Data migration route
Tabs3 Trust Accounting to Lawmatics migration
Tabs3 Trust Accounting is a server-based accounting and billing system, and Lawmatics is a cloud CRM and intake system. Lawmatics is built around people and enquiries, so the contact list leads this move, and the table shows what else has a place.
Tabs3 Trust AccountingServer- Matters: Carried across
- Contacts: Carried across
- Trust money: Carried with mapping
- Notes: Confirmed in the analysis
- Custom fields: Confirmed in the analysis
- Templates: Confirmed in the analysis
LawmaticsCloud- 2 carried
- 1 mapped
- 3 to confirm
What moves
What moves from Tabs3 Trust Accounting to Lawmatics
Each row is a kind of record Tabs3 Trust Accounting holds, whether Lawmatics has a place for it, and what is planned. On this route two kinds of record carry across, one kind needs mapping and three kinds are confirmed in the analysis.
| Record | What is planned | ||
|---|---|---|---|
| MattersMatters or cases, with their numbers, types, parties and status | Held in partTrust accounts are keyed by a Trust ID in the same format as client numbers. | Has a placeLoaded from CSV with a status of PNC, Hired or Lost and a pipeline stage. | Carried across |
| ContactsClients, other parties and referrers | Held in partShares client and contact details with Billing and PracticeMaster. | Has a placeContacts and companies load from CSV; relationships link further parties to a matter. | Carried across |
| NotesFile notes, matter notes and contact notes | To be confirmed | Has a placeNotes on matters, contacts and companies. | Confirmed in the analysis |
| Trust moneyTrust or client account ledgers and balances | HeldTrust ledgers, cheques and EFTs, bank reconciliation and a 3-Way Reconciliation Report. | Has a place in partA trust account with a running balance; deposits are allocated to a contact and matter. | Carried with mapping |
| Custom fieldsFields and record types the firm added itself | To be confirmed | Has a placeMatter, contact and company fields. A field must exist before data is imported into it. | Confirmed in the analysis |
| TemplatesPrecedents, document templates and automation | To be confirmed | Has a place in partDocument and email templates are rebuilt with Lawmatics merge fields. | Confirmed in the analysis |
What the plans mean
- Carried across
- Lawmatics has a place for this kind of record. It is loaded there and checked against Tabs3 Trust Accounting.
- Carried with mapping
- Lawmatics holds this differently, or in part. Each field or value is matched to its place before loading, and you see the mapping first.
- Confirmed in the analysis
- We could not confirm this from the two products’ own material, so it is checked against your data before the plan is fixed.
The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.
This kind of move
Mostly a contact list, cleaned before it lands.
Lawmatics is built for contacts, leads and the conversations around them. What Tabs3 Trust Accounting can offer it first is a list of people and companies, and sometimes a history that can be attached as notes. Whether anything else it holds has a place depends on what Lawmatics keeps besides contacts, and the table above shows that kind by kind. What has no place stays where it is or is archived.
A contact list taken from a system that was never a CRM needs work before it is useful. Names are split or joined differently, the same client appears under several spellings, and there is no record of who agreed to be contacted. The list is cleaned and de-duplicated, matched against what Lawmatics already holds, and loaded with a source tag, so the firm can tell these contacts from the ones that came through intake.
Tabs3 Trust Accounting runs on the firm’s own equipment, so the data is collected there: a copy of the database and the folders its documents sit in, taken with the firm’s IT provider or over a remote session. Lawmatics is hosted by its maker, so loading depends on the import tools and access it provides. The old machine is kept, read only, as the fall-back record.
Where the data is now
Leaving Tabs3 Trust Accounting
Trust is the one part of a Tabs3 move that cannot be re-run casually. Each trust account balance is taken at an agreed date, by Trust ID and by bank account, and proved against a completed three-way reconciliation. The same figures are rehearsed on a full trial load. Only then is the cutover booked, and the old program is kept so past ledgers can be printed.
A trust account is a ledger
In this program a trust account means one client’s ledger, and a bank account is a separate record. Many trust accounts sit in one bank account. A destination that uses the words differently needs the mapping written down: Trust ID to matter, bank account to bank account.
