Moving off a system
Migrating from Tabs3 Billing
Time and billing program at the centre of the Tabs3 suite, holding fees, costs, payments, statements and each client’s receivable ledger. This page sets out what Tabs3 Billing holds, what moving off it involves and where its records can go.
Where it can go
Routes from Tabs3 Billing
Each route has a page of its own: what moves, what has no place in the destination and how the move is run.
Practice management systems
Actionstep6 of 8 kinds of record have a place
Centerbase6 of 8 kinds of record have a place
Clio Manage6 of 8 kinds of record have a place
MyCase6 of 8 kinds of record have a place
Rocket Matter6 of 8 kinds of record have a place
SimpleLaw6 of 8 kinds of record have a place
Smokeball6 of 8 kinds of record have a place
SurePoint Finance Enterprise5 of 8 kinds of record have a place
Case management systems
Document management systems
Accounting and billing systems
CRM and intake systems
File storage
Box1 of 8 kinds of record has a place
Dropbox1 of 8 kinds of record has a place
Google Drive1 of 8 kinds of record has a place
OneDrive1 of 8 kinds of record has a place
Server drives1 of 8 kinds of record has a place
SharePoint3 of 8 kinds of record have a place
Sync.com1 of 8 kinds of record has a place
What it holds
The records Tabs3 Billing keeps
Fourteen kinds of record matter to a move. Tabs3 Billing keeps six of them, two in part, and two could not be confirmed from its maker’s own material.
- MattersYesEach matter is a Client ID; the digits after the decimal point are the matter.
- ContactsIn partClient names and addresses; fuller contact records are in PracticeMaster.
- DocumentsNoDocument links are a PracticeMaster function.
- EmailsNoEmails saved to matters or to the store
- NotesTo be confirmedFile notes, matter notes and contact notes
- CalendarNoThe calendar is in PracticeMaster.
- TasksNoTo-dos and workflow steps assigned to people
- Time and expensesYesFees with hours worked and hours to bill, plus costs.
- BillingYesDraft and final statements, payments and a client ledger.
- Trust moneyIn partClient funds for retainers; trust ledgers are in the Trust Accounting module.
- Firm accountsNoPosts to Tabs3 General Ledger or to QuickBooks.
- Custom fieldsTo be confirmedFields and record types the firm added itself
- TemplatesYesStatement layouts built in the Statement Designer.
- IntakeNoLeads, enquiries, intake forms and pipelines
Moving off it
Leaving Tabs3 Billing
Billing is where a Tabs3 firm’s money history sits. A move takes unbilled fees and costs, open statements, payments, client funds and the receivable ledger, and agrees each to a Tabs3 report at a statement cut-off. The archive of billed transactions is large and is handled as its own decision. Trust and the general ledger are other modules and move alongside.
Work in process and archive
Updating a final statement moves its fees, costs and payments out of the working files into archive files named T3ARCH. So unbilled work is in one place and billed history in another. Unbilled items are loaded as unbilled. The archive is loaded as history only where the destination can hold billed entries without billing them again.
Statements can be undone
Tabs3 can undo an updated statement, which moves its transactions back from the archive to work in process. Before the final extraction, the firm confirms that no statements are waiting to be undone or run again. A statement reversed after the data is taken would leave the two systems disagreeing about what has been billed.
Client funds are not trust
The client funds feature tracks non-refundable retainers and similar money kept in the firm’s general account, apart from the receivable balance. It is a different thing from the Trust Accounting module. Each client funds balance is mapped on purpose, usually to a retainer or credit on the matter, and not to the trust ledger.
Courtesy discounts change history
When a client is billed with a courtesy discount, each archived fee is reduced by its share of the discount. The archive therefore shows fees net of discount, not as first recorded. History loaded elsewhere is compared with Tabs3 on that basis, or the totals look wrong when they are not.
Deleted clients take history
Deleting a client in Tabs3 deletes its archived transactions too. A firm that tidied its client list years ago may hold less history than it expects. The analysis reports the earliest transaction date for each client, so nobody plans around records that are no longer there.
The system
What Tabs3 Billing is
Tabs3 Billing is the time and billing program in the Tabs3 suite from Tabs3 Software. It records fees, costs and payments, produces draft and final statements, and keeps each client’s receivable ledger. Hourly, flat fee, contingency, retainer, split and task-based billing are all supported, and firms use it with or without the suite’s other modules.
It runs on the firm’s server or in Tabs3 Cloud. Records are filed under a Client ID in which the matter follows a decimal point. Once a final statement is updated, the transactions on it move from work in process to an archive file. The program links to Tabs3 General Ledger or to QuickBooks for the firm’s books.
