Skip to content
NEWLAW.COM
+61 1300 495 281
Let’s talk

Data migration route

Tabs3 to Filevine migration

Tabs3 is a server-based practice management system, and Filevine is a cloud case management system. Matter records move into cases, and the firm decides where its accounting runs from the cutover date.

FromTabs3Server
  1. Matters: Carried across
  2. Contacts: Carried across
  3. Documents: Carried across
  4. Emails: Carried across
  5. Notes: Carried across
  6. Calendar: Carried across
  7. Tasks: Carried across
  8. Time and expenses: Carried with mapping
  9. Billing: Carried with mapping
  10. Trust money: Carried with mapping
  11. Custom fields: Carried with mapping
  12. Templates: Carried with mapping
  13. Intake: Carried with mapping
  14. Firm accounts: Confirmed in the analysis
ToFilevineCloud
  • 7 carried
  • 6 mapped
  • 1 to confirm
What the two products hold. The analysis confirms it field by field.

What moves

What moves from Tabs3 to Filevine

Each row is a kind of record Tabs3 holds, whether Filevine has a place for it, and what is planned. On this route seven kinds of record carry across, six kinds need mapping and one kind is confirmed in the analysis.

Records in Tabs3 and their place in Filevine
RecordIn Tabs3In FilevineWhat is planned
MattersMatters or cases, with their numbers, types, parties and statusHeldA matter is the part of the Client ID after the decimal point.Has a placeLoaded as projects of a defined project type.Carried across
ContactsClients, other parties and referrersHeldHas a placeContact cards, linked to projects.Carried across
DocumentsFiles stored in or linked from the systemHeld in partPracticeMaster links documents to clients and contacts.Has a placeDocs section with folders. Templated project folders can be set per type.Carried across
EmailsEmails saved to matters or to the storeHeld in partPracticeMaster keeps email records in its Journal.Has a placeHeld in the activity feed of the project.Carried across
NotesFile notes, matter notes and contact notesHeld in partNote, phone and research records in the PracticeMaster Journal.Has a placeHeld as notes in the activity feed.Carried across
CalendarAppointments, court dates and deadlinesHeld in partIn PracticeMaster.Has a placeDeadlines and calendar events.Carried across
TasksTo-dos and workflow steps assigned to peopleHeld in partIn PracticeMaster.Has a placeCarried across
Time and expensesTime and expense entries, billed and unbilledHeldIn Tabs3 Billing, with timers in PracticeMaster.Has a place in partNeeds the Billing product enabled.Carried with mapping
BillingInvoices, payments and debtor balancesHeldIn Tabs3 Billing.Has a place in partNeeds the Billing product enabled.Carried with mapping
Trust moneyTrust or client account ledgers and balancesHeld in partWith the Trust Accounting module.Has a place in partTrust accounts sit in Payments by Filevine. Loading history is confirmed in the analysis.Carried with mapping
Firm accountsGeneral ledger, office account and payablesHeld in partWith the General Ledger and Accounts Payable modules.To be confirmedConfirmed in the analysis
Custom fieldsFields and record types the firm added itselfHeld in partPracticeMaster Areas of Practice carry the firm’s own files and fields.Has a placeCustom sections and fields per project type.Carried with mapping
TemplatesPrecedents, document templates and automationHeld in partDocument assembly in PracticeMaster; statement layouts in Billing.Has a place in partTemplates are rebuilt as Filevine document templates. They are not converted.Carried with mapping
IntakeLeads, enquiries, intake forms and pipelinesHeld in partTabs3 CRM covers leads and intake and works with PracticeMaster.Has a place in partLeads belong in Lead Docket, which passes signed clients to Filevine.Carried with mapping

What the plans mean

Carried across
Filevine has a place for this kind of record. It is loaded there and checked against Tabs3.
Carried with mapping
Filevine holds this differently, or in part. Each field or value is matched to its place before loading, and you see the mapping first.
Confirmed in the analysis
We could not confirm this from the two products’ own material, so it is checked against your data before the plan is fixed.

The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.

This kind of move

Matters become cases. The ledgers need a home.

