Skip to content
NEWLAW.COM
+61 1300 495 281
Let’s talk

Data migration route

Bill4Time to Filevine migration

Bill4Time is a cloud accounting and billing system, and Filevine is a cloud case management system. Only part of what Bill4Time holds has a place in a case file: clients and jobs move, and the table shows how much of the billing side does.

FromBill4TimeCloud
  1. Matters: Carried across
  2. Contacts: Carried across
  3. Documents: Carried across
  4. Notes: Carried across
  5. Calendar: Carried across
  6. Tasks: Carried across
  7. Time and expenses: Carried with mapping
  8. Billing: Carried with mapping
  9. Trust money: Carried with mapping
  10. Templates: Carried with mapping
  11. Emails: Confirmed in the analysis
  12. Custom fields: Confirmed in the analysis
  13. Intake: Confirmed in the analysis
ToFilevineCloud
  • 6 carried
  • 4 mapped
  • 3 to confirm
What the two products hold. The analysis confirms it field by field.

What moves

What moves from Bill4Time to Filevine

Each row is a kind of record Bill4Time holds, whether Filevine has a place for it, and what is planned. On this route six kinds of record carry across, four kinds need mapping and three kinds are confirmed in the analysis.

Records in Bill4Time and their place in Filevine
RecordIn Bill4TimeIn FilevineWhat is planned
MattersMatters or cases, with their numbers, types, parties and statusHeldThe level under a client; firms may label it matter, case, project or engagement.Has a placeLoaded as projects of a defined project type.Carried across
ContactsClients, other parties and referrersHeldClients, with the contacts recorded under each.Has a placeContact cards, linked to projects.Carried across
DocumentsFiles stored in or linked from the systemHeldFiles stored against contacts and matters; Box and NetDocuments can be connected.Has a placeDocs section with folders. Templated project folders can be set per type.Carried across
EmailsEmails saved to matters or to the storeTo be confirmedHas a placeHeld in the activity feed of the project.Confirmed in the analysis
NotesFile notes, matter notes and contact notesHeldHas a placeHeld as notes in the activity feed.Carried across
CalendarAppointments, court dates and deadlinesHeld in partScheduled items sync with Google Calendar or Outlook Calendar.Has a placeDeadlines and calendar events.Carried across
TasksTo-dos and workflow steps assigned to peopleHeldHas a placeCarried across
Time and expensesTime and expense entries, billed and unbilledHeldTime and expenses with custom rates, expense categories and billing codes.Has a place in partNeeds the Billing product enabled.Carried with mapping
BillingInvoices, payments and debtor balancesHeldBatch invoicing, LEDES, payment plans and write-offs.Has a place in partNeeds the Billing product enabled.Carried with mapping
Trust moneyTrust or client account ledgers and balancesHeldOperating and trust funds are kept apart on invoices and reports.Has a place in partTrust accounts sit in Payments by Filevine. Loading history is confirmed in the analysis.Carried with mapping
Custom fieldsFields and record types the firm added itselfTo be confirmedHas a placeCustom sections and fields per project type.Confirmed in the analysis
TemplatesPrecedents, document templates and automationHeld in partInvoice templates; document templates were not confirmed.Has a place in partTemplates are rebuilt as Filevine document templates. They are not converted.Carried with mapping
IntakeLeads, enquiries, intake forms and pipelinesTo be confirmedHas a place in partLeads belong in Lead Docket, which passes signed clients to Filevine.Confirmed in the analysis

What the plans mean

Carried across
Filevine has a place for this kind of record. It is loaded there and checked against Bill4Time.
Carried with mapping
Filevine holds this differently, or in part. Each field or value is matched to its place before loading, and you see the mapping first.
Confirmed in the analysis
We could not confirm this from the two products’ own material, so it is checked against your data before the plan is fixed.

The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.

This kind of move

Clients and jobs move. The books stay books.

An accounting or billing system and a case management system overlap less than firms expect. Bill4Time knows clients, jobs, time and invoices. Filevine knows cases, parties, documents and deadlines. The client list moves well, and jobs can seed the case list. Time and invoice history has a place only where the case system has a billing side, and the table above shows whether this one does. A general ledger does not belong in a case system.

