Data migration route
Tabs3 Accounts Payable to SurePoint Finance Enterprise migration
Tabs3 Accounts Payable is a server-based accounting and billing system, and SurePoint Finance Enterprise is a cloud practice management system. The financial records lead: balances and open items move, and the matters in SurePoint Finance Enterprise are built around them.
Tabs3 Accounts PayableServer- Contacts: Carried across
- Firm accounts: Carried across
- Notes: Confirmed in the analysis
- Custom fields: Confirmed in the analysis
- Templates: Confirmed in the analysis
SurePoint Finance EnterpriseCloud- 2 carried
- 3 to confirm
What moves
What moves from Tabs3 Accounts Payable to SurePoint Finance Enterprise
Each row is a kind of record Tabs3 Accounts Payable holds, whether SurePoint Finance Enterprise has a place for it, and what is planned. On this route two kinds of record carry across and three kinds are confirmed in the analysis.
| Record | What is planned | ||
|---|---|---|---|
| ContactsClients, other parties and referrers | Held in partVendors. | Has a place | Carried across |
| NotesFile notes, matter notes and contact notes | To be confirmed | To be confirmed | Confirmed in the analysis |
| Firm accountsGeneral ledger, office account and payables | HeldVendor invoices, cheques and EFTs, recurring entries and 1099s; posts to Tabs3 General Ledger. | Has a placeGeneral ledger and payables, by entity. | Carried across |
| Custom fieldsFields and record types the firm added itself | To be confirmed | To be confirmed | Confirmed in the analysis |
| TemplatesPrecedents, document templates and automation | To be confirmed | To be confirmed | Confirmed in the analysis |
What the plans mean
- Carried across
- SurePoint Finance Enterprise has a place for this kind of record. It is loaded there and checked against Tabs3 Accounts Payable.
- Confirmed in the analysis
- We could not confirm this from the two products’ own material, so it is checked against your data before the plan is fixed.
The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.
This kind of move
Time, bills and balances move. How much history is a decision.
Coming from an accounting or billing system, the records that count are balances: unbilled time, unpaid invoices, client funds, the ledger. A practice management system takes these as opening positions on a matter. So every client and job in Tabs3 Accounts Payable needs a matter to land on, and the first piece of work is building that matter list, often from client and project codes that were never meant to be matter numbers.
How much history to bring is the main choice. Paid invoices from years ago can be loaded as records, kept as PDF copies on the matter, or left in a read-only copy of Tabs3 Accounts Payable. Most firms bring open items and a period of history, and keep the rest as reports. Opening balances in SurePoint Finance Enterprise are agreed to the trial balance and aged debtors from Tabs3 Accounts Payable as at the cutover date, and that load is rehearsed before it is done for real.
Tabs3 Accounts Payable runs on the firm’s own equipment, so the data is collected there: a copy of the database and the folders its documents sit in, taken with the firm’s IT provider or over a remote session. SurePoint Finance Enterprise is hosted by its maker, so loading depends on the import tools and access it provides. The old machine is kept, read only, as the fall-back record.
Where the data is now
Leaving Tabs3 Accounts Payable
Payables is a small module with a narrow job, and moving it is mostly a question of where it goes. Few practice management systems pay suppliers, so the vendor list, unpaid invoices and recurring bills usually land in the firm’s accounting package. What has to be right on the day is the list of unpaid invoices and the payables balance in the ledger.
It rarely has a twin
Practice systems mostly leave supplier bills to Xero, QuickBooks or a similar package. So this module’s data usually goes to a different destination from the matters. The analysis names that destination, and the vendor list is set up there before unpaid invoices are loaded against it.
Unposted items
Invoices and cheques are entered first and posted to the general ledger later, by running the post programs. Anything entered but not yet posted is in payables and not in the ledger. All postings are run before the final extraction, so the unpaid invoice list and the ledger’s payables account agree.
