Data migration route
LinkedIn to Filevine migration
LinkedIn is a cloud contacts and calendar tool, and Filevine is a cloud case management system. This is a narrow move: the records LinkedIn holds are matched to the people and matters in Filevine.
LinkedInCloud- Contacts: Carried across
FilevineCloud- 1 carried
What moves
What moves from LinkedIn to Filevine
Each row is a kind of record LinkedIn holds, whether Filevine has a place for it, and what is planned. On this route one kind of record carries across.
| Record | What is planned | ||
|---|---|---|---|
| ContactsClients, other parties and referrers | Held in partA member’s own first-degree connections: name, profile URL, company, position, date connected. | Has a placeContact cards, linked to projects. | Carried across |
What the plans mean
- Carried across
- Filevine has a place for this kind of record. It is loaded there and checked against LinkedIn.
The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.
This kind of move
A narrow move, checked like a large one.
A source like LinkedIn holds one kind of record well: an address book, a calendar, a set of signed documents. None of it is organised by matter. The work is matching each contact to a contact in Filevine, and each appointment or signed document to the matter it belongs to. Where a match cannot be made from a name, an email address or a reference, the record is listed for the firm to place by hand or leave behind.
The volume is small and the load is quick, which makes it tempting to skip the checks. They still apply. Contacts are compared with what Filevine already holds, so the move does not create a second copy of every client. Dates are checked for time zones, a common fault in calendar data. Signed documents arrive with their completion date and, where the service provides one, the audit record as a separate file.
Both are hosted by their makers, so nothing is collected from the firm’s office. What can be taken out of LinkedIn depends on its export tools and on what its maker provides on request, and that is confirmed during the analysis, before a date is set. The subscription to LinkedIn is kept running until the checks on Filevine are finished.
Where the data is now
Leaving LinkedIn
There is no firm-wide export from LinkedIn. Each lawyer requests an archive of their own account and receives a connections file. Those files are combined, checked against the contacts the firm already holds, and loaded as people with a company and a job title. It is a contact list and nothing more, and it is treated as one.
Each lawyer exports their own
The archive is requested from a member’s own settings, on a computer and not the mobile app, and the download link goes to that member’s primary email address and lasts 72 hours. Nobody else can request it for them. The firm collects one connections file per lawyer, and each file is labelled with whose network it is.
Email addresses are often missing
An email address is included only when the connection has chosen to let their connections download it. Many rows have a name, a company and a position, and no way to write to the person. Rows are matched to existing contacts by name and company, and the firm’s own record supplies the address.
Company and title go stale
The company and position columns show what each person’s profile said on the day of the export. People move firms. Where a contact already exists in the destination, the LinkedIn details are shown beside the firm’s own for someone to choose between, and nothing is overwritten without that choice.
Whose contact is it
A partner’s connections are their personal network, and some will not want every name visible to the whole firm. Before anything is loaded the firm decides whether these become shared firm contacts, private contacts of the lawyer, or a marketing list, and which lawyer is recorded as knowing each one.
Names in other scripts
LinkedIn’s help pages say the CSV format does not support every character, and names written in Chinese, Japanese or Hebrew script may not come through. Those rows are found by checking for blank or garbled names once the files are combined, and are corrected by hand from the profile address.
Where it is going
Arriving in Filevine
Loading a firm into Filevine depends on the project types being built first. Until the sections and fields exist there is nowhere for the data to go, so configuration and migration are planned together. The old system’s parties, insurers, providers and key dates are mapped to sections, and its notes and emails are loaded into each project’s activity feed.
Project types before data
Each area of practice needs a project type with its sections, fields and phases defined in the Customs Editor. Changes made there apply to every project of that type. The types are drafted from the old system’s data, tested with a few real cases, and only then is the bulk load run.
One contact card per person
Contacts are held as contact cards. A doctor or adjuster who appears on many projects is best loaded as one card, not one for each project. Duplicates in the old system are merged before loading where they can be identified. Loading them as they are produces several cards for the same person, and staff then pick the wrong one when adding a party.
Lists become collection items
Anything the old system held as a list against a matter, such as providers, liens, insurance policies or expenses, is loaded as items in a collection section. Each column needs a matching field. Totals per project are compared with the old system afterwards, since those figures feed the settlement and disbursal sheets.
History goes into the feed
File notes, emails and completed tasks from the old system are loaded into the activity feed with their original dates and authors. Authors must exist as users or be recorded in the text. The feed is long on an old case, so staff are shown how to filter it before go-live.
Billing is a separate switch
The Billing section only appears once Billing is enabled for the firm. Time entries, invoices and trust balances from the old system need that in place before they can be loaded. A firm that leaves it off can still record case costs in a collection section built for the purpose.