- Kind
- Accounting and billing
- Runs as
- On the firm’s server or a hosted server
- Made by
- Tabs3 Software (part of ProfitSolv)
- Mainly used in
- The United States
- Also known as
- TABS3 Billing, Tabs3 Billing Software
How NewLaw runs it
Four steps, in this order.
Trust money moves on most routes, so the trust cutover gets a rehearsal of its own.
Analysis
We read what Tabs3 Billing holds and how its records link, then agree with you, field by field, where each piece will sit in the new system. Anything with no place there comes across as a note or stays behind, and you see which before the move.
Clean-up
Duplicate contacts and matters are merged where they can be identified, and inconsistent entries are put into one format, in Tabs3 Billing, before extraction. It is not always possible to find every one, so some may carry across.
Trial load
The data is loaded into the new system as a trial and checked against Tabs3 Billing: record counts, trust and debtor totals, the links between records, document dates. Exceptions are listed for you to decide.
Cutover
Changes in Tabs3 Billing are frozen for an agreed window, the data is collected a final time and the new system goes live over a weekend. The trust and financial cutover is rehearsed on a full trial load first, because it cannot be re-run the way a document load can. Tabs3 Billing is kept read only as the fall-back record.
Fixed price, agreed after the analysis. How NewLaw moves legal data
Start
Start this migration
Choose where the Tabs3 Billing data is going, or tell us you have not decided. The first step is the analysis, and the price is fixed once it is done.
Step 1 of 5
What happens after you send it
- A free first call
We go through your answers with you and ask about anything they leave open.
- An analysis of what Tabs3 Billing holds
What is in it, how its records link, and where each piece would sit in the new system. Anything with no place there comes across as a note or stays behind, and you see which before the move.
- A fixed price in writing
Set after the analysis, so it reflects what is in your data. You have it before any work starts.
After the move
Setting up the system you move to
A migration ends with data in a new system. Whether people can work in it on the first day depends on how that system was set up: matter types, templates, billing, permissions. NewLaw does that work as well, and each destination’s page says what its set-up involves.
Set-up, by destination
- Actionstep
- Box
- Centerbase
- Clio Manage
- Dropbox
- Filevine
- Full data export
- Gladiate
- Google Drive
- iManage Cloud
- Lawmatics
- LexWorkplace
- Litify
- Microsoft SQL Server
- MyCase
- Neos
- NetDocuments
- OneDrive
- QuickBooks Online
- Rocket Matter
- Server drives
- SharePoint
- SimpleLaw
- SmartAdvocate
- Smokeball
- Soluno
- SQLite
- SurePoint Finance Enterprise
- Sync.com
Questions
Moving off Tabs3 Billing: what firms ask
Can billed fee history be loaded, or only balances?
Open statements and their balances are loaded, because the firm still has to collect them. Whether every billed fee line from the archive comes across depends on the destination: some accept billed time as history, others only take invoice totals. Where detail cannot be loaded, the archive stays readable in Tabs3, which is kept read only.
What about our statement templates?
Statement layouts are built in the Tabs3 Statement Designer and do not open in another product. The firm picks the layouts it still uses, and those are rebuilt as invoice templates in the new system. A side-by-side print of one real client’s bill from each system is the test.
Do timekeeper rates and billing categories move?
Timekeepers, rate tables and transaction codes are extracted as lists and set up in the destination before any time is loaded, because every fee entry refers to them. Client and matter rate exceptions are loaded with the matter. Codes nobody has used in years are left out by agreement.
Where to start
Still deciding where to move?
Choose the system before you plan the move, and see where AI fits once your data is in it.
Choose your systems
Technology stack selection
Decide which practice management system your firm runs, with the evidence and the cost beside it.
About four weeks for a firm of about 15 people. Fixed price, set after a free first call.
Move your data
Data migration
Your data is cleaned up before anything moves, then a trial load is checked against the old system.
Fixed price, agreed after the analysis.
Set up your new system
Implementation
Your new system set up around the way your firm works: configuration, document automation and training.
A small firm of 1 to 10 users typically takes 4 to 8 weeks. A mid-sized firm of 10 to 50 users takes 8 to 16 weeks.
Put AI to work
AI advisory and enablement
A small group of your people learn to use an approved AI tool on real work, under written rules.
Two to four weeks for a small first group. Fixed price, set after a free first call.
Tabs3 Billing and the other product names and logos on this page belong to their owners and are used only to identify the systems.
Moving off Tabs3 Billing?
Tell us what you are moving. You get a plan and a fixed price after the analysis.
We reply within one business day.