Skip to content
NEWLAW.COM
+61 1300 495 281
Let’s talk

Data migration route

Tabs3 Billing to SmartAdvocate migration

Tabs3 Billing is a server-based accounting and billing system, and SmartAdvocate is a cloud case management system for personal injury work. Only part of what Tabs3 Billing holds has a place in a case file: clients and jobs move, and the table shows how much of the billing side does.

FromTabs3 BillingServer
  1. Matters: Carried across
  2. Contacts: Carried across
  3. Time and expenses: Carried across
  4. Billing: Carried with mapping
  5. Templates: Carried with mapping
  6. Notes: Confirmed in the analysis
  7. Trust money: Confirmed in the analysis
  8. Custom fields: Confirmed in the analysis
ToSmartAdvocateCloud
  • 3 carried
  • 2 mapped
  • 3 to confirm
What the two products hold. The analysis confirms it field by field.

What moves

What moves from Tabs3 Billing to SmartAdvocate

Each row is a kind of record Tabs3 Billing holds, whether SmartAdvocate has a place for it, and what is planned. On this route three kinds of record carry across, two kinds need mapping and three kinds are confirmed in the analysis.

Records in Tabs3 Billing and their place in SmartAdvocate
RecordIn Tabs3 BillingIn SmartAdvocateWhat is planned
MattersMatters or cases, with their numbers, types, parties and statusHeldEach matter is a Client ID; the digits after the decimal point are the matter.Has a placeCases by case type, with master and member relationships.Carried across
ContactsClients, other parties and referrersHeld in partClient names and addresses; fuller contact records are in PracticeMaster.Has a placeCarried across
NotesFile notes, matter notes and contact notesTo be confirmedHas a placeConfirmed in the analysis
Time and expensesTime and expense entries, billed and unbilledHeldFees with hours worked and hours to bill, plus costs.Has a placeTracked time entries.Carried across
BillingInvoices, payments and debtor balancesHeldDraft and final statements, payments and a client ledger.Has a place in partInvoices for hourly matters. Past invoices are scoped in the analysis.Carried with mapping
Trust moneyTrust or client account ledgers and balancesHeld in partClient funds for retainers; trust ledgers are in the Trust Accounting module.To be confirmedConfirmed in the analysis
Custom fieldsFields and record types the firm added itselfTo be confirmedHas a place in partConfirmed in the analysis for each field with no standard home.Confirmed in the analysis
TemplatesPrecedents, document templates and automationHeldStatement layouts built in the Statement Designer.Has a place in partTemplates are rebuilt with SmartAdvocate merge codes.Carried with mapping

What the plans mean

Carried across
SmartAdvocate has a place for this kind of record. It is loaded there and checked against Tabs3 Billing.
Carried with mapping
SmartAdvocate holds this differently, or in part. Each field or value is matched to its place before loading, and you see the mapping first.
Confirmed in the analysis
We could not confirm this from the two products’ own material, so it is checked against your data before the plan is fixed.

The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.

This kind of move

Clients and jobs move. The books stay books.

An accounting or billing system and a case management system overlap less than firms expect. Tabs3 Billing knows clients, jobs, time and invoices. SmartAdvocate knows cases, parties, documents and deadlines. The client list moves well, and jobs can seed the case list. Time and invoice history has a place only where the case system has a billing side, and the table above shows whether this one does. A general ledger does not belong in a case system.

So the plan has two halves. Records with a place in SmartAdvocate are loaded and checked there. The rest is exported from Tabs3 Billing as reports and ledgers that open without it, and the firm decides where its accounts run from then on. If Tabs3 Billing is staying as the accounting system, nothing financial needs to move at all, and the job is to line up client and case numbers so the two can be reconciled.

Tabs3 Billing runs on the firm’s own equipment, so the data is collected there: a copy of the database and the folders its documents sit in, taken with the firm’s IT provider or over a remote session. SmartAdvocate is hosted by its maker, so loading depends on the import tools and access it provides. The old machine is kept, read only, as the fall-back record.

