Skip to content
NEWLAW.COM
+61 1300 495 281
Let’s talk

Data migration route

USB drives to SmartAdvocate migration

USB drives are plain files on equipment the firm controls, and SmartAdvocate is a cloud case management system for personal injury work. The move is matching each file in USB drives to its case in SmartAdvocate.

FromUSB drivesFiles
  1. Documents: Carried across
  2. Emails: Carried across
ToSmartAdvocateCloud
  • 2 carried
What the two products hold. The analysis confirms it field by field.

What moves

What moves from USB drives to SmartAdvocate

Each row is a kind of record USB drives hold, whether SmartAdvocate has a place for it, and what is planned. On this route two kinds of record carry across.

Records in USB drives and their place in SmartAdvocate
RecordIn USB drivesIn SmartAdvocateWhat is planned
DocumentsFiles stored in or linked from the systemHeldLoose files and folders; no sharing, versions or access control on FAT formats.Has a placeDocuments page, by category and subcategory.Carried across
EmailsEmails saved to matters or to the storeHeld in partSaved message files or copied Outlook data files, where someone put them there.Has a placeEmails are attached to cases.Carried across

What the plans mean

Carried across
SmartAdvocate has a place for this kind of record. It is loaded there and checked against USB drives.

The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.

This kind of move

Every document goes to the case it belongs to.

A case management system expects each document to sit on a case, usually in a category such as correspondence, medical records or court documents. USB drives organise files its own way, by profile or by folder. So the move needs two rules: which case a file belongs to, and which category it goes in. The first comes from client and matter references or folder names. The second comes from a document type or a subfolder, and where neither exists the files arrive uncategorised and are marked as such.

Cases must exist in SmartAdvocate before documents can be attached to them. If the system is already live, files are matched to its case list and the unmatched ones are reported. If it is new, the case list is created first. Dates, authors and file names are kept. Email comes across as message files. Where several versions of a document exist, the firm chooses between loading the latest and loading them all.

With USB drives the files are already on equipment the firm controls, so there is no export step: they are read where they are. Upload speed sets the pace for a large store. The originals stay in place, unchanged, until the firm has checked the copy in SmartAdvocate.

Where the data is now

Each USB drive is its own small puzzle, and the first task is to say what it is. A working copy of matter files is handled one way. The backup of an old practice system is a database to be restored, not a set of documents. Material received from a client belongs to one matter and may need to be kept exactly as it was received.

  1. Identify each drive first

    Every drive is labelled and listed, and its contents are classed as loose documents, a system backup, or third-party material for a known matter. A stick holding a .bak or other backup file goes to whoever is handling that old system, because the documents inside cannot be reached by copying.

  2. Copy once, then put it away

    Flash drives can fail without warning, and each reading is a small risk. It is safer to copy a drive once and do the sorting and matching on the copy than to keep going back to the stick. How the copy is made and checked is agreed with the firm’s IT provider, and the drive goes back in the safe.

  3. Times shift on FAT drives

    FAT file systems store times in local time and record the modified time only to the nearest two seconds. The same document on a stick and on the server can show dates an hour apart after a daylight saving change. Matching dates is therefore an unreliable way to find duplicates on these drives.

  4. Encrypted drives need their password

    A drive protected with BitLocker To Go or a hardware keypad opens only with its password or recovery key. Where the person who set it has left, the firm’s IT provider may hold a recovery key. If nobody does, the contents cannot be read, and that is recorded against the drive.

  5. Material from clients and other parties

    Drives received in a matter are evidence of what was handed over. The original folder structure and file dates are preserved in the copy, and the files are filed to the matter as a set under the date received. What happens to the physical drive, kept or returned, follows the firm’s own file rules.

More about moving off USB drives

Where it is going

SmartAdvocate keeps injury detail in structured fields and screens, so mapping counts for more than usual: the more precisely the old data is placed, the more of those screens are filled on the first day. Parties, incidents, insurers, providers and bills are loaded to their own screens, and the vendor’s implementation team runs conversions into it.

  1. Map to fields, not notes

    The case summary, dashboards and settlement screen read from structured fields. Injury details, insurance limits and provider bills dumped into a note leave those screens empty. The mapping takes each old field to its SmartAdvocate counterpart, and only what truly has no counterpart is loaded as a note.

  2. Case types and statuses

    Cases are loaded against case types and statuses that drive WorkPlans and reports. These are agreed with the firm before the trial load, and old statuses are translated to the new list. A status with no match is not guessed at. It is listed, and someone who knows the files decides.

  3. Document categories

    Documents are searched by category, subcategory, sender, recipient and date as well as by folder. The old system’s folders are translated into categories on the way in. Files that arrive uncategorised can still be found by description, but they fall outside the category views staff are trained to use.

  4. Working with the vendor’s conversion

    SmartAdvocate’s implementation team converts client data into the system and trains staff through its own classes. The firm’s side of that is supplying a clean source, checking the converted cases against the old system, and deciding what to do with the exceptions. Independent help is used on those tasks.

