Data migration route
LinkedIn to Smokeball migration
LinkedIn is a cloud contacts and calendar tool, and Smokeball is a practice management system that runs on the desktop and keeps its data in its maker’s cloud. This is a narrow move: the records LinkedIn holds are matched to the people and matters in Smokeball.
LinkedInCloud- Contacts: Carried across
SmokeballDesktop and cloud- 1 carried
What moves
What moves from LinkedIn to Smokeball
Each row is a kind of record LinkedIn holds, whether Smokeball has a place for it, and what is planned. On this route one kind of record carries across.
| Record | What is planned | ||
|---|---|---|---|
| ContactsClients, other parties and referrers | Held in partA member’s own first-degree connections: name, profile URL, company, position, date connected. | Has a placeMatter roles import on the Grow and Prosper+ plans only. | Carried across |
What the plans mean
- Carried across
- Smokeball has a place for this kind of record. It is loaded there and checked against LinkedIn.
The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.
This kind of move
A narrow move, checked like a large one.
A source like LinkedIn holds one kind of record well: an address book, a calendar, a set of signed documents. None of it is organised by matter. The work is matching each contact to a contact in Smokeball, and each appointment or signed document to the matter it belongs to. Where a match cannot be made from a name, an email address or a reference, the record is listed for the firm to place by hand or leave behind.
The volume is small and the load is quick, which makes it tempting to skip the checks. They still apply. Contacts are compared with what Smokeball already holds, so the move does not create a second copy of every client. Dates are checked for time zones, a common fault in calendar data. Signed documents arrive with their completion date and, where the service provides one, the audit record as a separate file.
Both are hosted by their makers, so nothing is collected from the firm’s office. What can be taken out of LinkedIn depends on its export tools and on what its maker provides on request, and that is confirmed during the analysis, before a date is set. The subscription to LinkedIn is kept running until the checks on Smokeball are finished.
Where the data is now
Leaving LinkedIn
There is no firm-wide export from LinkedIn. Each lawyer requests an archive of their own account and receives a connections file. Those files are combined, checked against the contacts the firm already holds, and loaded as people with a company and a job title. It is a contact list and nothing more, and it is treated as one.
Each lawyer exports their own
The archive is requested from a member’s own settings, on a computer and not the mobile app, and the download link goes to that member’s primary email address and lasts 72 hours. Nobody else can request it for them. The firm collects one connections file per lawyer, and each file is labelled with whose network it is.
Email addresses are often missing
An email address is included only when the connection has chosen to let their connections download it. Many rows have a name, a company and a position, and no way to write to the person. Rows are matched to existing contacts by name and company, and the firm’s own record supplies the address.
Company and title go stale
The company and position columns show what each person’s profile said on the day of the export. People move firms. Where a contact already exists in the destination, the LinkedIn details are shown beside the firm’s own for someone to choose between, and nothing is overwritten without that choice.
Whose contact is it
A partner’s connections are their personal network, and some will not want every name visible to the whole firm. Before anything is loaded the firm decides whether these become shared firm contacts, private contacts of the lawyer, or a marketing list, and which lawyer is recorded as knowing each one.
Names in other scripts
LinkedIn’s help pages say the CSV format does not support every character, and names written in Chinese, Japanese or Hebrew script may not come through. Those rows are found by checking for blank or garbled names once the files are combined, and are corrected by hand from the profile address.
Where it is going
Arriving in Smokeball
Smokeball has a data import tool that reads spreadsheets of staff, contacts, matters, balances, unbilled time, invoices, memos, tasks and calendar events. Some of those are only available on the higher plans. Documents are brought in separately, with their folders. Before the first trial, every incoming matter is given a Smokeball matter type, since nothing else about the matter can be placed without one.
Every matter needs a type
Smokeball’s matter types are specific to an area of law and a state or jurisdiction, and each brings its own fields. The old system’s matter types are mapped to them one by one. It is worth getting right the first time: changing a matter’s type later can drop the details held in layouts the new type does not have.
The plan decides what loads
Matter roles, tags, critical dates and archive details import only on the Grow and Prosper+ plans. Memos, tasks and calendar events do not import on the Bill plan. The firm’s plan is confirmed before the mapping is written, so nobody maps the other side’s solicitor to a role that the subscription cannot hold.
Leave auto-numbering until after
Smokeball’s guidance for firms still bringing matters in is to wait before setting up automatic Internal References. Imported matters arrive with the numbers they already had. Once the load is accepted, the reference format and the counter’s starting number are set so the first new matter follows on from the last old one.
Documents arrive by folder
Importing a folder into a matter keeps its subfolders, and default folders can also be defined per matter type. The firm decides which wins where they differ: the old structure as it was, or its new standard layout with old folders mapped into it.
