Data migration route
Tabs3 Accounts Payable to Lawmatics migration
Tabs3 Accounts Payable is a server-based accounting and billing system, and Lawmatics is a cloud CRM and intake system. Lawmatics is built around people and enquiries, so the contact list leads this move, and the table shows what else has a place.
Tabs3 Accounts PayableServer- Contacts: Carried across
- Notes: Confirmed in the analysis
- Custom fields: Confirmed in the analysis
- Templates: Confirmed in the analysis
LawmaticsCloud- Firm accounts: Kept as a readable archive
- 1 carried
- 3 to confirm
- 1 archived
What moves
What moves from Tabs3 Accounts Payable to Lawmatics
Each row is a kind of record Tabs3 Accounts Payable holds, whether Lawmatics has a place for it, and what is planned. On this route one kind of record carries across, one kind has no place in Lawmatics and is archived and three kinds are confirmed in the analysis.
| Record | What is planned | ||
|---|---|---|---|
| ContactsClients, other parties and referrers | Held in partVendors. | Has a placeContacts and companies load from CSV; relationships link further parties to a matter. | Carried across |
| NotesFile notes, matter notes and contact notes | To be confirmed | Has a placeNotes on matters, contacts and companies. | Confirmed in the analysis |
| Firm accountsGeneral ledger, office account and payables | HeldVendor invoices, cheques and EFTs, recurring entries and 1099s; posts to Tabs3 General Ledger. | No placeNo general ledger. | Kept as a readable archive |
| Custom fieldsFields and record types the firm added itself | To be confirmed | Has a placeMatter, contact and company fields. A field must exist before data is imported into it. | Confirmed in the analysis |
| TemplatesPrecedents, document templates and automation | To be confirmed | Has a place in partDocument and email templates are rebuilt with Lawmatics merge fields. | Confirmed in the analysis |
What the plans mean
- Carried across
- Lawmatics has a place for this kind of record. It is loaded there and checked against Tabs3 Accounts Payable.
- Confirmed in the analysis
- We could not confirm this from the two products’ own material, so it is checked against your data before the plan is fixed.
- Kept as a readable archive
- Lawmatics has no place for it. It is exported in a format that opens without Tabs3 Accounts Payable and handed to the firm as a read-only archive.
The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.
This kind of move
Mostly a contact list, cleaned before it lands.
Lawmatics is built for contacts, leads and the conversations around them. What Tabs3 Accounts Payable can offer it first is a list of people and companies, and sometimes a history that can be attached as notes. Whether anything else it holds has a place depends on what Lawmatics keeps besides contacts, and the table above shows that kind by kind. What has no place stays where it is or is archived.
A contact list taken from a system that was never a CRM needs work before it is useful. Names are split or joined differently, the same client appears under several spellings, and there is no record of who agreed to be contacted. The list is cleaned and de-duplicated, matched against what Lawmatics already holds, and loaded with a source tag, so the firm can tell these contacts from the ones that came through intake.
Tabs3 Accounts Payable runs on the firm’s own equipment, so the data is collected there: a copy of the database and the folders its documents sit in, taken with the firm’s IT provider or over a remote session. Lawmatics is hosted by its maker, so loading depends on the import tools and access it provides. The old machine is kept, read only, as the fall-back record.
Where the data is now
Leaving Tabs3 Accounts Payable
Payables is a small module with a narrow job, and moving it is mostly a question of where it goes. Few practice management systems pay suppliers, so the vendor list, unpaid invoices and recurring bills usually land in the firm’s accounting package. What has to be right on the day is the list of unpaid invoices and the payables balance in the ledger.
It rarely has a twin
Practice systems mostly leave supplier bills to Xero, QuickBooks or a similar package. So this module’s data usually goes to a different destination from the matters. The analysis names that destination, and the vendor list is set up there before unpaid invoices are loaded against it.