How NewLaw runs it
Four steps, in this order.
Nothing financial lands in Filevine on this route, which makes it repeatable: a load can be run again until it is right.
Analysis
We read what LinkedIn holds and how it is organised, then agree with you where each kind of record will sit in Filevine. Anything with no place there stays behind or is archived, and you see which before the move.
Clean-up
Duplicate clients, matters and folders are merged where they can be identified, and naming is put into one format, before anything is copied. It is not always possible to find every one, so some may carry across.
Trial load
A trial is loaded into Filevine and checked against LinkedIn: record and file counts, the links between records, document dates, and a sample opened by your own people. Exceptions are listed for you to decide.
Cutover
There is no financial cutover on this route. After a short freeze on changes in LinkedIn, a final pass over a weekend picks up what changed since the trial. LinkedIn is kept read only as the fall-back record.
Fixed price, agreed after the analysis. How NewLaw moves legal data
Start
Start this migration
Tell us what is in LinkedIn and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.
Step 1 of 5
What happens after you send it
- A free first call
We go through your answers with you and ask about anything they leave open.
- An analysis of what LinkedIn holds
What is in it, how its records link, and where each piece would sit in Filevine. Anything with no place there comes across as a note or stays behind, and you see which before the move.
- A fixed price in writing
Set after the analysis, so it reflects what is in your data. You have it before any work starts.
Beyond the data
Setting up Filevine
Loaded data is not yet a working system. This is what NewLaw sets up in Filevine, beyond the migration, so that people can work in it from the first day.
Filevine arrives as a platform to be configured, and most of the implementation is design. Someone has to decide what a project looks like for each kind of work the firm does, what moves it from one phase to the next, and who can see what. Those decisions are made with the people who run the files, then built and tested.
Set-up decisions in Filevine
- Design project types, sections and fields for each practice area
- Define phases and the tasks each phase should trigger
- Build document templates that fill from project fields
- Set teams, permissions and protected sections for restricted matters
- Decide whether Billing and Payments are switched on
- Connect Lead Docket so signed leads become projects
Questions
LinkedIn to Filevine: what firms ask
Can the firm export all its lawyers’ connections at once?
No. LinkedIn provides each member’s own data to that member only, and lists only first-degree connections. Every lawyer runs the request from their own account and passes on the connections file. The files are then merged, and people known to several lawyers appear once with each relationship recorded.
Will LinkedIn messages come across?
The larger archive includes a messages file with dates, subjects and content. It is a member’s private correspondence and is rarely appropriate to load into a firm system. If a particular conversation matters to a file, the lawyer saves it to that matter by hand, the way they would a personal email.
Do contacts from LinkedIn arrive in Filevine without duplicates?
Filevine has a place for contacts. Contact cards, linked to projects. Duplicates are merged in LinkedIn before extraction where they can be identified, and the list is matched against contacts already in Filevine. It is not always possible to find every one, so some may carry across.
Does everything in LinkedIn have a place in Filevine?
On paper, yes: each kind of record LinkedIn holds has a place in Filevine. Whether every field fits is a separate question, and the analysis answers it field by field. Anything with no place comes across as a note or stays behind, and you see which before the move.
What has to be decided before LinkedIn data is loaded into Filevine?
Less than on most routes: each kind of record here either carries across or is archived. The firm also decides which closed matters and how many versions of a document are in scope.
Other routes
Other routes from LinkedIn and into Filevine
Other destinations from LinkedIn
Where to start
Before and after the move.
Choosing the system comes before a migration. Setting it up and putting AI to work come after.
Choose your systems
Technology stack selection
Decide which practice management system your firm runs, with the evidence and the cost beside it.
About four weeks for a firm of about 15 people. Fixed price, set after a free first call.
Move your data
Data migration
Your data is cleaned up before anything moves, then a trial load is checked against the old system.
Fixed price, agreed after the analysis.
Set up your new system
Implementation
Your new system set up around the way your firm works: configuration, document automation and training.
A small firm of 1 to 10 users typically takes 4 to 8 weeks. A mid-sized firm of 10 to 50 users takes 8 to 16 weeks.
Put AI to work
AI advisory and enablement
A small group of your people learn to use an approved AI tool on real work, under written rules.
Two to four weeks for a small first group. Fixed price, set after a free first call.
LinkedIn and Filevine are the names and marks of their owners, used here only to identify the two systems.
Moving from LinkedIn to Filevine?
Tell us what you are moving. You get a plan and a fixed price after the analysis.
We reply within one business day.