendors. A mid-year move leaves part of the year’s payments in each system. Year-to-date totals for each payee are extracted so the firm’s year-end 1099 run is complete.
Where it is going
Arriving in SurePoint Finance Enterprise
Moving into SurePoint Finance Enterprise, the system long sold as LMS, is an accounting implementation with a data load inside it. The entity structure, chart of accounts and billing rules are designed before records arrive, because every time entry and payment posts into them. Smaller systems rarely hold data at that level of detail, so part of the preparation is adding what the source never recorded.
Entities and tax IDs first
The system can hold several legal entities and tax IDs. A firm coming from a single QuickBooks file, or from two files for two offices, decides how it wants to be structured from here on. That decision fixes where each bank account and matter belongs, and it is hard to revisit once history is posted.
History has to balance
Billing, trust and the general ledger are parts of one system, so loaded history must agree across all three. A receivable carried in for a matter needs the invoice behind it and the ledger entry behind that. Source systems that kept billing and accounts apart are reconciled to each other before extraction.
E-billing detail on time entries
For LEDES e-billing, time entries need task and activity codes and timekeepers need the classifications clients expect. A small-firm system may never have captured them. The firm decides whether historic entries are loaded uncoded as history only, with coding starting on new work from go-live.
Dockets as well as appointments
Calendars and dockets are both kept. In many source systems a court deadline and a client lunch are the same kind of record. The two are separated on the way in, using event types or keywords, and the docket entries for open matters are checked by the lawyers responsible.
Cost recovery codes
Disbursements such as copying and postage arrive through cost recovery and post to the matter. The cost types and their rates are set up to match how the firm charges today. Unbilled disbursements from the old system are then loaded against those types so they can be billed normally.
How NewLaw runs it
Four steps, in this order.
Trust money moves on this route, so the trust cutover gets a rehearsal of its own.
Analysis
We read what Tabs3 Trust Accounting holds and how its records link, then agree with you, field by field, where each piece will sit in SurePoint Finance Enterprise. Anything with no place there comes across as a note or stays behind, and you see which before the move.
Clean-up
Duplicate contacts and matters are merged where they can be identified, and inconsistent entries are put into one format, in Tabs3 Trust Accounting, before extraction. It is not always possible to find every one, so some may carry across.
Trial load
The data is loaded into SurePoint Finance Enterprise as a trial and checked against Tabs3 Trust Accounting: record counts, trust and debtor totals, the links between records, document dates. Exceptions are listed for you to decide.
Cutover
Changes in Tabs3 Trust Accounting are frozen for an agreed window, the data is collected a final time and SurePoint Finance Enterprise goes live over a weekend. The trust and financial cutover is rehearsed on a full trial load first, because it cannot be re-run the way a document load can. Tabs3 Trust Accounting is kept read only as the fall-back record.
Fixed price, agreed after the analysis. How NewLaw moves legal data
Start
Start this migration
Tell us what is in Tabs3 Trust Accounting and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.
Step 1 of 5
What happens after you send it
- A free first call
We go through your answers with you and ask about anything they leave open.
- An analysis of what Tabs3 Trust Accounting holds
What is in it, how its records link, and where each piece would sit in SurePoint Finance Enterprise. Anything with no place there comes across as a note or stays behind, and you see which before the move.
- A fixed price in writing
Set after the analysis, so it reflects what is in your data. You have it before any work starts.
Beyond the data
Setting up SurePoint Finance Enterprise
Loaded data is not yet a working system. This is what NewLaw sets up in SurePoint Finance Enterprise, beyond the migration, so that people can work in it from the first day.
The set-up decisions in Finance Enterprise are mostly made by the finance team. They cover the firm’s entity structure, its chart of accounts, how bills are approved and sent, and what each client’s e-billing portal demands. Timekeepers need rates and classifications. The reports used for partner compensation are specified early, because they test whether the structure underneath is right.
Set-up decisions in SurePoint Finance Enterprise
- Entity structure, tax IDs and the chart of accounts
- Bank and trust accounts with reconciliation set-up
- Timekeeper rates, classifications and task code sets
- Pre-bill approval steps and client billing rules
- LEDES e-billing formats for each corporate client
- Management and compensation reports the partners use
Questions
Tabs3 Trust Accounting to SurePoint Finance Enterprise: what firms ask
Can trust be moved at a different time from billing?
It can, though it is rarely worth it. Trust balances show on statements and trust payments settle bills, so the two modules lean on each other. Moving them on the same weekend keeps one cut-off date. If they must be staged, the manual steps in between are agreed first.
Do closed trust ledgers come across?
Zero-balance trust accounts for finished matters carry history a regulator may ask for. Their transactions can be loaded where the destination accepts historical trust entries. Otherwise the ledgers are printed to PDF per client and filed to the matter, and Tabs3 is kept read only for the retention period.
What if the three-way reconciliation is out?
Then the difference is found and fixed in Tabs3 first. Loading an unreconciled trust ledger only moves the problem into a system nobody knows yet. The analysis includes the latest reconciliation, and cutover is not scheduled until bank, book and client ledger totals agree.
Do trust balances in Tabs3 Trust Accounting have a place in SurePoint Finance Enterprise?
Yes. SurePoint Finance Enterprise keeps trust ledgers. Balances are loaded by matter and agreed to the trust report from Tabs3 Trust Accounting as at the cutover date. That load cannot be re-run the way a document load can, so it is rehearsed on a full trial load first.
Does everything in Tabs3 Trust Accounting have a place in SurePoint Finance Enterprise?
Most of it does on paper. Notes, custom fields and templates could not be confirmed from the two products’ own material, so those are checked in the analysis. Anything that turns out to have no place in SurePoint Finance Enterprise is kept as a readable archive, and you see which before the move.
What has to be decided before Tabs3 Trust Accounting data is loaded into SurePoint Finance Enterprise?
Notes, custom fields and templates are confirmed in the analysis. The firm also sets the cutover date and how much financial history comes across as live records.
Other routes
Other routes from Tabs3 Trust Accounting and into SurePoint Finance Enterprise
Other destinations from Tabs3 Trust Accounting
Other systems that move into SurePoint Finance Enterprise
Where to start
Before and after the move.
Choosing the system comes before a migration. Setting it up and putting AI to work come after.
Choose your systems
Technology stack selection
Decide which practice management system your firm runs, with the evidence and the cost beside it.
About four weeks for a firm of about 15 people. Fixed price, set after a free first call.
Move your data
Data migration
Your data is cleaned up before anything moves, then a trial load is checked against the old system.
Fixed price, agreed after the analysis.
Set up your new system
Implementation
Your new system set up around the way your firm works: configuration, document automation and training.
A small firm of 1 to 10 users typically takes 4 to 8 weeks. A mid-sized firm of 10 to 50 users takes 8 to 16 weeks.
Put AI to work
AI advisory and enablement
A small group of your people learn to use an approved AI tool on real work, under written rules.
Two to four weeks for a small first group. Fixed price, set after a free first call.
Tabs3 Trust Accounting and SurePoint Finance Enterprise are the names and marks of their owners, used here only to identify the two systems.
Moving from Tabs3 Trust Accounting to SurePoint Finance Enterprise?
Tell us what you are moving. You get a plan and a fixed price after the analysis.
We reply within one business day.