Data migration route
iCalendar (.ics) files to Filevine migration
iCalendar (.ics) files are contact and calendar data kept as files, and Filevine is a cloud case management system. This is a narrow move: the records iCalendar (.ics) files hold are matched to the people and matters in Filevine.
iCalendar (.ics) filesFiles- Documents: Carried across
- Notes: Carried across
- Calendar: Carried across
- Tasks: Carried across
- Custom fields: Carried with mapping
FilevineCloud- 4 carried
- 1 mapped
What moves
What moves from iCalendar (.ics) files to Filevine
Each row is a kind of record iCalendar (.ics) files hold, whether Filevine has a place for it, and what is planned. On this route four kinds of record carry across and one kind needs mapping.
| Record | What is planned | ||
|---|---|---|---|
| DocumentsFiles stored in or linked from the system | Held in partThe format allows attachments by link or embedded; few exports include them. | Has a placeDocs section with folders. Templated project folders can be set per type. | Carried across |
| NotesFile notes, matter notes and contact notes | Held in partEvent descriptions, and journal entries where the exporting program writes them. | Has a placeHeld as notes in the activity feed. | Carried across |
| CalendarAppointments, court dates and deadlines | HeldEvents with start, end, summary, location, attendees, recurrence and alarms. | Has a placeDeadlines and calendar events. | Carried across |
| TasksTo-dos and workflow steps assigned to people | Held in partTo-do components, if the exporting program includes them. | Has a place | Carried across |
| Custom fieldsFields and record types the firm added itself | Held in partCategories, and non-standard properties some programs add. | Has a placeCustom sections and fields per project type. | Carried with mapping |
What the plans mean
- Carried across
- Filevine has a place for this kind of record. It is loaded there and checked against iCalendar (.ics) files.
- Carried with mapping
- Filevine holds this differently, or in part. Each field or value is matched to its place before loading, and you see the mapping first.
The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.
This kind of move
A narrow move, checked like a large one.
A source like iCalendar (.ics) files holds one kind of record well: an address book, a calendar, a set of signed documents. None of it is organised by matter. The work is matching each contact to a contact in Filevine, and each appointment or signed document to the matter it belongs to. Where a match cannot be made from a name, an email address or a reference, the record is listed for the firm to place by hand or leave behind.
The volume is small and the load is quick, which makes it tempting to skip the checks. They still apply. Contacts are compared with what Filevine already holds, so the move does not create a second copy of every client. Dates are checked for time zones, a common fault in calendar data. Signed documents arrive with their completion date and, where the service provides one, the audit record as a separate file.
With iCalendar (.ics) files the files are already on equipment the firm controls, so there is no export step: they are read where they are. Upload speed sets the pace for a large store. The originals stay in place, unchanged, until the firm has checked the copy in Filevine.
Where the data is now
Leaving iCalendar (.ics) files
A calendar is the one part of a firm’s data where a mistake is noticed on the day it matters. Loading from .ics files is simple in outline and unforgiving in detail: a hearing an hour out, or a weekly meeting that repeats forever, damages trust in the new system quickly. The checks concentrate on future dates, recurring entries and time zones.
An export is a snapshot
The file holds the calendar as it stood at the moment of export. Appointments made the next morning are not in it. A trial export is used for testing, and the real one is taken inside the cutover freeze, after staff have stopped adding entries to the old calendar.
Recurring entries are rules
A fortnightly team meeting is one entry with a rule, plus exceptions for the weeks it was moved or cancelled. Programs differ in how they read those rules. A handful of real repeating appointments with known exceptions are checked date by date in the new calendar after the trial load.
Time zones decide the hour
Times may be written in UTC, against a named time zone defined in the file, or as floating times with no zone at all. A firm with offices in two states, or entries created while travelling, will have a mix. Future court dates are compared one for one against the old calendar.
No link to the matter
The format has no field for a matter. If the old system put the matter number in the summary or description, entries are linked by reading it. Otherwise they arrive on the right person’s calendar and unattached to any matter, and key dates are re-linked by hand for open matters.
Identifiers stop double loading
Every event carries a UID. The same meeting exported from five attendees’ calendars has one UID, so it can be loaded once and shown to all five. A second load after a failed first attempt updates entries by UID where the destination supports it, and does not duplicate them.
Where it is going
Arriving in Filevine
Loading a firm into Filevine depends on the project types being built first. Until the sections and fields exist there is nowhere for the data to go, so configuration and migration are planned together. The old system’s parties, insurers, providers and key dates are mapped to sections, and its notes and emails are loaded into each project’s activity feed.
Project types before data
Each area of practice needs a project type with its sections, fields and phases defined in the Customs Editor. Changes made there apply to every project of that type. The types are drafted from the old system’s data, tested with a few real cases, and only then is the bulk load run.
One contact card per person
Contacts are held as contact cards. A doctor or adjuster who appears on many projects is best loaded as one card, not one for each project. Duplicates in the old system are merged before loading where they can be identified. Loading them as they are produces several cards for the same person, and staff then pick the wrong one when adding a party.
Lists become collection items
Anything the old system held as a list against a matter, such as providers, liens, insurance policies or expenses, is loaded as items in a collection section. Each column needs a matching field. Totals per project are compared with the old system afterwards, since those figures feed the settlement and disbursal sheets.
