Skip to content
NEWLAW.COM
+61 1300 495 281
Let’s talk

Data migration route

CosmoLex to Filevine migration

CosmoLex is a cloud practice management system, and Filevine is a cloud case management system. Matter records move into cases, and the firm decides where its accounting runs from the cutover date.

FromCosmoLexCloud
  1. Matters: Carried across
  2. Contacts: Carried across
  3. Documents: Carried across
  4. Emails: Carried across
  5. Notes: Carried across
  6. Calendar: Carried across
  7. Tasks: Carried across
  8. Time and expenses: Carried with mapping
  9. Billing: Carried with mapping
  10. Trust money: Carried with mapping
  11. Custom fields: Carried with mapping
  12. Templates: Carried with mapping
  13. Intake: Carried with mapping
  14. Firm accounts: Confirmed in the analysis
ToFilevineCloud
  • 7 carried
  • 6 mapped
  • 1 to confirm
What the two products hold. The analysis confirms it field by field.

What moves

What moves from CosmoLex to Filevine

Each row is a kind of record CosmoLex holds, whether Filevine has a place for it, and what is planned. On this route seven kinds of record carry across, six kinds need mapping and one kind is confirmed in the analysis.

Records in CosmoLex and their place in Filevine
RecordIn CosmoLexIn FilevineWhat is planned
MattersMatters or cases, with their numbers, types, parties and statusHeldEach has a Matter File #, an area of law and a matter owner.Has a placeLoaded as projects of a defined project type.Carried across
ContactsClients, other parties and referrersHeldClients and other contacts; payees for accounts payable are a separate list.Has a placeContact cards, linked to projects.Carried across
DocumentsFiles stored in or linked from the systemHeldBuilt-in storage, or OneDrive, Google Drive, Dropbox, Box or NetDocuments linked by matter.Has a placeDocs section with folders. Templated project folders can be set per type.Carried across
EmailsEmails saved to matters or to the storeHeld in partEmails sent to the firm’s forwarding address are tagged to matters by sender or recipient.Has a placeHeld in the activity feed of the project.Carried across
NotesFile notes, matter notes and contact notesHeldHas a placeHeld as notes in the activity feed.Carried across
CalendarAppointments, court dates and deadlinesHeldHas a placeDeadlines and calendar events.Carried across
TasksTo-dos and workflow steps assigned to peopleHeldTask workflows can be loaded into new or existing matters.Has a placeCarried across
Time and expensesTime and expense entries, billed and unbilledHeldEntries are called timecards.Has a place in partNeeds the Billing product enabled.Carried with mapping
BillingInvoices, payments and debtor balancesHeldHas a place in partNeeds the Billing product enabled.Carried with mapping
Trust moneyTrust or client account ledgers and balancesHeldTrust ledgers, journals and three-way reconciliation reports.Has a place in partTrust accounts sit in Payments by Filevine. Loading history is confirmed in the analysis.Carried with mapping
Firm accountsGeneral ledger, office account and payablesHeldGeneral ledger with chart of accounts, bank feeds, accounts payable and cheque printing.To be confirmedConfirmed in the analysis
Custom fieldsFields and record types the firm added itselfHeldCustom fields can be used as merge fields in documents.Has a placeCustom sections and fields per project type.Carried with mapping
TemplatesPrecedents, document templates and automationHeldTemplates are Word documents using merge fields downloaded from CosmoLex.Has a place in partTemplates are rebuilt as Filevine document templates. They are not converted.Carried with mapping
IntakeLeads, enquiries, intake forms and pipelinesHeld in partIntake forms are included; the vendor also describes lead tracking.Has a place in partLeads belong in Lead Docket, which passes signed clients to Filevine.Carried with mapping

What the plans mean

Carried across
Filevine has a place for this kind of record. It is loaded there and checked against CosmoLex.
Carried with mapping
Filevine holds this differently, or in part. Each field or value is matched to its place before loading, and you see the mapping first.
Confirmed in the analysis
We could not confirm this from the two products’ own material, so it is checked against your data before the plan is fixed.

The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.

This kind of move

Matters become cases. The ledgers need a home.

