Data migration route
Tabs3 Accounts Payable to SharePoint migration
Tabs3 Accounts Payable is a server-based accounting and billing system, and SharePoint is cloud file storage. What moves is the files, plus a readable export of everything else the old system holds.
Tabs3 Accounts PayableServer- Contacts: Carried with mapping
- Notes: Confirmed in the analysis
- Custom fields: Confirmed in the analysis
- Templates: Confirmed in the analysis
SharePointCloud- Firm accounts: Kept as a readable archive
- 1 mapped
- 3 to confirm
- 1 archived
What moves
What moves from Tabs3 Accounts Payable to SharePoint
Each row is a kind of record Tabs3 Accounts Payable holds, whether SharePoint has a place for it, and what is planned. On this route one kind needs mapping, one kind has no place in SharePoint and is archived and three kinds are confirmed in the analysis.
| Record | What is planned | ||
|---|---|---|---|
| ContactsClients, other parties and referrers | Held in partVendors. | Has a place in partOnly as rows in a list built for the purpose. | Carried with mapping |
| NotesFile notes, matter notes and contact notes | To be confirmed | Has a place in partAs documents, or as rows in a notes list if one is built. | Confirmed in the analysis |
| Firm accountsGeneral ledger, office account and payables | HeldVendor invoices, cheques and EFTs, recurring entries and 1099s; posts to Tabs3 General Ledger. | No place | Kept as a readable archive |
| Custom fieldsFields and record types the firm added itself | To be confirmed | Has a placeColumns and content types on libraries and lists. | Confirmed in the analysis |
| TemplatesPrecedents, document templates and automation | To be confirmed | Has a place in partPrecedents as files; templates can be offered from a library. | Confirmed in the analysis |
What the plans mean
- Carried with mapping
- SharePoint holds this differently, or in part. Each field or value is matched to its place before loading, and you see the mapping first.
- Confirmed in the analysis
- We could not confirm this from the two products’ own material, so it is checked against your data before the plan is fixed.
- Kept as a readable archive
- SharePoint has no place for it. It is exported in a format that opens without Tabs3 Accounts Payable and handed to the firm as a read-only archive.
The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.
This kind of move
An export the firm can open without the system.
SharePoint holds files, and most of what Tabs3 Accounts Payable holds is records. This route is therefore an export job. Each kind of record is written out in a format that opens without the system it came from: lists as spreadsheets, statements and invoices as PDFs, attachments as the files they were. The export is laid out in folders that make sense to someone who never used Tabs3 Accounts Payable, by client or by year, with a short index file saying what is where.
Firms do this when a subscription is ending, when a system is being retired, or to meet a retention rule. The test of the result is whether a question can still be answered from it years later: what was this client invoiced, who signed this agreement and when. So the trial export is checked by asking those questions of it. Totals are agreed to the system’s own reports, and access to the folder in SharePoint is limited before the export is copied in.
Tabs3 Accounts Payable runs on the firm’s own equipment, so the data is collected there: a copy of the database and the folders its documents sit in, taken with the firm’s IT provider or over a remote session. SharePoint is hosted by its maker, so loading depends on the import tools and access it provides. The old machine is kept, read only, as the fall-back record.
Where the data is now
Leaving Tabs3 Accounts Payable
Payables is a small module with a narrow job, and moving it is mostly a question of where it goes. Few practice management systems pay suppliers, so the vendor list, unpaid invoices and recurring bills usually land in the firm’s accounting package. What has to be right on the day is the list of unpaid invoices and the payables balance in the ledger.
It rarely has a twin
Practice systems mostly leave supplier bills to Xero, QuickBooks or a similar package. So this module’s data usually goes to a different destination from the matters. The analysis names that destination, and the vendor list is set up there before unpaid invoices are loaded against it.
Unposted items
Invoices and cheques are entered first and posted to the general ledger later, by running the post programs. Anything entered but not yet posted is in payables and not in the ledger. All postings are run before the final extraction, so the unpaid invoice list and the ledger’s payables account agree.
Vendor numbers and key length
Vendors are numbered, and the firm set the key length in the module’s customisation. Other accounting packages identify suppliers by name or by their own code. The Tabs3 vendor number is kept as a reference on each supplier, so earlier payments can still be traced back.
Recurring entries
Rent, subscriptions and other regular bills are stored as recurring entries that the firm posts each period. They are not invoices yet, so they do not appear on the unpaid list. Each one is recreated as a recurring bill in the destination, with its next due date checked against the last one posted in Tabs3.
1099 totals mid-year
The module produces 1099 forms from the year’s vendor payments and can combine them with trust payees. If the move happens during a tax year, year-to-date payments per vendor are carried across as figures, so the forms can be produced from one place in January.
Where it is going
Arriving in SharePoint
SharePoint will take a firm’s documents in almost any arrangement, which is the difficulty. The structure has to be chosen before the load: what a client is, what a matter is, and where security is applied. Changing it afterwards means moving every file again. Most of the effort goes into that design and into the columns that describe each document.
Site, library or folder per matter
A matter can be a site, a library within a client site, or a folder in one large library. Each choice has consequences for permissions, for search and for how a new matter is opened. The firm makes that decision, and the people who open matters every day should be part of it.
Columns are built before content
If documents are to carry matter number, client, document type or author as columns, those columns and any content types exist before loading, so each file can be tagged as it arrives. Tagging hundreds of thousands of documents afterwards is a second project that seldom gets finished.
The 400 character path
SharePoint limits the full decoded path, site and library and folders and file name, to 400 characters. A deep tree copied from a server drive under a long site name can cross it. Path lengths are calculated against the planned structure, not the old one, before any file moves.