History goes into the feed
File notes, emails and completed tasks from the old system are loaded into the activity feed with their original dates and authors. Authors must exist as users or be recorded in the text. The feed is long on an old case, so staff are shown how to filter it before go-live.
Billing is a separate switch
The Billing section only appears once Billing is enabled for the firm. Time entries, invoices and trust balances from the old system need that in place before they can be loaded. A firm that leaves it off can still record case costs in a collection section built for the purpose.
How NewLaw runs it
Four steps, in this order.
Nothing financial lands in Filevine on this route, which makes it repeatable: a load can be run again until it is right.
Analysis
We read what iCalendar (.ics) files hold and how it is organised, then agree with you where each kind of record will sit in Filevine. Anything with no place there stays behind or is archived, and you see which before the move.
Clean-up
Duplicate clients, matters and folders are merged where they can be identified, and naming is put into one format, before anything is copied. It is not always possible to find every one, so some may carry across.
Trial load
A trial is loaded into Filevine and checked against iCalendar (.ics) files: record and file counts, the links between records, document dates, and a sample opened by your own people. Exceptions are listed for you to decide.
Cutover
There is no financial cutover on this route. After a short freeze on changes in iCalendar (.ics) files, a final pass over a weekend picks up what changed since the trial. iCalendar (.ics) files are kept read only as the fall-back record.
Fixed price, agreed after the analysis. How NewLaw moves legal data
Start
Start this migration
Tell us what is in iCalendar (.ics) files and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.
Step 1 of 5
What happens after you send it
- A free first call
We go through your answers with you and ask about anything they leave open.
- An analysis of what iCalendar (.ics) files holds
What is in it, how its records link, and where each piece would sit in Filevine. Anything with no place there comes across as a note or stays behind, and you see which before the move.
- A fixed price in writing
Set after the analysis, so it reflects what is in your data. You have it before any work starts.
Beyond the data
Setting up Filevine
Loaded data is not yet a working system. This is what NewLaw sets up in Filevine, beyond the migration, so that people can work in it from the first day.
Filevine arrives as a platform to be configured, and most of the implementation is design. Someone has to decide what a project looks like for each kind of work the firm does, what moves it from one phase to the next, and who can see what. Those decisions are made with the people who run the files, then built and tested.
Set-up decisions in Filevine
- Design project types, sections and fields for each practice area
- Define phases and the tasks each phase should trigger
- Build document templates that fill from project fields
- Set teams, permissions and protected sections for restricted matters
- Decide whether Billing and Payments are switched on
- Connect Lead Docket so signed leads become projects
Questions
iCalendar (.ics) files to Filevine: what firms ask
Will our court dates and limitation reminders come across?
The dates will, as calendar entries. What may not survive is whatever made them special in the old system: a deadline type, a link to the matter, a rule that calculated the date. Reminders arrive as alarms on the entry where the export includes them. Every future critical date is listed and checked by the firm before go-live.
Do we need past appointments, or only future ones?
Either is workable. Past entries are evidence of attendances and are sometimes used to reconstruct time. A firm can bring a set number of years and keep the full export file with the fall-back records. Whatever is chosen, every future entry is in scope.
Our calendar is in Outlook. Is an .ics file the right way to move it?
Often not. Where the calendar lives in Microsoft 365 or Exchange and the firm is keeping that, the calendar does not need to move at all, and the new practice system connects to it. An .ics export is the fallback for calendars locked inside a product that offers no other way out.
Do documents from iCalendar (.ics) files keep their folders and dates in Filevine?
Filevine stores documents. Docs section with folders. Templated project folders can be set per type. Each file is placed under the client and matter it came from, and created and modified dates are carried, so a document still shows when it was written. The trial load is checked by count and by opening a sample.
Does everything in iCalendar (.ics) files have a place in Filevine?
On paper, yes: each kind of record iCalendar (.ics) files hold has a place in Filevine. Whether every field fits is a separate question, and the analysis answers it field by field. Anything with no place comes across as a note or stays behind, and you see which before the move.
What has to be decided before iCalendar (.ics) files data is loaded into Filevine?
Custom fields are carried with mapping, so each mapping is agreed with you first. The firm also decides which closed matters and how many versions of a document are in scope.
Other routes
Other routes from iCalendar (.ics) files and into Filevine
Other destinations from iCalendar (.ics) files
Where to start
Before and after the move.
Choosing the system comes before a migration. Setting it up and putting AI to work come after.
Choose your systems
Technology stack selection
Decide which practice management system your firm runs, with the evidence and the cost beside it.
About four weeks for a firm of about 15 people. Fixed price, set after a free first call.
Move your data
Data migration
Your data is cleaned up before anything moves, then a trial load is checked against the old system.
Fixed price, agreed after the analysis.
Set up your new system
Implementation
Your new system set up around the way your firm works: configuration, document automation and training.
A small firm of 1 to 10 users typically takes 4 to 8 weeks. A mid-sized firm of 10 to 50 users takes 8 to 16 weeks.
Put AI to work
AI advisory and enablement
A small group of your people learn to use an approved AI tool on real work, under written rules.
Two to four weeks for a small first group. Fixed price, set after a free first call.
iCalendar (.ics) files and Filevine are the names and marks of their owners, used here only to identify the two systems.
Moving from iCalendar (.ics) files to Filevine?
Tell us what you are moving. You get a plan and a fixed price after the analysis.
We reply within one business day.