Trust IDs mirror Client IDs
Trust IDs use the same key type and decimal places as client numbers, so a trust account normally lines up with a client and matter in Billing. Where a firm opened extra trust accounts for one matter, or one for several, those are found in the analysis and the firm decides which matter each balance belongs to.
Payments to the firm
A trust cheque or EFT marked as a payment to the firm posts to the client’s statement in Billing, or to General Ledger where Billing is not installed. Cutover falls between those two sides. The freeze begins only after every such payment has posted both ways, so no fee is paid in one system and unpaid in the other.
Uncleared items at cutover
Opening balances in the new system are ledger balances, but the first bank reconciliation there needs the uncleared cheques and deposits as well. Those are extracted as a list from the last Tabs3 reconciliation, for each bank account, and entered so the opening bank position agrees to the statement.
1099 totals and year end
Trust payees can be reported on 1099 forms, combined with Accounts Payable vendors. A mid-year move leaves part of the year’s payments in each system. Year-to-date totals for each payee are extracted so the firm’s year-end 1099 run is complete.
Where it is going
Arriving in Lawmatics
Lawmatics takes matters, contacts and companies from CSV files, and its API accepts notes, tasks, appointments, files, time entries and invoices. It is an intake and client relationship system, so a firm arriving from full practice management has to decide what it is for. People and matters load well. There is no general ledger, and years of billing history have no natural home.
Contacts and matters load separately
The import expects two spreadsheets: one for contacts or companies with no case, such as referrers and other lawyers, and one for matters. A matter import creates the matter and its primary contact together. Every matter has exactly one primary contact, so joint clients are loaded as one primary and one relationship.
Set up before loading
Owner, stage, practice area, source and campaign are matched by name. A value on the spreadsheet that does not match one in Lawmatics exactly creates a new one, which is how a firm ends up with two spellings of the same practice area. Users, pipelines, practice areas and marketing sources are set up first, and custom fields must exist before data is loaded into them.
Statuses and matter numbers
Each imported matter must be PNC (potential new client), Hired or Lost, with open and closed handled as sub-statuses the firm creates. The case number is a system field assigned by an auto-numbering pattern and cannot be edited by hand afterwards. Whether old matter numbers can be loaded into it, or belong in a custom field, is tested in the trial load.
Duplicates are matched by email
With Match Contacts by Email switched on, a contact whose email already exists is skipped or updated, never doubled. Names and phone numbers are not checked. Matters are not deduplicated at all, so two rows with one email create two matters on one contact. Clean-up therefore happens in the spreadsheet, and automations are switched off for every load.
What has no place
There is no general ledger. The Time & Billing module holds time entries, expenses, invoices and a trust account with a running balance per matter, and past invoices are entered as already sent and then marked paid. A firm that needs its full accounting history keeps the old system read only or carries the books in an accounting package.
How NewLaw runs it
Four steps, in this order.
Trust money moves on this route, so the trust cutover gets a rehearsal of its own.
Analysis
We read what Tabs3 Trust Accounting holds and how its records link, then agree with you, field by field, where each piece will sit in Lawmatics. Anything with no place there comes across as a note or stays behind, and you see which before the move.
Clean-up
Duplicate contacts and matters are merged where they can be identified, and inconsistent entries are put into one format, in Tabs3 Trust Accounting, before extraction. It is not always possible to find every one, so some may carry across.
Trial load
The data is loaded into Lawmatics as a trial and checked against Tabs3 Trust Accounting: record counts, trust and debtor totals, the links between records, document dates. Exceptions are listed for you to decide.
Cutover
Changes in Tabs3 Trust Accounting are frozen for an agreed window, the data is collected a final time and Lawmatics goes live over a weekend. The trust and financial cutover is rehearsed on a full trial load first, because it cannot be re-run the way a document load can. Tabs3 Trust Accounting is kept read only as the fall-back record.
Fixed price, agreed after the analysis. How NewLaw moves legal data
Start
Start this migration
Tell us what is in Tabs3 Trust Accounting and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.
Step 1 of 5
What happens after you send it
- A free first call
We go through your answers with you and ask about anything they leave open.
