Skip to content
NEWLAW.COM
+61 1300 495 281
Let’s talk

Data migration route

Tabs3 Accounts Payable data to Microsoft SQL Server

Tabs3 Accounts Payable is a server-based accounting and billing system, and Microsoft SQL Server is a database on a server the firm runs. This is not a move to a new working system: the route writes out what Tabs3 Accounts Payable holds and keeps it readable and open to queries.

FromTabs3 Accounts PayableServer
  1. Contacts: Exported in full
  2. Firm accounts: Exported in full
  3. Notes: Confirmed in the analysis
  4. Custom fields: Confirmed in the analysis
  5. Templates: Confirmed in the analysis
ToMicrosoft SQL ServerServer
  • 2 carried
  • 3 to confirm
What the two products hold. The analysis confirms it field by field.

What moves

What moves from Tabs3 Accounts Payable to Microsoft SQL Server

Each row is a kind of record Tabs3 Accounts Payable holds, whether Microsoft SQL Server has a place for it, and what is planned. On this route two kinds of record carry across and three kinds are confirmed in the analysis.

Records in Tabs3 Accounts Payable and their place in Microsoft SQL Server
RecordIn Tabs3 Accounts PayableIn Microsoft SQL ServerWhat is planned
ContactsClients, other parties and referrersHeld in partVendors.Has a placePeople and companies, with their roles on each matter.Exported in full
NotesFile notes, matter notes and contact notesTo be confirmedHas a placeRows of text linked to matters and contacts.Confirmed in the analysis
Firm accountsGeneral ledger, office account and payablesHeldVendor invoices, cheques and EFTs, recurring entries and 1099s; posts to Tabs3 General Ledger.Has a placeGeneral ledger journals and balances, where the source held them.Exported in full
Custom fieldsFields and record types the firm added itselfTo be confirmedHas a placeAs added columns, or a table of field names and values.Confirmed in the analysis
TemplatesPrecedents, document templates and automationTo be confirmedHas a place in partPrecedent files can be stored; automation does not run here.Confirmed in the analysis

What the plans mean

Exported in full
Microsoft SQL Server has a place for this kind of record. It is loaded there and checked against Tabs3 Accounts Payable.
Confirmed in the analysis
We could not confirm this from the two products’ own material, so it is checked against your data before the plan is fixed.

The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.

This kind of move

Not a new system. A complete copy the firm can query.

Writing Tabs3 Accounts Payable out to Microsoft SQL Server is not a migration into a new working system. Nobody will open a matter there on Monday morning. The aim is a complete, faithful copy that can be queried and reported on after the old system is gone. So the rules change. Nothing is cleaned or merged unless the firm asks, because an archive should show the records as they were. Every table and field is carried, including those a new system would have had no place for.

What makes an archive usable is the description that goes with it. The export is delivered with a plain account of each table: what it holds, how it joins to the others, what the codes mean. Record counts and financial totals are agreed to the reports in Tabs3 Accounts Payable as at the export date, so the archive can stand as the record. Documents are exported beside the data with a table linking each file to its matter. Access is restricted, since the archive holds everything the live system did.

Both ends are on equipment the firm controls, so the work is done on the firm’s own network with its IT provider. Disk space for a second full copy is checked first. The original in Tabs3 Accounts Payable stays untouched until the copy in Microsoft SQL Server has been checked.

Where the data is now

Payables is a small module with a narrow job, and moving it is mostly a question of where it goes. Few practice management systems pay suppliers, so the vendor list, unpaid invoices and recurring bills usually land in the firm’s accounting package. What has to be right on the day is the list of unpaid invoices and the payables balance in the ledger.

  1. It rarely has a twin

    Practice systems mostly leave supplier bills to Xero, QuickBooks or a similar package. So this module’s data usually goes to a different destination from the matters. The analysis names that destination, and the vendor list is set up there before unpaid invoices are loaded against it.

  2. Unposted items

    Invoices and cheques are entered first and posted to the general ledger later, by running the post programs. Anything entered but not yet posted is in payables and not in the ledger. All postings are run before the final extraction, so the unpaid invoice list and the ledger’s payables account agree.

  3. Vendor numbers and key length

    Vendors are numbered, and the firm set the key length in the module’s customisation. Other accounting packages identify suppliers by name or by their own code. The Tabs3 vendor number is kept as a reference on each supplier, so earlier payments can still be traced back.

  4. Recurring entries

    Rent, subscriptions and other regular bills are stored as recurring entries that the firm posts each period. They are not invoices yet, so they do not appear on the unpaid list. Each one is recreated as a recurring bill in the destination, with its next due date checked against the last one posted in Tabs3.

  5. 1099 totals mid-year

    The module produces 1099 forms from the year’s vendor payments and can combine them with trust payees. If the move happens during a tax year, year-to-date payments per vendor are carried across as figures, so the forms can be produced from one place in January.

More about moving off Tabs3 Accounts Payable

Where it is going

There are two ways to put a retired system into SQL Server, and they suit different firms. The old system’s own database can be restored as it is. Or the data can be loaded into a new set of tables designed to be read by people. The first is quicker and harder to use. Which suits is worked out in the analysis, and the choice is the firm’s.

  1. Restored copy or rebuilt schema

    Where the old practice system already kept its data in SQL Server, a backup can be restored onto a new server. The tables keep the vendor’s names and codes, which can be cryptic, and reading them takes someone who knows that product’s database. A rebuilt schema uses plain names such as Matter and TrustTransaction.

  2. No screens come with it

    A database has no matter screen. Someone has to ask it questions in SQL or through a reporting tool. Saved views can be set up for the things the firm will really look up: a matter with its parties, its ledger, its time entries and its list of documents. Which are worth having is agreed in the analysis.