Going from a practice management system to a case management system is a move towards the file and away from the ledger. Matters, parties, documents, notes and deadlines have a natural place in Filevine. Time, invoices, trust and the general ledger often do not, or only in part, and the table above shows which. Before the move is planned the firm settles where billing and trust accounting will run, because that decides what is loaded and what is archived.

Case systems are usually built around a practice area, with their own stages, roles and document sets. A general matter from Tabs3 has to be given a case type in Filevine, and that choice drives which fields and workflows it gets. The mapping is agreed type by type. Financial history with no place in Filevine is exported as reports and ledgers the firm can open without Tabs3, and kept as the record of what was billed and held.

Tabs3 runs on the firm’s own equipment, so the data is collected there: a copy of the database and the folders its documents sit in, taken with the firm’s IT provider or over a remote session. Filevine is hosted by its maker, so loading depends on the import tools and access it provides. The old machine is kept, read only, as the fall-back record.

Where the data is now

The first question for a firm on Tabs3 is which modules it owns, because each one is a different set of records. Billing holds time, fees and receivables. PracticeMaster holds contacts, calendar, documents and the journal. Trust, payables and the ledger are separate programs again. All of them share the Client ID, which is what ties a move together.

  1. One ID for client and matter

    A Client ID is up to twelve characters including a decimal point. The part before the point is the client and the part after is the matter. Firms chose a numeric, alphabetic or mixed key type at set-up, and how many decimal places to allow. The ID is split on the way out and both halves are kept.

  2. Everything in one directory

    The modules integrate only when installed in the same directory, which the software calls the current working directory. Its data is a set of DAT and IDX files there. A complete copy of that directory, taken with all users out, is the source for every trial load.

  3. Standard and Platinum

    The Platinum edition adds a server component with scheduled HotBackup and SQL access to the data, and the standard edition has neither. Which edition the firm runs changes how a consistent copy is taken and what can read it, so it is established in the first conversation.

  4. Figures that are not stored

    The vendor’s own help notes that accounts receivable and work in process are calculated from ledger and fee records, not held as fields. So balances cannot be lifted out as a column. They are rebuilt from the transactions and then agreed to the reports the firm prints.

  5. Cloud or server

    Firms on Tabs3 Cloud use the suite as hosted by the vendor, and some on-premises firms run it with one of the vendor’s hosting partners. Where the files are, and who is able to copy them, is settled before a cutover date is set.

More about moving off Tabs3

Where it is going

Loading a firm into Filevine depends on the project types being built first. Until the sections and fields exist there is nowhere for the data to go, so configuration and migration are planned together. The old system’s parties, insurers, providers and key dates are mapped to sections, and its notes and emails are loaded into each project’s activity feed.

  1. Project types before data

    Each area of practice needs a project type with its sections, fields and phases defined in the Customs Editor. Changes made there apply to every project of that type. The types are drafted from the old system’s data, tested with a few real cases, and only then is the bulk load run.

  2. One contact card per person

    Contacts are held as contact cards. A doctor or adjuster who appears on many projects is best loaded as one card, not one for each project. Duplicates in the old system are merged before loading where they can be identified. Loading them as they are produces several cards for the same person, and staff then pick the wrong one when adding a party.

  3. Lists become collection items

    Anything the old system held as a list against a matter, such as providers, liens, insurance policies or expenses, is loaded as items in a collection section. Each column needs a matching field. Totals per project are compared with the old system afterwards, since those figures feed the settlement and disbursal sheets.

  4. History goes into the feed

    File notes, emails and completed tasks from the old system are loaded into the activity feed with their original dates and authors. Authors must exist as users or be recorded in the text. The feed is long on an old case, so staff are shown how to filter it before go-live.

  5. Billing is a separate switch

    The Billing section only appears once Billing is enabled for the firm. Time entries, invoices and trust balances from the old system need that in place before they can be loaded. A firm that leaves it off can still record case costs in a collection section built for the purpose.

More about moving into Filevine

How NewLaw runs it

Four steps, in this order.

Trust money moves on this route, so the trust cutover gets a rehearsal of its own.

  1. Analysis

    We read what Tabs3 holds and how its records link, then agree with you, field by field, where each piece will sit in Filevine. Anything with no place there comes across as a note or stays behind, and you see which before the move.