Where the data is now

Billing is where a Tabs3 firm’s money history sits. A move takes unbilled fees and costs, open statements, payments, client funds and the receivable ledger, and agrees each to a Tabs3 report at a statement cut-off. The archive of billed transactions is large and is handled as its own decision. Trust and the general ledger are other modules and move alongside.

  1. Work in process and archive

    Updating a final statement moves its fees, costs and payments out of the working files into archive files named T3ARCH. So unbilled work is in one place and billed history in another. Unbilled items are loaded as unbilled. The archive is loaded as history only where the destination can hold billed entries without billing them again.

  2. Statements can be undone

    Tabs3 can undo an updated statement, which moves its transactions back from the archive to work in process. Before the final extraction, the firm confirms that no statements are waiting to be undone or run again. A statement reversed after the data is taken would leave the two systems disagreeing about what has been billed.

  3. Client funds are not trust

    The client funds feature tracks non-refundable retainers and similar money kept in the firm’s general account, apart from the receivable balance. It is a different thing from the Trust Accounting module. Each client funds balance is mapped on purpose, usually to a retainer or credit on the matter, and not to the trust ledger.

  4. Courtesy discounts change history

    When a client is billed with a courtesy discount, each archived fee is reduced by its share of the discount. The archive therefore shows fees net of discount, not as first recorded. History loaded elsewhere is compared with Tabs3 on that basis, or the totals look wrong when they are not.

  5. Deleted clients take history

    Deleting a client in Tabs3 deletes its archived transactions too. A firm that tidied its client list years ago may hold less history than it expects. The analysis reports the earliest transaction date for each client, so nobody plans around records that are no longer there.

More about moving off Tabs3 Billing

Where it is going

SmartAdvocate keeps injury detail in structured fields and screens, so mapping counts for more than usual: the more precisely the old data is placed, the more of those screens are filled on the first day. Parties, incidents, insurers, providers and bills are loaded to their own screens, and the vendor’s implementation team runs conversions into it.

  1. Map to fields, not notes

    The case summary, dashboards and settlement screen read from structured fields. Injury details, insurance limits and provider bills dumped into a note leave those screens empty. The mapping takes each old field to its SmartAdvocate counterpart, and only what truly has no counterpart is loaded as a note.

  2. Case types and statuses

    Cases are loaded against case types and statuses that drive WorkPlans and reports. These are agreed with the firm before the trial load, and old statuses are translated to the new list. A status with no match is not guessed at. It is listed, and someone who knows the files decides.

  3. Document categories

    Documents are searched by category, subcategory, sender, recipient and date as well as by folder. The old system’s folders are translated into categories on the way in. Files that arrive uncategorised can still be found by description, but they fall outside the category views staff are trained to use.

  4. Working with the vendor’s conversion

    SmartAdvocate’s implementation team converts client data into the system and trains staff through its own classes. The firm’s side of that is supplying a clean source, checking the converted cases against the old system, and deciding what to do with the exceptions. Independent help is used on those tasks.

  5. Choosing Server or Cloud

    The firm decides before loading whether it will run the Server edition on its own Windows server or use the hosted Cloud edition. Either way the data load is the same. What differs is who looks after backups, updates and remote access afterwards, and that is settled with the firm’s IT provider.

More about moving into SmartAdvocate

How NewLaw runs it

Four steps, in this order.

Financial records move on this route, so the balances are rehearsed before the real cutover. The maker of SmartAdvocate says that it, or its partners, load firms into the product. Where the firm uses that service, NewLaw’s part is the work around it: the analysis, the clean-up in Tabs3 Billing and checking each trial against Tabs3 Billing.

  1. Analysis

    We read what Tabs3 Billing holds and how its records link, then agree with you, field by field, where each piece will sit in SmartAdvocate. Anything with no place there comes across as a note or stays behind, and you see which before the move.

  2. Clean-up

    Duplicate contacts and matters are merged where they can be identified, and inconsistent entries are put into one format, in Tabs3 Billing, before extraction. It is not always possible to find every one, so some may carry across.

  3. Trial load

    The data is loaded into SmartAdvocate as a trial and checked against Tabs3 Billing: record counts, financial totals, the links between records, document dates. Exceptions are listed for you to decide.