An opening balance per matter
Matter account balances are on the import list, along with unbilled time and expenses, invoices and billed invoice entries. Past trust transactions are not on that list. The trust position is therefore loaded as an opening balance for each matter and rehearsed on a full trial, with the transaction history kept in the old system.
How NewLaw runs it
Four steps, in this order.
Nothing financial lands in Smokeball on this route, which makes it repeatable: a load can be run again until it is right.
Analysis
We read what LinkedIn holds and how it is organised, then agree with you where each kind of record will sit in Smokeball. Anything with no place there stays behind or is archived, and you see which before the move.
Clean-up
Duplicate clients, matters and folders are merged where they can be identified, and naming is put into one format, before anything is copied. It is not always possible to find every one, so some may carry across.
Trial load
A trial is loaded into Smokeball and checked against LinkedIn: record and file counts, the links between records, document dates, and a sample opened by your own people. Exceptions are listed for you to decide.
Cutover
There is no financial cutover on this route. After a short freeze on changes in LinkedIn, a final pass over a weekend picks up what changed since the trial. LinkedIn is kept read only as the fall-back record.
Fixed price, agreed after the analysis. How NewLaw moves legal data
Start
Start this migration
Tell us what is in LinkedIn and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.
Step 1 of 5
What happens after you send it
- A free first call
We go through your answers with you and ask about anything they leave open.
- An analysis of what LinkedIn holds
What is in it, how its records link, and where each piece would sit in Smokeball. Anything with no place there comes across as a note or stays behind, and you see which before the move.
- A fixed price in writing
Set after the analysis, so it reflects what is in your data. You have it before any work starts.
Beyond the data
Setting up Smokeball
Loaded data is not yet a working system. This is what NewLaw sets up in Smokeball, beyond the migration, so that people can work in it from the first day.
A Smokeball set-up is partly on the firm’s PCs and partly in firm settings. The desktop app and its Word and Outlook add-ins go on each Windows machine. In settings, the firm chooses the matter types it will use, defines default folders for each and sets its numbering. Trust accounts and the accounting connection are configured before the first invoice is raised.
Set-up decisions in Smokeball
- Matter types in use, with default document folders for each
- Internal Reference format and the starting number for new matters
- Trust account details and the link to the accounting package
- Staff roles and permissions, including who sees billing and trust
- Firm precedents and letterhead rebuilt as Smokeball templates
- Desktop app, Word and Outlook add-ins on every PC
Questions
LinkedIn to Smokeball: what firms ask
Can the firm export all its lawyers’ connections at once?
No. LinkedIn provides each member’s own data to that member only, and lists only first-degree connections. Every lawyer runs the request from their own account and passes on the connections file. The files are then merged, and people known to several lawyers appear once with each relationship recorded.
Will LinkedIn messages come across?
The larger archive includes a messages file with dates, subjects and content. It is a member’s private correspondence and is rarely appropriate to load into a firm system. If a particular conversation matters to a file, the lawyer saves it to that matter by hand, the way they would a personal email.
Do contacts from LinkedIn arrive in Smokeball without duplicates?
Smokeball has a place for contacts. Matter roles import on the Grow and Prosper+ plans only. Duplicates are merged in LinkedIn before extraction where they can be identified, and the list is matched against contacts already in Smokeball. It is not always possible to find every one, so some may carry across.
Does everything in LinkedIn have a place in Smokeball?
On paper, yes: each kind of record LinkedIn holds has a place in Smokeball. Whether every field fits is a separate question, and the analysis answers it field by field. Anything with no place comes across as a note or stays behind, and you see which before the move.
What has to be decided before LinkedIn data is loaded into Smokeball?
Less than on most routes: each kind of record here either carries across or is archived. The firm also decides which closed matters and how many versions of a document are in scope.
Other routes
Other routes from LinkedIn and into Smokeball
Other destinations from LinkedIn
Where to start
Before and after the move.
Choosing the system comes before a migration. Setting it up and putting AI to work come after.
Choose your systems
Technology stack selection
Decide which practice management system your firm runs, with the evidence and the cost beside it.
About four weeks for a firm of about 15 people. Fixed price, set after a free first call.
Move your data
Data migration
Your data is cleaned up before anything moves, then a trial load is checked against the old system.
Fixed price, agreed after the analysis.
Set up your new system
Implementation
Your new system set up around the way your firm works: configuration, document automation and training.
A small firm of 1 to 10 users typically takes 4 to 8 weeks. A mid-sized firm of 10 to 50 users takes 8 to 16 weeks.
Put AI to work
AI advisory and enablement
A small group of your people learn to use an approved AI tool on real work, under written rules.
Two to four weeks for a small first group. Fixed price, set after a free first call.
LinkedIn and Smokeball are the names and marks of their owners, used here only to identify the two systems.
Moving from LinkedIn to Smokeball?
Tell us what you are moving. You get a plan and a fixed price after the analysis.
We reply within one business day.