Skip to content
NEWLAW.COM
+61 1300 495 281
Let’s talk

Data migration route

BillQuick to Filevine migration

BillQuick is a desktop accounting and billing system, and Filevine is a cloud case management system. Only part of what BillQuick holds has a place in a case file: clients and jobs move, and the table shows how much of the billing side does.

FromBillQuickDesktop
  1. Matters: Carried across
  2. Contacts: Carried across
  3. Tasks: Carried across
  4. Time and expenses: Carried with mapping
  5. Billing: Carried with mapping
  6. Trust money: Carried with mapping
  7. Custom fields: Carried with mapping
  8. Templates: Carried with mapping
  9. Documents: Confirmed in the analysis
  10. Emails: Confirmed in the analysis
  11. Notes: Confirmed in the analysis
  12. Calendar: Confirmed in the analysis
  13. Firm accounts: Confirmed in the analysis
ToFilevineCloud
  • 3 carried
  • 5 mapped
  • 5 to confirm
What the two products hold. The analysis confirms it field by field.

What moves

What moves from BillQuick to Filevine

Each row is a kind of record BillQuick holds, whether Filevine has a place for it, and what is planned. On this route three kinds of record carry across, five kinds need mapping and five kinds are confirmed in the analysis.

Records in BillQuick and their place in Filevine
RecordIn BillQuickIn FilevineWhat is planned
MattersMatters or cases, with their numbers, types, parties and statusHeld in partWork is tracked as projects under clients; there is no matter record as such.Has a placeLoaded as projects of a defined project type.Carried across
ContactsClients, other parties and referrersHeldClients with a contact each, employees and vendors.Has a placeContact cards, linked to projects.Carried across
DocumentsFiles stored in or linked from the systemTo be confirmedHas a placeDocs section with folders. Templated project folders can be set per type.Confirmed in the analysis
EmailsEmails saved to matters or to the storeTo be confirmedHas a placeHeld in the activity feed of the project.Confirmed in the analysis
NotesFile notes, matter notes and contact notesTo be confirmedHas a placeHeld as notes in the activity feed.Confirmed in the analysis
CalendarAppointments, court dates and deadlinesTo be confirmedHas a placeDeadlines and calendar events.Confirmed in the analysis
TasksTo-dos and workflow steps assigned to peopleHeld in partTask allocation, forecasting and Gantt charts on projects.Has a placeCarried across
Time and expensesTime and expense entries, billed and unbilledHeldTime cards, timesheets, timers and expense sheets, with submit and approve.Has a place in partNeeds the Billing product enabled.Carried with mapping
BillingInvoices, payments and debtor balancesHeldManual, batch and joint invoices, statements, payments and credit memos.Has a place in partNeeds the Billing product enabled.Carried with mapping
Trust moneyTrust or client account ledgers and balancesHeld in partRetainers are tracked against clients; no trust ledger appears in BQE’s feature list.Has a place in partTrust accounts sit in Payments by Filevine. Loading history is confirmed in the analysis.Carried with mapping
Firm accountsGeneral ledger, office account and payablesHeldChart of accounts, vendor bills, checks, general journal and reconciliation.To be confirmedConfirmed in the analysis
Custom fieldsFields and record types the firm added itselfHeld in partCustom labels, plus custom report and invoice templates.Has a placeCustom sections and fields per project type.Carried with mapping
TemplatesPrecedents, document templates and automationHeld in partInvoice and report templates only.Has a place in partTemplates are rebuilt as Filevine document templates. They are not converted.Carried with mapping

What the plans mean

Carried across
Filevine has a place for this kind of record. It is loaded there and checked against BillQuick.
Carried with mapping
Filevine holds this differently, or in part. Each field or value is matched to its place before loading, and you see the mapping first.
Confirmed in the analysis
We could not confirm this from the two products’ own material, so it is checked against your data before the plan is fixed.

The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.

This kind of move

Clients and jobs move. The books stay books.

An accounting or billing system and a case management system overlap less than firms expect. BillQuick knows clients, jobs, time and invoices. Filevine knows cases, parties, documents and deadlines. The client list moves well, and jobs can seed the case list. Time and invoice history has a place only where the case system has a billing side, and the table above shows whether this one does. A general ledger does not belong in a case system.