Going from a practice management system to a case management system is a move towards the file and away from the ledger. Matters, parties, documents, notes and deadlines have a natural place in Filevine. Time, invoices, trust and the general ledger often do not, or only in part, and the table above shows which. Before the move is planned the firm settles where billing and trust accounting will run, because that decides what is loaded and what is archived.

Case systems are usually built around a practice area, with their own stages, roles and document sets. A general matter from CosmoLex has to be given a case type in Filevine, and that choice drives which fields and workflows it gets. The mapping is agreed type by type. Financial history with no place in Filevine is exported as reports and ledgers the firm can open without CosmoLex, and kept as the record of what was billed and held.

Both are hosted by their makers, so nothing is collected from the firm’s office. What can be taken out of CosmoLex depends on its export tools and on what its maker provides on request, and that is confirmed during the analysis, before a date is set. The subscription to CosmoLex is kept running until the checks on Filevine are finished.

Where the data is now

Leaving CosmoLex is rarely just a practice management change. For most firms it is also the day their accounting system changes, since the general ledger, bank reconciliations and trust records are all inside. The matters and documents are planned in the usual way. A harder conversation is the one with the bookkeeper and accountant about where the books go next and on what date.

  1. One ledger for everything

    Billing posts straight to the general ledger, on a cash or accrual basis the firm chose at set-up. The books are not in a separate package that carries on unchanged. A destination with lighter accounting means a new package for the books, and trial balances from both are compared at the cutover date.

  2. Reconciliations stay behind

    Bank feeds, matched transactions and completed reconciliation statements are a record of work done, not data another system can load. Before cutover the firm runs and saves the reconciliation and three-way reports for every period it may be asked about, and the read-only copy of CosmoLex is kept as the fall-back record.

  3. Inactive means settled

    A matter can only be made inactive once its trust funds are disbursed, and on accrual accounting once its receivable is cleared. So an active matter is not always a live one. Some are finished files still holding money. They are listed for the firm, because the destination will treat them as open.

  4. Emails tagged by address

    Forwarded emails are tagged to a matter when the sender or recipient matches an email address on the client record, and land in a Tagged folder. Where there is no match, or more than one, the email waits for someone to file it. That untagged pile is either cleared or knowingly left behind before extraction.

  5. Law society records in Canada

    The Canadian edition produces law society compliance reports such as the clients’ general journal and general receipts journal. A Canadian firm needs those reports complete to the cutover date and stored where they can be produced on request. The destination’s own reports only start from the opening balances.

More about moving off CosmoLex

Where it is going

Loading a firm into Filevine depends on the project types being built first. Until the sections and fields exist there is nowhere for the data to go, so configuration and migration are planned together. The old system’s parties, insurers, providers and key dates are mapped to sections, and its notes and emails are loaded into each project’s activity feed.

  1. Project types before data

    Each area of practice needs a project type with its sections, fields and phases defined in the Customs Editor. Changes made there apply to every project of that type. The types are drafted from the old system’s data, tested with a few real cases, and only then is the bulk load run.

  2. One contact card per person

    Contacts are held as contact cards. A doctor or adjuster who appears on many projects is best loaded as one card, not one for each project. Duplicates in the old system are merged before loading where they can be identified. Loading them as they are produces several cards for the same person, and staff then pick the wrong one when adding a party.

  3. Lists become collection items

    Anything the old system held as a list against a matter, such as providers, liens, insurance policies or expenses, is loaded as items in a collection section. Each column needs a matching field. Totals per project are compared with the old system afterwards, since those figures feed the settlement and disbursal sheets.

  4. History goes into the feed

    File notes, emails and completed tasks from the old system are loaded into the activity feed with their original dates and authors. Authors must exist as users or be recorded in the text. The feed is long on an old case, so staff are shown how to filter it before go-live.

  5. Billing is a separate switch

    The Billing section only appears once Billing is enabled for the firm. Time entries, invoices and trust balances from the old system need that in place before they can be loaded. A firm that leaves it off can still record case costs in a collection section built for the purpose.

More about moving into Filevine

How NewLaw runs it

Four steps, in this order.

Trust money moves on this route, so the trust cutover gets a rehearsal of its own.

  1. Analysis

    We read what CosmoLex holds and how its records link, then agree with you, field by field, where each piece will sit in Filevine. Anything with no place there comes across as a note or stays behind, and you see which before the move.