  3. Documents sit beside the database

    Files are normally kept in folders on the same server, with a table recording each document’s matter, title, dates and path. Storing the files inside the database is possible but makes it far larger. On the Express edition, the cap on database size rules that out for most firms’ document stores.

  4. The edition follows the size

    A firm’s tables may fit within the Express limit once documents are kept outside the database. A long trust and time history at a larger firm may not. The size of the source data is measured in the analysis, and the edition is chosen from that figure with the firm’s IT provider.

  5. Backups and a test restore

    An archive that is never backed up is one disk failure from gone. Backups belong to the firm’s IT provider: a full one once the load is finished, and a schedule if anything is still being added. It is worth restoring one to a second machine as a test, because a backup that has never been restored is only a hope.

More about moving into Microsoft SQL Server

How NewLaw runs it

Four steps, in this order.

This route produces an archive, not a working system, so the steps are about completeness and proof.

  1. Analysis

    We read what Tabs3 Accounts Payable holds, table by table, and agree with you what the copy in Microsoft SQL Server must be able to answer later. Everything Tabs3 Accounts Payable holds is in scope unless you take it out.

  2. Clean-up, if you want it

    An archive should show the records as they were, so nothing is merged or corrected unless you ask. Where the copy is also meant for reporting, duplicate and inconsistent entries are tidied in a working copy and the original values are kept beside them.

  3. Trial export

    The data is written to Microsoft SQL Server as a trial and checked against Tabs3 Accounts Payable: record counts, totals where Tabs3 Accounts Payable holds money, the links between records, and a sample of documents opened from the export. Exceptions are listed for you to decide.

  4. Final export

    After the last day of work in Tabs3 Accounts Payable, the export is run a final time and checked again. There is nothing to go live. Tabs3 Accounts Payable is kept read only until you are satisfied the copy answers what you need, and it is handed over with a written description of its contents.

Fixed price, agreed after the analysis. How NewLaw moves legal data

Start

Start this migration

Tell us what is in Tabs3 Accounts Payable and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.

Step 1 of 5

Step 1 of 5: Start with the route

Moving fromTabs3 Accounts Payable
Moving toMicrosoft SQL Server

The route comes from this page. Four short steps follow. Nothing you send commits your firm to anything.

What happens after you send it

  1. A free first call

    We go through your answers with you and ask about anything they leave open.

  2. An analysis of what Tabs3 Accounts Payable holds

    What is in it, how its records link, and where each piece would sit in Microsoft SQL Server. Anything with no place there comes across as a note or stays behind, and you see which before the move.

  3. A fixed price in writing

    Set after the analysis, so it reflects what is in your data. You have it before any work starts.

Beyond the data

Structure, permissions and handover

Microsoft SQL Server is a place to keep data, not a system staff work in each day. What is agreed is how the data is laid out, who can reach it, and what is handed over with it.

Standing up SQL Server as an archive is IT work shared with the firm’s provider. A server or instance is chosen, logins are created for the few people who need to read the data, and nobody is given rights to change it. Views and a handful of reports are built for the common questions, and the IT provider owns the backup routine.

What is agreed and set up

  • Server, instance and edition agreed with the IT provider
  • Read-only logins and roles for named staff
  • Views for matter, ledger, time and document look-ups
  • Backup schedule and who tests a restore
  • Plain names and descriptions for tables and columns
  • Excel or Power BI connected for reporting

Questions

Tabs3 Accounts Payable to Microsoft SQL Server: what firms ask

Do paid invoices need to come across?

Usually not as transactions. Paid supplier invoices are already reflected in the ledger balances. Firms keep the paid history readable in Tabs3 and carry over open invoices, the vendor list and the current year’s payment totals. If the accountant wants prior-year detail in the new package, that is agreed during the analysis.

Where do client costs paid through payables go?

A supplier invoice for a client’s matter is both a payable and a cost to recover. In the new set-up the supplier side goes to the accounting package and the recoverable cost goes to the matter as an unbilled disbursement. Open items are checked on both sides, so none is paid twice or left unbilled.

Can payables move before the rest of Tabs3?

It can, because suppliers do not depend on the matter data. Where the module is integrated with Tabs3 General Ledger, though, every invoice and cheque posts there. If the ledger is moving to a new package, payables moves with it at the same period end, or someone posts by hand in between.

Does the copy in Microsoft SQL Server hold contacts from Tabs3 Accounts Payable?

Yes. People and companies, with their roles on each matter. Contacts are written out with the rest, and counts and totals are agreed to the reports in Tabs3 Accounts Payable as at the export date.

Does everything in Tabs3 Accounts Payable have a place in Microsoft SQL Server?

Most of it does on paper. Notes, custom fields and templates could not be confirmed from the two products’ own material, so those are checked in the analysis. Anything that turns out to have no place in Microsoft SQL Server is kept as a readable archive, and you see which before the move.

What has to be decided before Tabs3 Accounts Payable is written out to Microsoft SQL Server?

Notes, custom fields and templates are confirmed in the analysis. The firm also decides who may open the archive and how long it is kept.

Where to start

Before and after the move.

Choosing the system comes before a migration. Setting it up and putting AI to work come after.

How we do itDiscovery to rollout, step by step

Tabs3 Accounts Payable and Microsoft SQL Server are the names and marks of their owners, used here only to identify the two systems.

Moving from Tabs3 Accounts Payable to Microsoft SQL Server?

Tell us what you are moving. You get a plan and a fixed price after the analysis.

We reply within one business day.