Unposted items
Invoices and cheques are entered first and posted to the general ledger later, by running the post programs. Anything entered but not yet posted is in payables and not in the ledger. All postings are run before the final extraction, so the unpaid invoice list and the ledger’s payables account agree.
Vendor numbers and key length
Vendors are numbered, and the firm set the key length in the module’s customisation. Other accounting packages identify suppliers by name or by their own code. The Tabs3 vendor number is kept as a reference on each supplier, so earlier payments can still be traced back.
Recurring entries
Rent, subscriptions and other regular bills are stored as recurring entries that the firm posts each period. They are not invoices yet, so they do not appear on the unpaid list. Each one is recreated as a recurring bill in the destination, with its next due date checked against the last one posted in Tabs3.
1099 totals mid-year
The module produces 1099 forms from the year’s vendor payments and can combine them with trust payees. If the move happens during a tax year, year-to-date payments per vendor are carried across as figures, so the forms can be produced from one place in January.
Where it is going
Arriving in Lawmatics
Lawmatics takes matters, contacts and companies from CSV files, and its API accepts notes, tasks, appointments, files, time entries and invoices. It is an intake and client relationship system, so a firm arriving from full practice management has to decide what it is for. People and matters load well. There is no general ledger, and years of billing history have no natural home.
Contacts and matters load separately
The import expects two spreadsheets: one for contacts or companies with no case, such as referrers and other lawyers, and one for matters. A matter import creates the matter and its primary contact together. Every matter has exactly one primary contact, so joint clients are loaded as one primary and one relationship.
Set up before loading
Owner, stage, practice area, source and campaign are matched by name. A value on the spreadsheet that does not match one in Lawmatics exactly creates a new one, which is how a firm ends up with two spellings of the same practice area. Users, pipelines, practice areas and marketing sources are set up first, and custom fields must exist before data is loaded into them.
Statuses and matter numbers
Each imported matter must be PNC (potential new client), Hired or Lost, with open and closed handled as sub-statuses the firm creates. The case number is a system field assigned by an auto-numbering pattern and cannot be edited by hand afterwards. Whether old matter numbers can be loaded into it, or belong in a custom field, is tested in the trial load.
Duplicates are matched by email
With Match Contacts by Email switched on, a contact whose email already exists is skipped or updated, never doubled. Names and phone numbers are not checked. Matters are not deduplicated at all, so two rows with one email create two matters on one contact. Clean-up therefore happens in the spreadsheet, and automations are switched off for every load.
What has no place
There is no general ledger. The Time & Billing module holds time entries, expenses, invoices and a trust account with a running balance per matter, and past invoices are entered as already sent and then marked paid. A firm that needs its full accounting history keeps the old system read only or carries the books in an accounting package.
How NewLaw runs it
Four steps, in this order.
Nothing financial lands in Lawmatics on this route, which makes it repeatable: a load can be run again until it is right.
Analysis
We read what Tabs3 Accounts Payable holds and how it is organised, then agree with you where each kind of record will sit in Lawmatics. Anything with no place there stays behind or is archived, and you see which before the move.
Clean-up
Duplicate clients, matters and folders are merged where they can be identified, and naming is put into one format, before anything is copied. It is not always possible to find every one, so some may carry across.
Trial load
A trial is loaded into Lawmatics and checked against Tabs3 Accounts Payable: record and file counts, the links between records, document dates, and a sample opened by your own people. Exceptions are listed for you to decide.
Cutover
There is no financial cutover on this route. After a short freeze on changes in Tabs3 Accounts Payable, a final pass over a weekend picks up what changed since the trial. Tabs3 Accounts Payable is kept read only as the fall-back record.
Fixed price, agreed after the analysis. How NewLaw moves legal data
Start
Start this migration
Tell us what is in Tabs3 Accounts Payable and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.
Step 1 of 5
What happens after you send it
- A free first call
We go through your answers with you and ask about anything they leave open.
- An analysis of what Tabs3 Accounts Payable holds
What is in it, how its records link, and where each piece would sit in Lawmatics. Anything with no place there comes across as a note or stays behind, and you see which before the move.
