Data migration route
Tabs3 Accounts Payable to Sync.com migration
Tabs3 Accounts Payable is a server-based accounting and billing system, and Sync.com is cloud file storage. What moves is the files, plus a readable export of everything else the old system holds.
Tabs3 Accounts PayableServer- Notes: Confirmed in the analysis
- Custom fields: Confirmed in the analysis
- Templates: Confirmed in the analysis
Sync.comCloud- Contacts: Kept as a readable archive
- Firm accounts: Kept as a readable archive
- 3 to confirm
- 2 archived
What moves
What moves from Tabs3 Accounts Payable to Sync.com
Each row is a kind of record Tabs3 Accounts Payable holds, whether Sync.com has a place for it, and what is planned. On this route two kinds have no place in Sync.com and are archived and three kinds are confirmed in the analysis.
| Record | What is planned | ||
|---|---|---|---|
| ContactsClients, other parties and referrers | Held in partVendors. | No place | Kept as a readable archive |
| NotesFile notes, matter notes and contact notes | To be confirmed | Has a place in partOnly as a document written out to the matter’s folder. | Confirmed in the analysis |
| Firm accountsGeneral ledger, office account and payables | HeldVendor invoices, cheques and EFTs, recurring entries and 1099s; posts to Tabs3 General Ledger. | No place | Kept as a readable archive |
| Custom fieldsFields and record types the firm added itself | To be confirmed | No place | Confirmed in the analysis |
| TemplatesPrecedents, document templates and automation | To be confirmed | Has a place in partPrecedents load as ordinary files. | Confirmed in the analysis |
What the plans mean
- Confirmed in the analysis
- We could not confirm this from the two products’ own material, so it is checked against your data before the plan is fixed.
- Kept as a readable archive
- Sync.com has no place for it. It is exported in a format that opens without Tabs3 Accounts Payable and handed to the firm as a read-only archive.
The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.
This kind of move
An export the firm can open without the system.
Sync.com holds files, and most of what Tabs3 Accounts Payable holds is records. This route is therefore an export job. Each kind of record is written out in a format that opens without the system it came from: lists as spreadsheets, statements and invoices as PDFs, attachments as the files they were. The export is laid out in folders that make sense to someone who never used Tabs3 Accounts Payable, by client or by year, with a short index file saying what is where.
Firms do this when a subscription is ending, when a system is being retired, or to meet a retention rule. The test of the result is whether a question can still be answered from it years later: what was this client invoiced, who signed this agreement and when. So the trial export is checked by asking those questions of it. Totals are agreed to the system’s own reports, and access to the folder in Sync.com is limited before the export is copied in.
Tabs3 Accounts Payable runs on the firm’s own equipment, so the data is collected there: a copy of the database and the folders its documents sit in, taken with the firm’s IT provider or over a remote session. Sync.com is hosted by its maker, so loading depends on the import tools and access it provides. The old machine is kept, read only, as the fall-back record.
Where the data is now
Leaving Tabs3 Accounts Payable
Payables is a small module with a narrow job, and moving it is mostly a question of where it goes. Few practice management systems pay suppliers, so the vendor list, unpaid invoices and recurring bills usually land in the firm’s accounting package. What has to be right on the day is the list of unpaid invoices and the payables balance in the ledger.
It rarely has a twin
Practice systems mostly leave supplier bills to Xero, QuickBooks or a similar package. So this module’s data usually goes to a different destination from the matters. The analysis names that destination, and the vendor list is set up there before unpaid invoices are loaded against it.
Unposted items
Invoices and cheques are entered first and posted to the general ledger later, by running the post programs. Anything entered but not yet posted is in payables and not in the ledger. All postings are run before the final extraction, so the unpaid invoice list and the ledger’s payables account agree.
Vendor numbers and key length
Vendors are numbered, and the firm set the key length in the module’s customisation. Other accounting packages identify suppliers by name or by their own code. The Tabs3 vendor number is kept as a reference on each supplier, so earlier payments can still be traced back.
Recurring entries
Rent, subscriptions and other regular bills are stored as recurring entries that the firm posts each period. They are not invoices yet, so they do not appear on the unpaid list. Each one is recreated as a recurring bill in the destination, with its next due date checked against the last one posted in Tabs3.
1099 totals mid-year
The module produces 1099 forms from the year’s vendor payments and can combine them with trust payees. If the move happens during a tax year, year-to-date payments per vendor are carried across as figures, so the forms can be produced from one place in January.
Where it is going
Arriving in Sync.com
A firm that moves its files to Sync is usually doing so for confidentiality, and the load has to respect how the service is built to deliver it. Files are encrypted before they leave the computer. Nobody at Sync can look inside the account to confirm what arrived, so the checking is done from the firm’s side, against the list of what was sent.
Files or Vault
Open matters belong in Files, where they sync to the people working on them. Closed matters can go to Vault, which holds them in the cloud without putting a copy on every laptop. The firm supplies its open and closed matter lists so each folder is sent to the right side.
A 248 character path limit
Sync sets a maximum path length of 248 characters to stay compatible between Windows and Mac, and its apps skip anything longer. That is tighter than most systems a firm will be coming from. Folder names are shortened in the plan, and Sync’s own guidance favours a tree only a few levels deep.
What the apps leave out
The desktop apps do not upload shortcut files, temporary Office files or names containing a slash, and they warn against several other characters on Windows. A copy to Vault produces a transfer report listing what was skipped. That report is reconciled against the source file list after every load.