Large libraries and the view threshold
A library can hold millions of files, but a view that tries to show more than 5,000 items at once runs into the list view threshold. One flat library with a folder per matter needs indexed columns and filtered views from the start, or views begin to fail as the library fills.
Security by library, not by file
Microsoft supports up to 50,000 unique permissions in a library and recommends staying under 5,000. Restricting matters one folder at a time reaches that sooner than firms expect. Restricted work is better grouped into its own site or library, so the permission is set once.
How NewLaw runs it
Four steps, in this order.
Nothing financial lands in SharePoint on this route, which makes it repeatable: a load can be run again until it is right.
Analysis
We read what Tabs3 Accounts Payable holds and how it is organised, then agree with you where each kind of record will sit in SharePoint. Anything with no place there stays behind or is archived, and you see which before the move.
Clean-up
Duplicate clients, matters and folders are merged where they can be identified, and naming is put into one format, before anything is copied. It is not always possible to find every one, so some may carry across.
Trial load
A trial is loaded into SharePoint and checked against Tabs3 Accounts Payable: record and file counts, the links between records, document dates, and a sample opened by your own people. Exceptions are listed for you to decide.
Cutover
There is no financial cutover on this route. After a short freeze on changes in Tabs3 Accounts Payable, a final pass over a weekend picks up what changed since the trial. Tabs3 Accounts Payable is kept read only as the fall-back record.
Fixed price, agreed after the analysis. How NewLaw moves legal data
Start
Start this migration
Tell us what is in Tabs3 Accounts Payable and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.
Step 1 of 5
What happens after you send it
- A free first call
We go through your answers with you and ask about anything they leave open.
- An analysis of what Tabs3 Accounts Payable holds
What is in it, how its records link, and where each piece would sit in SharePoint. Anything with no place there comes across as a note or stays behind, and you see which before the move.
- A fixed price in writing
Set after the analysis, so it reflects what is in your data. You have it before any work starts.
Beyond the data
Structure, permissions and handover
SharePoint is storage, not an application, so there is no product to configure. What is agreed and set up is the folder structure, who can open what, and how the result is handed to the firm.
Making SharePoint work as a firm’s document store is a design and build job in its own right. The sites, libraries, columns and permission groups are created, a way of opening a new matter is put in place so the structure repeats itself, and the Outlook and Teams habits around it are agreed. Search is tested with real questions from fee earners.
What is agreed and set up
- Site and library structure for clients and matters
- Columns and content types for matter number and document type
- Permission groups, with restricted matters in their own libraries
- A repeatable way to create each new matter’s workspace
- Version history limits and retention labels for closed matters
- Views, indexed columns and search tested on loaded data
Questions
Tabs3 Accounts Payable to SharePoint: what firms ask
Do paid invoices need to come across?
Usually not as transactions. Paid supplier invoices are already reflected in the ledger balances. Firms keep the paid history readable in Tabs3 and carry over open invoices, the vendor list and the current year’s payment totals. If the accountant wants prior-year detail in the new package, that is agreed during the analysis.
Where do client costs paid through payables go?
A supplier invoice for a client’s matter is both a payable and a cost to recover. In the new set-up the supplier side goes to the accounting package and the recoverable cost goes to the matter as an unbilled disbursement. Open items are checked on both sides, so none is paid twice or left unbilled.
Can payables move before the rest of Tabs3?
It can, because suppliers do not depend on the matter data. Where the module is integrated with Tabs3 General Ledger, though, every invoice and cheque posts there. If the ledger is moving to a new package, payables moves with it at the same period end, or someone posts by hand in between.
Do contacts from Tabs3 Accounts Payable arrive in SharePoint without duplicates?
SharePoint takes contacts in part. Only as rows in a list built for the purpose. The fields that have a place there are loaded after duplicates are merged where they can be identified. The rest of each contact record is kept as a note or in the archive.
What happens to records SharePoint has no place for?
On this route that is the firm’s accounts. They are exported from Tabs3 Accounts Payable in formats that open without it, spreadsheets and PDFs, and handed to the firm as a read-only archive. You see the list before the move.
What has to be decided before Tabs3 Accounts Payable data is loaded into SharePoint?
Contacts are carried with mapping, so each mapping is agreed with you first. Notes, custom fields and templates are confirmed in the analysis. The firm also decides which closed matters and how many versions of a document are in scope.
Other routes
Other routes from Tabs3 Accounts Payable and into SharePoint
Other destinations from Tabs3 Accounts Payable
Other systems that move into SharePoint
Where to start
Before and after the move.
Choosing the system comes before a migration. Setting it up and putting AI to work come after.
Choose your systems
Technology stack selection
Decide which practice management system your firm runs, with the evidence and the cost beside it.
About four weeks for a firm of about 15 people. Fixed price, set after a free first call.
Move your data
Data migration
Your data is cleaned up before anything moves, then a trial load is checked against the old system.
Fixed price, agreed after the analysis.
Set up your new system
Implementation
Your new system set up around the way your firm works: configuration, document automation and training.
A small firm of 1 to 10 users typically takes 4 to 8 weeks. A mid-sized firm of 10 to 50 users takes 8 to 16 weeks.
Put AI to work
AI advisory and enablement
A small group of your people learn to use an approved AI tool on real work, under written rules.
Two to four weeks for a small first group. Fixed price, set after a free first call.
Tabs3 Accounts Payable and SharePoint are the names and marks of their owners, used here only to identify the two systems.
Moving from Tabs3 Accounts Payable to SharePoint?
Tell us what you are moving. You get a plan and a fixed price after the analysis.
We reply within one business day.