So the plan has two halves. Records with a place in Filevine are loaded and checked there. The rest is exported from Bill4Time as reports and ledgers that open without it, and the firm decides where its accounts run from then on. If Bill4Time is staying as the accounting system, nothing financial needs to move at all, and the job is to line up client and case numbers so the two can be reconciled.

Both are hosted by their makers, so nothing is collected from the firm’s office. What can be taken out of Bill4Time depends on its export tools and on what its maker provides on request, and that is confirmed during the analysis, before a date is set. The subscription to Bill4Time is kept running until the checks on Filevine are finished.

Where the data is now

Most of what a firm has built up in Bill4Time is financial: years of time entries, invoices, payments and trust movements, coded the way its clients require. A move off it is judged by whether those figures arrive intact and still add up by client and matter. The practice management records around them are usually thinner and take less of the effort.

  1. Billing codes clients expect

    Firms that bill insurers or corporate clients set up billing codes and expense categories so that LEDES invoices are accepted. Those code lists are the firm’s own. They are extracted as reference data and matched to the destination’s codes before any time entry is loaded, since an unmatched code can cause an e-billing rejection later.

  2. QuickBooks already has copies

    The connector has been sending invoices and payments to QuickBooks, where clients appear as customers. If the new system also posts to that QuickBooks file, it must be told about the existing customers and open invoices. Otherwise the first sync creates a second set. The accountant agrees the mapping before go-live.

  3. Client first, then matter

    Everything is filed under a client and then a matter, and firms rename that second level to suit themselves. A consultancy arm may call it a project. The analysis records the label in use and checks whether non-legal projects are mixed in with matters, because they may not belong in a legal system.

  4. Calendars synced with Outlook

    Where the Google Calendar or Outlook Calendar connection is switched on, scheduled meetings, tasks and time entries pass between the two. Those appointments already exist in the mail system, which is not changing, so they are not loaded twice. Deadlines kept only as Bill4Time tasks are the items that need to be carried across.

  5. Rates for past and future

    Bill4Time lets a firm set its own rates alongside its expense categories and billing codes. When time is loaded into a new system the historic entries keep the rate they were billed at. The rate tables for future work are a separate job, rebuilt in the destination and tested by raising a draft invoice on a known matter.

More about moving off Bill4Time

Where it is going

Loading a firm into Filevine depends on the project types being built first. Until the sections and fields exist there is nowhere for the data to go, so configuration and migration are planned together. The old system’s parties, insurers, providers and key dates are mapped to sections, and its notes and emails are loaded into each project’s activity feed.

  1. Project types before data

    Each area of practice needs a project type with its sections, fields and phases defined in the Customs Editor. Changes made there apply to every project of that type. The types are drafted from the old system’s data, tested with a few real cases, and only then is the bulk load run.

  2. One contact card per person

    Contacts are held as contact cards. A doctor or adjuster who appears on many projects is best loaded as one card, not one for each project. Duplicates in the old system are merged before loading where they can be identified. Loading them as they are produces several cards for the same person, and staff then pick the wrong one when adding a party.

  3. Lists become collection items

    Anything the old system held as a list against a matter, such as providers, liens, insurance policies or expenses, is loaded as items in a collection section. Each column needs a matching field. Totals per project are compared with the old system afterwards, since those figures feed the settlement and disbursal sheets.

  4. History goes into the feed

    File notes, emails and completed tasks from the old system are loaded into the activity feed with their original dates and authors. Authors must exist as users or be recorded in the text. The feed is long on an old case, so staff are shown how to filter it before go-live.

  5. Billing is a separate switch

    The Billing section only appears once Billing is enabled for the firm. Time entries, invoices and trust balances from the old system need that in place before they can be loaded. A firm that leaves it off can still record case costs in a collection section built for the purpose.

More about moving into Filevine

How NewLaw runs it

Four steps, in this order.

Trust money moves on this route, so the trust cutover gets a rehearsal of its own.

  1. Analysis

    We read what Bill4Time holds and how its records link, then agree with you, field by field, where each piece will sit in Filevine. Anything with no place there comes across as a note or stays behind, and you see which before the move.