Vendor numbers and key length
Vendors are numbered, and the firm set the key length in the module’s customisation. Other accounting packages identify suppliers by name or by their own code. The Tabs3 vendor number is kept as a reference on each supplier, so earlier payments can still be traced back.
Recurring entries
Rent, subscriptions and other regular bills are stored as recurring entries that the firm posts each period. They are not invoices yet, so they do not appear on the unpaid list. Each one is recreated as a recurring bill in the destination, with its next due date checked against the last one posted in Tabs3.
1099 totals mid-year
The module produces 1099 forms from the year’s vendor payments and can combine them with trust payees. If the move happens during a tax year, year-to-date payments per vendor are carried across as figures, so the forms can be produced from one place in January.
Where it is going
Arriving in SurePoint Finance Enterprise
Moving into SurePoint Finance Enterprise, the system long sold as LMS, is an accounting implementation with a data load inside it. The entity structure, chart of accounts and billing rules are designed before records arrive, because every time entry and payment posts into them. Smaller systems rarely hold data at that level of detail, so part of the preparation is adding what the source never recorded.
Entities and tax IDs first
The system can hold several legal entities and tax IDs. A firm coming from a single QuickBooks file, or from two files for two offices, decides how it wants to be structured from here on. That decision fixes where each bank account and matter belongs, and it is hard to revisit once history is posted.
History has to balance
Billing, trust and the general ledger are parts of one system, so loaded history must agree across all three. A receivable carried in for a matter needs the invoice behind it and the ledger entry behind that. Source systems that kept billing and accounts apart are reconciled to each other before extraction.
E-billing detail on time entries
For LEDES e-billing, time entries need task and activity codes and timekeepers need the classifications clients expect. A small-firm system may never have captured them. The firm decides whether historic entries are loaded uncoded as history only, with coding starting on new work from go-live.
Dockets as well as appointments
Calendars and dockets are both kept. In many source systems a court deadline and a client lunch are the same kind of record. The two are separated on the way in, using event types or keywords, and the docket entries for open matters are checked by the lawyers responsible.
Cost recovery codes
Disbursements such as copying and postage arrive through cost recovery and post to the matter. The cost types and their rates are set up to match how the firm charges today. Unbilled disbursements from the old system are then loaded against those types so they can be billed normally.
How NewLaw runs it
Four steps, in this order.
Financial records move on this route, so the balances are rehearsed before the real cutover.
Analysis
We read what Tabs3 Accounts Payable holds and how its records link, then agree with you, field by field, where each piece will sit in SurePoint Finance Enterprise. Anything with no place there comes across as a note or stays behind, and you see which before the move.
Clean-up
Duplicate contacts and matters are merged where they can be identified, and inconsistent entries are put into one format, in Tabs3 Accounts Payable, before extraction. It is not always possible to find every one, so some may carry across.
Trial load
The data is loaded into SurePoint Finance Enterprise as a trial and checked against Tabs3 Accounts Payable: record counts, financial totals, the links between records, document dates. Exceptions are listed for you to decide.
Cutover
Changes in Tabs3 Accounts Payable are frozen for an agreed window, the data is collected a final time and SurePoint Finance Enterprise goes live over a weekend. The financial cutover is rehearsed on a full trial load first, so that opening balances agree with the reports in Tabs3 Accounts Payable as at the cutover date. Tabs3 Accounts Payable is kept read only as the fall-back record.
Fixed price, agreed after the analysis. How NewLaw moves legal data
Start
Start this migration
Tell us what is in Tabs3 Accounts Payable and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.
Step 1 of 5
What happens after you send it
- A free first call
We go through your answers with you and ask about anything they leave open.
- An analysis of what Tabs3 Accounts Payable holds
What is in it, how its records link, and where each piece would sit in SurePoint Finance Enterprise. Anything with no place there comes across as a note or stays behind, and you see which before the move.
- A fixed price in writing
Set after the analysis, so it reflects what is in your data. You have it before any work starts.