- An analysis of what Tabs3 Trust Accounting holds
What is in it, how its records link, and where each piece would sit in Lawmatics. Anything with no place there comes across as a note or stays behind, and you see which before the move.
- A fixed price in writing
Set after the analysis, so it reflects what is in your data. You have it before any work starts.
Beyond the data
Setting up Lawmatics
Loaded data is not yet a working system. This is what NewLaw sets up in Lawmatics, beyond the migration, so that people can work in it from the first day.
In Lawmatics the design comes before the data. The pipeline stages, practice areas, custom fields and relationship types decide what the import can hold, and the forms and automations decide what the firm’s intake looks like from the first day. If a practice system sits behind it, the field mapping between the two is part of the same job.
Set-up decisions in Lawmatics
- Pipelines and stages for intake and for open matters
- Practice areas, sub-statuses, relationship types and the matter numbering pattern
- Custom fields on matters, contacts and companies
- Intake forms, booking links and e-signature document templates
- Follow-up automations, with marketing sources and campaigns
- Mail and calendar sync, user roles and practice system integration
Questions
Tabs3 Trust Accounting to Lawmatics: what firms ask
Can trust be moved at a different time from billing?
It can, though it is rarely worth it. Trust balances show on statements and trust payments settle bills, so the two modules lean on each other. Moving them on the same weekend keeps one cut-off date. If they must be staged, the manual steps in between are agreed first.
Do closed trust ledgers come across?
Zero-balance trust accounts for finished matters carry history a regulator may ask for. Their transactions can be loaded where the destination accepts historical trust entries. Otherwise the ledgers are printed to PDF per client and filed to the matter, and Tabs3 is kept read only for the retention period.
What if the three-way reconciliation is out?
Then the difference is found and fixed in Tabs3 first. Loading an unreconciled trust ledger only moves the problem into a system nobody knows yet. The analysis includes the latest reconciliation, and cutover is not scheduled until bank, book and client ledger totals agree.
Do trust balances in Tabs3 Trust Accounting have a place in Lawmatics?
In part. A trust account with a running balance; deposits are allocated to a contact and matter. The analysis sets out which trust records have a place in Lawmatics and which are kept as an archive, and the trust cutover is rehearsed on a full trial load before the real one.
Does everything in Tabs3 Trust Accounting have a place in Lawmatics?
Most of it does on paper. Notes, custom fields and templates could not be confirmed from the two products’ own material, so those are checked in the analysis. Anything that turns out to have no place in Lawmatics is kept as a readable archive, and you see which before the move.
What has to be decided before Tabs3 Trust Accounting data is loaded into Lawmatics?
Trust ledgers are carried with mapping, so each mapping is agreed with you first. Notes, custom fields and templates are confirmed in the analysis. The firm also sets the cutover date and how much financial history comes across as live records.
Other routes
Other routes from Tabs3 Trust Accounting and into Lawmatics
Other destinations from Tabs3 Trust Accounting
Other systems that move into Lawmatics
Where to start
Before and after the move.
Choosing the system comes before a migration. Setting it up and putting AI to work come after.
Choose your systems
Technology stack selection
Decide which practice management system your firm runs, with the evidence and the cost beside it.
About four weeks for a firm of about 15 people. Fixed price, set after a free first call.
Move your data
Data migration
Your data is cleaned up before anything moves, then a trial load is checked against the old system.
Fixed price, agreed after the analysis.
Set up your new system
Implementation
Your new system set up around the way your firm works: configuration, document automation and training.
A small firm of 1 to 10 users typically takes 4 to 8 weeks. A mid-sized firm of 10 to 50 users takes 8 to 16 weeks.
Put AI to work
AI advisory and enablement
A small group of your people learn to use an approved AI tool on real work, under written rules.
Two to four weeks for a small first group. Fixed price, set after a free first call.
Tabs3 Trust Accounting and Lawmatics are the names and marks of their owners, used here only to identify the two systems.
Moving from Tabs3 Trust Accounting to Lawmatics?
Tell us what you are moving. You get a plan and a fixed price after the analysis.
We reply within one business day.