  4. Cutover

    Changes in Tabs3 Billing are frozen for an agreed window, the data is collected a final time and SmartAdvocate goes live over a weekend. The financial cutover is rehearsed on a full trial load first, so that opening balances agree with the reports in Tabs3 Billing as at the cutover date. Tabs3 Billing is kept read only as the fall-back record.

Fixed price, agreed after the analysis. How NewLaw moves legal data

Start

Start this migration

Tell us what is in Tabs3 Billing and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.

Step 1 of 5

Step 1 of 5: Start with the route

Moving fromTabs3 Billing
Moving toSmartAdvocate

The route comes from this page. Four short steps follow. Nothing you send commits your firm to anything.

What happens after you send it

  1. A free first call

    We go through your answers with you and ask about anything they leave open.

  2. An analysis of what Tabs3 Billing holds

    What is in it, how its records link, and where each piece would sit in SmartAdvocate. Anything with no place there comes across as a note or stays behind, and you see which before the move.

  3. A fixed price in writing

    Set after the analysis, so it reflects what is in your data. You have it before any work starts.

Beyond the data

Setting up SmartAdvocate

Loaded data is not yet a working system. The maker of SmartAdvocate runs or arranges the set-up of its product, so this is what has to be decided and put in place in SmartAdvocate, whoever does the work, before people rely on it from the first day.

Setting up SmartAdvocate is a matter of deciding how much of its detail the firm will use from the start. Case types, statuses and WorkPlans come first because they drive everything else. Templates follow. The vendor trains staff through its own classes, and the decisions below are best made before the first of those.

Set-up decisions in SmartAdvocate

  • Choose the Server or Cloud edition with IT
  • Define case types, statuses and staff roles
  • Build WorkPlans and Automated Procedures for each case type
  • Convert letters and forms into templates with merge codes
  • Install the Outlook plugin and agree email filing habits
  • Set up intake screens, lead sources and dashboards

Questions

Tabs3 Billing to SmartAdvocate: what firms ask

Can billed fee history be loaded, or only balances?

Open statements and their balances are loaded, because the firm still has to collect them. Whether every billed fee line from the archive comes across depends on the destination: some accept billed time as history, others only take invoice totals. Where detail cannot be loaded, the archive stays readable in Tabs3, which is kept read only.

What about our statement templates?

Statement layouts are built in the Tabs3 Statement Designer and do not open in another product. The firm picks the layouts it still uses, and those are rebuilt as invoice templates in the new system. A side-by-side print of one real client’s bill from each system is the test.

Do timekeeper rates and billing categories move?

Timekeepers, rate tables and transaction codes are extracted as lists and set up in the destination before any time is loaded, because every fee entry refers to them. Client and matter rate exceptions are loaded with the matter. Codes nobody has used in years are left out by agreement.

Do trust balances in Tabs3 Billing have a place in SmartAdvocate?

That is confirmed in the analysis. We could not establish it from the two products’ own material, so it is checked against your data in Tabs3 Billing before the plan is fixed. If SmartAdvocate turns out to have no place for trust ledgers, they are kept as a readable archive and the firm decides where trust accounting runs.

Does everything in Tabs3 Billing have a place in SmartAdvocate?

Most of it does on paper. Notes, trust ledgers and custom fields could not be confirmed from the two products’ own material, so those are checked in the analysis. Anything that turns out to have no place in SmartAdvocate is kept as a readable archive, and you see which before the move.

What has to be decided before Tabs3 Billing data is loaded into SmartAdvocate?

Billing records and templates are carried with mapping, so each mapping is agreed with you first. Notes, trust ledgers and custom fields are confirmed in the analysis. The firm also sets the cutover date and how much financial history comes across as live records.

Where to start

Before and after the move.

Choosing the system comes before a migration. Setting it up and putting AI to work come after.

How we do itDiscovery to rollout, step by step

Tabs3 Billing and SmartAdvocate are the names and marks of their owners, used here only to identify the two systems.

Moving from Tabs3 Billing to SmartAdvocate?

Tell us what you are moving. You get a plan and a fixed price after the analysis.

We reply within one business day.