So the plan has two halves. Records with a place in Filevine are loaded and checked there. The rest is exported from BillQuick as reports and ledgers that open without it, and the firm decides where its accounts run from then on. If BillQuick is staying as the accounting system, nothing financial needs to move at all, and the job is to line up client and case numbers so the two can be reconciled.

BillQuick runs on the firm’s own equipment, so the data is collected there: a copy of the database and the folders its documents sit in, taken with the firm’s IT provider or over a remote session. Filevine is hosted by its maker, so loading depends on the import tools and access it provides. The old machine is kept, read only, as the fall-back record.

Where the data is now

BillQuick has no matters. A law office that used it has been treating projects as matters, with its own habits about how they were named and numbered. Moving to a legal practice system means turning each client and project into a client and matter, and deciding what to do with the accounting that BillQuick may also have been doing.

  1. One project, one matter

    Every time entry and invoice hangs off a project under a client. Project names and IDs follow whatever convention the firm adopted, so some will carry a matter number, some a description, and a few will cover several pieces of work. Each project is mapped to one matter before any time or billing is loaded.

  2. Activity and expense items

    Time is recorded against activity items and costs against expense items, each with its own tax setting. A legal system expects activity codes or task codes in their place. The item list is usually longer than anyone remembers, so it is cut down and mapped before the trial load.

  3. Contract types and fee schedules

    BillQuick bills a project according to its contract type and can apply a fee schedule, a budget and a billing schedule. Hourly work is the simple case. Fixed fee and recurring arrangements need a matching billing set-up in the destination, or the next invoice will be calculated differently from the last.

  4. Retainers and retainage

    Client retainers are held as retainer balances, and some firms also used retainage on invoices. Neither is a trust ledger. Where retainer money is in fact client money, each balance is reconciled to the bank account that holds it before it is opened as trust in the new system.

  5. Was it the firm’s ledger?

    The program has a chart of accounts, vendor bills, cheque writing and bank reconciliation, and it can also pass data to QuickBooks Desktop or Sage 50. Which of those the firm relied on decides where the general ledger history is taken from. That is checked in the data, not assumed.

More about moving off BillQuick

Where it is going

Loading a firm into Filevine depends on the project types being built first. Until the sections and fields exist there is nowhere for the data to go, so configuration and migration are planned together. The old system’s parties, insurers, providers and key dates are mapped to sections, and its notes and emails are loaded into each project’s activity feed.

  1. Project types before data

    Each area of practice needs a project type with its sections, fields and phases defined in the Customs Editor. Changes made there apply to every project of that type. The types are drafted from the old system’s data, tested with a few real cases, and only then is the bulk load run.

  2. One contact card per person

    Contacts are held as contact cards. A doctor or adjuster who appears on many projects is best loaded as one card, not one for each project. Duplicates in the old system are merged before loading where they can be identified. Loading them as they are produces several cards for the same person, and staff then pick the wrong one when adding a party.

  3. Lists become collection items

    Anything the old system held as a list against a matter, such as providers, liens, insurance policies or expenses, is loaded as items in a collection section. Each column needs a matching field. Totals per project are compared with the old system afterwards, since those figures feed the settlement and disbursal sheets.

  4. History goes into the feed

    File notes, emails and completed tasks from the old system are loaded into the activity feed with their original dates and authors. Authors must exist as users or be recorded in the text. The feed is long on an old case, so staff are shown how to filter it before go-live.

  5. Billing is a separate switch

    The Billing section only appears once Billing is enabled for the firm. Time entries, invoices and trust balances from the old system need that in place before they can be loaded. A firm that leaves it off can still record case costs in a collection section built for the purpose.

More about moving into Filevine

How NewLaw runs it

Four steps, in this order.

Trust money moves on this route, so the trust cutover gets a rehearsal of its own.

  1. Analysis

    We read what BillQuick holds and how its records link, then agree with you, field by field, where each piece will sit in Filevine. Anything with no place there comes across as a note or stays behind, and you see which before the move.