  2. Clean-up

    Duplicate contacts and matters are merged where they can be identified, and inconsistent entries are put into one format, in Tabs3, before extraction. It is not always possible to find every one, so some may carry across.

  3. Trial load

    The data is loaded into Filevine as a trial and checked against Tabs3: record counts, trust and debtor totals, the links between records, document dates. Exceptions are listed for you to decide.

  4. Cutover

    Changes in Tabs3 are frozen for an agreed window, the data is collected a final time and Filevine goes live over a weekend. The trust and financial cutover is rehearsed on a full trial load first, because it cannot be re-run the way a document load can. Tabs3 is kept read only as the fall-back record.

Fixed price, agreed after the analysis. How NewLaw moves legal data

Start

Start this migration

Tell us what is in Tabs3 and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.

Step 1 of 5

Step 1 of 5: Start with the route

Moving fromTabs3
Moving toFilevine

The route comes from this page. Four short steps follow. Nothing you send commits your firm to anything.

What happens after you send it

  1. A free first call

    We go through your answers with you and ask about anything they leave open.

  2. An analysis of what Tabs3 holds

    What is in it, how its records link, and where each piece would sit in Filevine. Anything with no place there comes across as a note or stays behind, and you see which before the move.

  3. A fixed price in writing

    Set after the analysis, so it reflects what is in your data. You have it before any work starts.

Beyond the data

Setting up Filevine

Loaded data is not yet a working system. This is what NewLaw sets up in Filevine, beyond the migration, so that people can work in it from the first day.

Filevine arrives as a platform to be configured, and most of the implementation is design. Someone has to decide what a project looks like for each kind of work the firm does, what moves it from one phase to the next, and who can see what. Those decisions are made with the people who run the files, then built and tested.

Set-up decisions in Filevine

  • Design project types, sections and fields for each practice area
  • Define phases and the tasks each phase should trigger
  • Build document templates that fill from project fields
  • Set teams, permissions and protected sections for restricted matters
  • Decide whether Billing and Payments are switched on
  • Connect Lead Docket so signed leads become projects

Questions

Tabs3 to Filevine: what firms ask

We only have Tabs3 Billing and PracticeMaster. Is that a problem?

No. It means trust and the general ledger are kept in some other program, and that program is added to the plan. The move covers what Tabs3 holds, and the analysis names the other systems that have to agree with it at cutover.

Can we keep the client dot matter numbering?

If the destination allows a firm-set matter number, the full ID can be kept as it is, decimal point included. Where clients and matters are numbered separately, the two halves go into their own fields. Either way the original ID stays searchable, because it is printed on years of statements.

How are the modules extracted together?

From one copy of the working directory, taken at one moment, so billing, trust and ledger all describe the same day. Taking them at different times is how totals end up disagreeing. For the final cutover the copy is taken after month-end procedures are run and before anyone posts again.

Do trust balances in Tabs3 have a place in Filevine?

In part. Trust accounts sit in Payments by Filevine. Loading history is confirmed in the analysis. The analysis sets out which trust records have a place in Filevine and which are kept as an archive, and the trust cutover is rehearsed on a full trial load before the real one.

Does everything in Tabs3 have a place in Filevine?

Most of it does on paper. The firm’s accounts could not be confirmed from the two products’ own material, so those are checked in the analysis. Anything that turns out to have no place in Filevine is kept as a readable archive, and you see which before the move.

What has to be decided before Tabs3 data is loaded into Filevine?

Time entries, billing records, trust ledgers, custom fields, templates and intake records are carried with mapping, so each mapping is agreed with you first. The firm’s accounts are confirmed in the analysis. The firm also sets the cutover date and how much financial history comes across as live records.

Where to start

Before and after the move.

Choosing the system comes before a migration. Setting it up and putting AI to work come after.

How we do itDiscovery to rollout, step by step

Tabs3 and Filevine are the names and marks of their owners, used here only to identify the two systems.

Moving from Tabs3 to Filevine?

Tell us what you are moving. You get a plan and a fixed price after the analysis.

We reply within one business day.