  2. Clean-up

    Duplicate contacts and matters are merged where they can be identified, and inconsistent entries are put into one format, in CosmoLex, before extraction. It is not always possible to find every one, so some may carry across.

  3. Trial load

    The data is loaded into Filevine as a trial and checked against CosmoLex: record counts, trust and debtor totals, the links between records, document dates. Exceptions are listed for you to decide.

  4. Cutover

    Changes in CosmoLex are frozen for an agreed window, the data is collected a final time and Filevine goes live over a weekend. The trust and financial cutover is rehearsed on a full trial load first, because it cannot be re-run the way a document load can. CosmoLex is kept read only as the fall-back record.

Fixed price, agreed after the analysis. How NewLaw moves legal data

Start

Start this migration

Tell us what is in CosmoLex and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.

Step 1 of 5

Step 1 of 5: Start with the route

Moving fromCosmoLex
Moving toFilevine

The route comes from this page. Four short steps follow. Nothing you send commits your firm to anything.

What happens after you send it

  1. A free first call

    We go through your answers with you and ask about anything they leave open.

  2. An analysis of what CosmoLex holds

    What is in it, how its records link, and where each piece would sit in Filevine. Anything with no place there comes across as a note or stays behind, and you see which before the move.

  3. A fixed price in writing

    Set after the analysis, so it reflects what is in your data. You have it before any work starts.

Beyond the data

Setting up Filevine

Loaded data is not yet a working system. This is what NewLaw sets up in Filevine, beyond the migration, so that people can work in it from the first day.

Filevine arrives as a platform to be configured, and most of the implementation is design. Someone has to decide what a project looks like for each kind of work the firm does, what moves it from one phase to the next, and who can see what. Those decisions are made with the people who run the files, then built and tested.

Set-up decisions in Filevine

  • Design project types, sections and fields for each practice area
  • Define phases and the tasks each phase should trigger
  • Build document templates that fill from project fields
  • Set teams, permissions and protected sections for restricted matters
  • Decide whether Billing and Payments are switched on
  • Connect Lead Docket so signed leads become projects

Questions

CosmoLex to Filevine: what firms ask

We are on CosmoLex Classic and are being moved to NextGen. Should we wait before changing systems?

It makes little difference to the data. The vendor describes NextGen as the same core functions with a new interface, and the firm’s records carry over. If a move away is already decided, the analysis can be done on whichever version the firm is using on the day.

Can our Word templates be reused?

The documents themselves can. CosmoLex templates are ordinary Word files that use mail merge fields taken from a CosmoLex field list. In a new system the wording and layout survive, and each merge field is replaced with the destination’s equivalent. Fields based on custom data take the longest to match.

How far back does the financial history go across?

That is a choice. Some destinations accept historic invoices, payments and trust transactions as records. Others start from opening balances, with older detail left in the read-only CosmoLex copy and in saved reports. Whichever is chosen, a complete trial load is run first so the trust and ledger figures can be agreed before the real cutover.

Do trust balances in CosmoLex have a place in Filevine?

In part. Trust accounts sit in Payments by Filevine. Loading history is confirmed in the analysis. The analysis sets out which trust records have a place in Filevine and which are kept as an archive, and the trust cutover is rehearsed on a full trial load before the real one.

Does everything in CosmoLex have a place in Filevine?

Most of it does on paper. The firm’s accounts could not be confirmed from the two products’ own material, so those are checked in the analysis. Anything that turns out to have no place in Filevine is kept as a readable archive, and you see which before the move.

What has to be decided before CosmoLex data is loaded into Filevine?

Time entries, billing records, trust ledgers, custom fields, templates and intake records are carried with mapping, so each mapping is agreed with you first. The firm’s accounts are confirmed in the analysis. The firm also sets the cutover date and how much financial history comes across as live records.

Where to start

Before and after the move.

Choosing the system comes before a migration. Setting it up and putting AI to work come after.

How we do itDiscovery to rollout, step by step

CosmoLex and Filevine are the names and marks of their owners, used here only to identify the two systems.

Moving from CosmoLex to Filevine?

Tell us what you are moving. You get a plan and a fixed price after the analysis.

We reply within one business day.