  2. Clean-up

    Duplicate contacts and matters are merged where they can be identified, and inconsistent entries are put into one format, in BillQuick, before extraction. It is not always possible to find every one, so some may carry across.

  3. Trial load

    The data is loaded into Filevine as a trial and checked against BillQuick: record counts, trust and debtor totals, the links between records, document dates. Exceptions are listed for you to decide.

  4. Cutover

    Changes in BillQuick are frozen for an agreed window, the data is collected a final time and Filevine goes live over a weekend. The trust and financial cutover is rehearsed on a full trial load first, because it cannot be re-run the way a document load can. BillQuick is kept read only as the fall-back record.

Fixed price, agreed after the analysis. How NewLaw moves legal data

Start

Start this migration

Tell us what is in BillQuick and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.

Step 1 of 5

Step 1 of 5: Start with the route

Moving fromBillQuick
Moving toFilevine

The route comes from this page. Four short steps follow. Nothing you send commits your firm to anything.

What happens after you send it

  1. A free first call

    We go through your answers with you and ask about anything they leave open.

  2. An analysis of what BillQuick holds

    What is in it, how its records link, and where each piece would sit in Filevine. Anything with no place there comes across as a note or stays behind, and you see which before the move.

  3. A fixed price in writing

    Set after the analysis, so it reflects what is in your data. You have it before any work starts.

Beyond the data

Setting up Filevine

Loaded data is not yet a working system. This is what NewLaw sets up in Filevine, beyond the migration, so that people can work in it from the first day.

Filevine arrives as a platform to be configured, and most of the implementation is design. Someone has to decide what a project looks like for each kind of work the firm does, what moves it from one phase to the next, and who can see what. Those decisions are made with the people who run the files, then built and tested.

Set-up decisions in Filevine

  • Design project types, sections and fields for each practice area
  • Define phases and the tasks each phase should trigger
  • Build document templates that fill from project fields
  • Set teams, permissions and protected sections for restricted matters
  • Decide whether Billing and Payments are switched on
  • Connect Lead Docket so signed leads become projects

Questions

BillQuick to Filevine: what firms ask

We used BillQuick projects as matters. Will that carry over?

It will, as long as each project maps to one matter. The client stays the client, the project becomes the matter, and the project ID is kept as the matter number or as a reference. Projects that held several pieces of work under one name are split during clean-up, before extraction.

Can unbilled time come across?

Unbilled time and expenses can be read with their dates, staff member, hours and description. Whether they arrive as live unbilled entries depends on the destination accepting time at the original rates. The alternative is to bill everything possible before cutover and bring the remainder across as a short list.

Is BillQuick still supported?

BQE counts BillQuick among its legacy products and describes BQE CORE as the next step for existing users. Whether BillQuick itself is still supported should be confirmed with BQE. For a firm moving to a legal system the practical point is to keep the BillQuick company file and a working installation as the read only record.

Do trust balances in BillQuick have a place in Filevine?

In part. Trust accounts sit in Payments by Filevine. Loading history is confirmed in the analysis. The analysis sets out which trust records have a place in Filevine and which are kept as an archive, and the trust cutover is rehearsed on a full trial load before the real one.

Does everything in BillQuick have a place in Filevine?

Most of it does on paper. Documents, emails, notes, calendar entries and the firm’s accounts could not be confirmed from the two products’ own material, so those are checked in the analysis. Anything that turns out to have no place in Filevine is kept as a readable archive, and you see which before the move.

What has to be decided before BillQuick data is loaded into Filevine?

Time entries, billing records, trust ledgers, custom fields and templates are carried with mapping, so each mapping is agreed with you first. Documents, emails, notes, calendar entries and the firm’s accounts are confirmed in the analysis. The firm also sets the cutover date and how much financial history comes across as live records.

Where to start

Before and after the move.

Choosing the system comes before a migration. Setting it up and putting AI to work come after.

How we do itDiscovery to rollout, step by step

BillQuick and Filevine are the names and marks of their owners, used here only to identify the two systems.

Moving from BillQuick to Filevine?

Tell us what you are moving. You get a plan and a fixed price after the analysis.

We reply within one business day.