- A fixed price in writing
Set after the analysis, so it reflects what is in your data. You have it before any work starts.
Beyond the data
Setting up Lawmatics
Loaded data is not yet a working system. This is what NewLaw sets up in Lawmatics, beyond the migration, so that people can work in it from the first day.
In Lawmatics the design comes before the data. The pipeline stages, practice areas, custom fields and relationship types decide what the import can hold, and the forms and automations decide what the firm’s intake looks like from the first day. If a practice system sits behind it, the field mapping between the two is part of the same job.
Set-up decisions in Lawmatics
- Pipelines and stages for intake and for open matters
- Practice areas, sub-statuses, relationship types and the matter numbering pattern
- Custom fields on matters, contacts and companies
- Intake forms, booking links and e-signature document templates
- Follow-up automations, with marketing sources and campaigns
- Mail and calendar sync, user roles and practice system integration
Questions
Tabs3 Accounts Payable to Lawmatics: what firms ask
Do paid invoices need to come across?
Usually not as transactions. Paid supplier invoices are already reflected in the ledger balances. Firms keep the paid history readable in Tabs3 and carry over open invoices, the vendor list and the current year’s payment totals. If the accountant wants prior-year detail in the new package, that is agreed during the analysis.
Where do client costs paid through payables go?
A supplier invoice for a client’s matter is both a payable and a cost to recover. In the new set-up the supplier side goes to the accounting package and the recoverable cost goes to the matter as an unbilled disbursement. Open items are checked on both sides, so none is paid twice or left unbilled.
Can payables move before the rest of Tabs3?
It can, because suppliers do not depend on the matter data. Where the module is integrated with Tabs3 General Ledger, though, every invoice and cheque posts there. If the ledger is moving to a new package, payables moves with it at the same period end, or someone posts by hand in between.
Do contacts from Tabs3 Accounts Payable arrive in Lawmatics without duplicates?
Lawmatics has a place for contacts. Contacts and companies load from CSV; relationships link further parties to a matter. Duplicates are merged in Tabs3 Accounts Payable before extraction where they can be identified, and the list is matched against contacts already in Lawmatics. It is not always possible to find every one, so some may carry across.
What happens to records Lawmatics has no place for?
On this route that is the firm’s accounts. They are exported from Tabs3 Accounts Payable in formats that open without it, spreadsheets and PDFs, and handed to the firm as a read-only archive. You see the list before the move.
What has to be decided before Tabs3 Accounts Payable data is loaded into Lawmatics?
Notes, custom fields and templates are confirmed in the analysis. The firm also decides which closed matters and how many versions of a document are in scope.
Other routes
Other routes from Tabs3 Accounts Payable and into Lawmatics
Other destinations from Tabs3 Accounts Payable
Other systems that move into Lawmatics
Where to start
Before and after the move.
Choosing the system comes before a migration. Setting it up and putting AI to work come after.
Choose your systems
Technology stack selection
Decide which practice management system your firm runs, with the evidence and the cost beside it.
About four weeks for a firm of about 15 people. Fixed price, set after a free first call.
Move your data
Data migration
Your data is cleaned up before anything moves, then a trial load is checked against the old system.
Fixed price, agreed after the analysis.
Set up your new system
Implementation
Your new system set up around the way your firm works: configuration, document automation and training.
A small firm of 1 to 10 users typically takes 4 to 8 weeks. A mid-sized firm of 10 to 50 users takes 8 to 16 weeks.
Put AI to work
AI advisory and enablement
A small group of your people learn to use an approved AI tool on real work, under written rules.
Two to four weeks for a small first group. Fixed price, set after a free first call.
Tabs3 Accounts Payable and Lawmatics are the names and marks of their owners, used here only to identify the two systems.
Moving from Tabs3 Accounts Payable to Lawmatics?
Tell us what you are moving. You get a plan and a fixed price after the analysis.
We reply within one business day.