Permissions come from the top folder
Sharing is set on a folder and flows down to all of its contents. A matter that needs different access from the rest of a client’s work cannot simply sit one level down with tighter settings. It becomes its own shared folder, and those exceptions are identified before the tree is built.
Shared folders count against storage
A shared folder is added to each member’s account and normally counts towards their quota, and it syncs to their computer as a real folder. Sharing the whole client tree with every person can fill both. Shares are sized to teams, and the allowance needed per user is worked out from the document volumes.
How NewLaw runs it
Four steps, in this order.
Nothing financial lands in Sync.com on this route, which makes it repeatable: a load can be run again until it is right.
Analysis
We read what Tabs3 Accounts Payable holds and how it is organised, then agree with you where each kind of record will sit in Sync.com. Anything with no place there stays behind or is archived, and you see which before the move.
Clean-up
Duplicate clients, matters and folders are merged where they can be identified, and naming is put into one format, before anything is copied. It is not always possible to find every one, so some may carry across.
Trial load
A trial is loaded into Sync.com and checked against Tabs3 Accounts Payable: record and file counts, the links between records, document dates, and a sample opened by your own people. Exceptions are listed for you to decide.
Cutover
There is no financial cutover on this route. After a short freeze on changes in Tabs3 Accounts Payable, a final pass over a weekend picks up what changed since the trial. Tabs3 Accounts Payable is kept read only as the fall-back record.
Fixed price, agreed after the analysis. How NewLaw moves legal data
Start
Start this migration
Tell us what is in Tabs3 Accounts Payable and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.
Step 1 of 5
What happens after you send it
- A free first call
We go through your answers with you and ask about anything they leave open.
- An analysis of what Tabs3 Accounts Payable holds
What is in it, how its records link, and where each piece would sit in Sync.com. Anything with no place there comes across as a note or stays behind, and you see which before the move.
- A fixed price in writing
Set after the analysis, so it reflects what is in your data. You have it before any work starts.
Beyond the data
Structure, permissions and handover
Sync.com is storage, not an application, so there is no product to configure. What is agreed and set up is the folder structure, who can open what, and how the result is handed to the firm.
A Sync set-up comes down to accounts and shares. A team plan gives an administrator control over users, two-factor authentication and password resets, which matters more than usual in a service the provider says it cannot see into. The shared folders are then created to match the firm’s teams and its restricted matters.
What is agreed and set up
- Administrator account and a user for each staff member
- Two-factor authentication enforced across the firm
- Team shared folders with view or edit permission per person
- Which matters live in Files and which in Vault
- Rules for client links: passwords, expiry dates, upload rights
- Desktop app installed, with a filing guide for new matters
Questions
Tabs3 Accounts Payable to Sync.com: what firms ask
Do paid invoices need to come across?
Usually not as transactions. Paid supplier invoices are already reflected in the ledger balances. Firms keep the paid history readable in Tabs3 and carry over open invoices, the vendor list and the current year’s payment totals. If the accountant wants prior-year detail in the new package, that is agreed during the analysis.
Where do client costs paid through payables go?
A supplier invoice for a client’s matter is both a payable and a cost to recover. In the new set-up the supplier side goes to the accounting package and the recoverable cost goes to the matter as an unbilled disbursement. Open items are checked on both sides, so none is paid twice or left unbilled.
Can payables move before the rest of Tabs3?
It can, because suppliers do not depend on the matter data. Where the module is integrated with Tabs3 General Ledger, though, every invoice and cheque posts there. If the ledger is moving to a new package, payables moves with it at the same period end, or someone posts by hand in between.
Do contacts from Tabs3 Accounts Payable arrive in Sync.com without duplicates?
Sync.com has no place for contacts. The contact list from Tabs3 Accounts Payable is exported as a spreadsheet and kept as a readable archive.
What happens to records Sync.com has no place for?
On this route that is contacts and the firm’s accounts. They are exported from Tabs3 Accounts Payable in formats that open without it, spreadsheets and PDFs, and handed to the firm as a read-only archive. You see the list before the move.
What has to be decided before Tabs3 Accounts Payable data is loaded into Sync.com?
Notes, custom fields and templates are confirmed in the analysis. The firm also decides which closed matters and how many versions of a document are in scope.
Other routes
Other routes from Tabs3 Accounts Payable and into Sync.com
Other destinations from Tabs3 Accounts Payable
Other systems that move into Sync.com
Where to start
Before and after the move.
Choosing the system comes before a migration. Setting it up and putting AI to work come after.
Choose your systems
Technology stack selection
Decide which practice management system your firm runs, with the evidence and the cost beside it.
About four weeks for a firm of about 15 people. Fixed price, set after a free first call.
Move your data
Data migration
Your data is cleaned up before anything moves, then a trial load is checked against the old system.
Fixed price, agreed after the analysis.
Set up your new system
Implementation
Your new system set up around the way your firm works: configuration, document automation and training.
A small firm of 1 to 10 users typically takes 4 to 8 weeks. A mid-sized firm of 10 to 50 users takes 8 to 16 weeks.
Put AI to work
AI advisory and enablement
A small group of your people learn to use an approved AI tool on real work, under written rules.
Two to four weeks for a small first group. Fixed price, set after a free first call.
Tabs3 Accounts Payable and Sync.com are the names and marks of their owners, used here only to identify the two systems.
Moving from Tabs3 Accounts Payable to Sync.com?
Tell us what you are moving. You get a plan and a fixed price after the analysis.
We reply within one business day.