  2. Clean-up

    Duplicate contacts and matters are merged where they can be identified, and inconsistent entries are put into one format, in Bill4Time, before extraction. It is not always possible to find every one, so some may carry across.

  3. Trial load

    The data is loaded into Filevine as a trial and checked against Bill4Time: record counts, trust and debtor totals, the links between records, document dates. Exceptions are listed for you to decide.

  4. Cutover

    Changes in Bill4Time are frozen for an agreed window, the data is collected a final time and Filevine goes live over a weekend. The trust and financial cutover is rehearsed on a full trial load first, because it cannot be re-run the way a document load can. Bill4Time is kept read only as the fall-back record.

Fixed price, agreed after the analysis. How NewLaw moves legal data

Start

Start this migration

Tell us what is in Bill4Time and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.

Step 1 of 5

Step 1 of 5: Start with the route

Moving fromBill4Time
Moving toFilevine

The route comes from this page. Four short steps follow. Nothing you send commits your firm to anything.

What happens after you send it

  1. A free first call

    We go through your answers with you and ask about anything they leave open.

  2. An analysis of what Bill4Time holds

    What is in it, how its records link, and where each piece would sit in Filevine. Anything with no place there comes across as a note or stays behind, and you see which before the move.

  3. A fixed price in writing

    Set after the analysis, so it reflects what is in your data. You have it before any work starts.

Beyond the data

Setting up Filevine

Loaded data is not yet a working system. This is what NewLaw sets up in Filevine, beyond the migration, so that people can work in it from the first day.

Filevine arrives as a platform to be configured, and most of the implementation is design. Someone has to decide what a project looks like for each kind of work the firm does, what moves it from one phase to the next, and who can see what. Those decisions are made with the people who run the files, then built and tested.

Set-up decisions in Filevine

  • Design project types, sections and fields for each practice area
  • Define phases and the tasks each phase should trigger
  • Build document templates that fill from project fields
  • Set teams, permissions and protected sections for restricted matters
  • Decide whether Billing and Payments are switched on
  • Connect Lead Docket so signed leads become projects

Questions

Bill4Time to Filevine: what firms ask

Can we bring all our old invoices, or only what is still owed?

That depends on the destination. Some systems load paid invoices as history. Others accept open balances only, with the old invoices saved as PDFs on each matter. In both cases the debtor total in the new system is checked against the Bill4Time aged receivables report on the cutover date.

We keep documents in NetDocuments, connected to Bill4Time. Do they move?

They can stay where they are. NetDocuments holds the files and Bill4Time only links matters to them. If the new practice system also connects to NetDocuments, the links are re-made matter by matter. Files uploaded directly into Bill4Time are a different case and are extracted with the matter.

How are trust balances moved?

As an opening balance for each client and matter, agreed with the trust bank statement on the day. The transaction history behind each balance moves too where the destination accepts it. A full trial load is done beforehand as a dress rehearsal, because a trust cutover cannot be re-run the way a document load can.

Do trust balances in Bill4Time have a place in Filevine?

In part. Trust accounts sit in Payments by Filevine. Loading history is confirmed in the analysis. The analysis sets out which trust records have a place in Filevine and which are kept as an archive, and the trust cutover is rehearsed on a full trial load before the real one.

Does everything in Bill4Time have a place in Filevine?

Most of it does on paper. Emails, custom fields and intake records could not be confirmed from the two products’ own material, so those are checked in the analysis. Anything that turns out to have no place in Filevine is kept as a readable archive, and you see which before the move.

What has to be decided before Bill4Time data is loaded into Filevine?

Time entries, billing records, trust ledgers and templates are carried with mapping, so each mapping is agreed with you first. Emails, custom fields and intake records are confirmed in the analysis. The firm also sets the cutover date and how much financial history comes across as live records.

Where to start

Before and after the move.

Choosing the system comes before a migration. Setting it up and putting AI to work come after.

How we do itDiscovery to rollout, step by step

Bill4Time and Filevine are the names and marks of their owners, used here only to identify the two systems.

Moving from Bill4Time to Filevine?

Tell us what you are moving. You get a plan and a fixed price after the analysis.

We reply within one business day.