Beyond the data
Setting up SurePoint Finance Enterprise
Loaded data is not yet a working system. This is what NewLaw sets up in SurePoint Finance Enterprise, beyond the migration, so that people can work in it from the first day.
The set-up decisions in Finance Enterprise are mostly made by the finance team. They cover the firm’s entity structure, its chart of accounts, how bills are approved and sent, and what each client’s e-billing portal demands. Timekeepers need rates and classifications. The reports used for partner compensation are specified early, because they test whether the structure underneath is right.
Set-up decisions in SurePoint Finance Enterprise
- Entity structure, tax IDs and the chart of accounts
- Bank and trust accounts with reconciliation set-up
- Timekeeper rates, classifications and task code sets
- Pre-bill approval steps and client billing rules
- LEDES e-billing formats for each corporate client
- Management and compensation reports the partners use
Questions
Tabs3 Accounts Payable to SurePoint Finance Enterprise: what firms ask
Do paid invoices need to come across?
Usually not as transactions. Paid supplier invoices are already reflected in the ledger balances. Firms keep the paid history readable in Tabs3 and carry over open invoices, the vendor list and the current year’s payment totals. If the accountant wants prior-year detail in the new package, that is agreed during the analysis.
Where do client costs paid through payables go?
A supplier invoice for a client’s matter is both a payable and a cost to recover. In the new set-up the supplier side goes to the accounting package and the recoverable cost goes to the matter as an unbilled disbursement. Open items are checked on both sides, so none is paid twice or left unbilled.
Can payables move before the rest of Tabs3?
It can, because suppliers do not depend on the matter data. Where the module is integrated with Tabs3 General Ledger, though, every invoice and cheque posts there. If the ledger is moving to a new package, payables moves with it at the same period end, or someone posts by hand in between.
Do contacts from Tabs3 Accounts Payable arrive in SurePoint Finance Enterprise without duplicates?
SurePoint Finance Enterprise has a place for contacts. Duplicates are merged in Tabs3 Accounts Payable before extraction where they can be identified, and the list is matched against contacts already in SurePoint Finance Enterprise. It is not always possible to find every one, so some may carry across.
Does everything in Tabs3 Accounts Payable have a place in SurePoint Finance Enterprise?
Most of it does on paper. Notes, custom fields and templates could not be confirmed from the two products’ own material, so those are checked in the analysis. Anything that turns out to have no place in SurePoint Finance Enterprise is kept as a readable archive, and you see which before the move.
What has to be decided before Tabs3 Accounts Payable data is loaded into SurePoint Finance Enterprise?
Notes, custom fields and templates are confirmed in the analysis. The firm also sets the cutover date and how much financial history comes across as live records.
Other routes
Other routes from Tabs3 Accounts Payable and into SurePoint Finance Enterprise
Other destinations from Tabs3 Accounts Payable
Other systems that move into SurePoint Finance Enterprise
Where to start
Before and after the move.
Choosing the system comes before a migration. Setting it up and putting AI to work come after.
Choose your systems
Technology stack selection
Decide which practice management system your firm runs, with the evidence and the cost beside it.
About four weeks for a firm of about 15 people. Fixed price, set after a free first call.
Move your data
Data migration
Your data is cleaned up before anything moves, then a trial load is checked against the old system.
Fixed price, agreed after the analysis.
Set up your new system
Implementation
Your new system set up around the way your firm works: configuration, document automation and training.
A small firm of 1 to 10 users typically takes 4 to 8 weeks. A mid-sized firm of 10 to 50 users takes 8 to 16 weeks.
Put AI to work
AI advisory and enablement
A small group of your people learn to use an approved AI tool on real work, under written rules.
Two to four weeks for a small first group. Fixed price, set after a free first call.
Tabs3 Accounts Payable and SurePoint Finance Enterprise are the names and marks of their owners, used here only to identify the two systems.
Moving from Tabs3 Accounts Payable to SurePoint Finance Enterprise?
Tell us what you are moving. You get a plan and a fixed price after the analysis.
We reply within one business day.