  5. Choosing Server or Cloud

    The firm decides before loading whether it will run the Server edition on its own Windows server or use the hosted Cloud edition. Either way the data load is the same. What differs is who looks after backups, updates and remote access afterwards, and that is settled with the firm’s IT provider.

More about moving into SmartAdvocate

How NewLaw runs it

Four steps, in this order.

Nothing financial lands in SmartAdvocate on this route, which makes it repeatable: a load can be run again until it is right. The maker of SmartAdvocate says that it, or its partners, load firms into the product. Where the firm uses that service, NewLaw’s part is the work around it: the analysis, the clean-up in USB drives and checking each trial against USB drives.

  1. Analysis

    We read what USB drives hold and how it is organised, then agree with you where each kind of record will sit in SmartAdvocate. Anything with no place there stays behind or is archived, and you see which before the move.

  2. Clean-up

    Duplicate clients, matters and folders are merged where they can be identified, and naming is put into one format, before anything is copied. It is not always possible to find every one, so some may carry across.

  3. Trial load

    A trial is loaded into SmartAdvocate and checked against USB drives: record and file counts, the links between records, document dates, and a sample opened by your own people. Exceptions are listed for you to decide.

  4. Cutover

    There is no financial cutover on this route. After a short freeze on changes in USB drives, a final pass over a weekend picks up what changed since the trial. USB drives are kept read only as the fall-back record.

Fixed price, agreed after the analysis. How NewLaw moves legal data

Start

Start this migration

Tell us what is in USB drives and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.

Step 1 of 5

Step 1 of 5: Start with the route

Moving fromUSB drives
Moving toSmartAdvocate

The route comes from this page. Four short steps follow. Nothing you send commits your firm to anything.

What happens after you send it

  1. A free first call

    We go through your answers with you and ask about anything they leave open.

  2. An analysis of what USB drives holds

    What is in it, how its records link, and where each piece would sit in SmartAdvocate. Anything with no place there comes across as a note or stays behind, and you see which before the move.

  3. A fixed price in writing

    Set after the analysis, so it reflects what is in your data. You have it before any work starts.

Beyond the data

Setting up SmartAdvocate

Loaded data is not yet a working system. The maker of SmartAdvocate runs or arranges the set-up of its product, so this is what has to be decided and put in place in SmartAdvocate, whoever does the work, before people rely on it from the first day.

Setting up SmartAdvocate is a matter of deciding how much of its detail the firm will use from the start. Case types, statuses and WorkPlans come first because they drive everything else. Templates follow. The vendor trains staff through its own classes, and the decisions below are best made before the first of those.

Set-up decisions in SmartAdvocate

  • Choose the Server or Cloud edition with IT
  • Define case types, statuses and staff roles
  • Build WorkPlans and Automated Procedures for each case type
  • Convert letters and forms into templates with merge codes
  • Install the Outlook plugin and agree email filing habits
  • Set up intake screens, lead sources and dashboards

Questions

USB drives to SmartAdvocate: what firms ask

We have a box of old USB drives and no idea what is on them. Is it worth including them?

Usually it is worth the listing, which is quick. Each drive is summarised: how many files, what kinds, what date range, which client names appear. The firm then chooses which drives are loaded, which are kept as they are, and which hold nothing but copies of files already on the server.

One drive has a backup from the system we used ten years ago. Can that be brought in?

Possibly. It depends on whether the backup can be restored, which needs a copy of the old software or a database engine that reads its format. That is tested on its own before any promise is made. If it restores, its matters and documents are treated like any other source system.

Is it safe to plug unknown drives into our network?

That is a question for the firm’s IT provider, and the cautious answer is no. A drive of unknown origin can carry malicious software as well as documents. How unknown drives are read, and on which machine, is agreed with the IT provider before any of them is opened.

Do documents from USB drives keep their folders and dates in SmartAdvocate?

SmartAdvocate stores documents. Documents page, by category and subcategory. Each file is placed under the client and matter it came from, and created and modified dates are carried, so a document still shows when it was written. The trial load is checked by count and by opening a sample.

Does everything in USB drives have a place in SmartAdvocate?

On paper, yes: each kind of record USB drives hold has a place in SmartAdvocate. Whether every field fits is a separate question, and the analysis answers it field by field. Anything with no place comes across as a note or stays behind, and you see which before the move.

What has to be decided before USB drives data is loaded into SmartAdvocate?

Less than on most routes: each kind of record here either carries across or is archived. The firm also decides which closed matters and how many versions of a document are in scope.

Where to start

Before and after the move.

Choosing the system comes before a migration. Setting it up and putting AI to work come after.

How we do itDiscovery to rollout, step by step

USB drives and SmartAdvocate are the names and marks of their owners, used here only to identify the two systems.

Moving from USB drives to SmartAdvocate?

Tell us what you are moving. You get a plan and a fixed price after the analysis.

We reply within one business day.