Skip to content
NEWLAW.COM
+61 1300 495 281
Let’s talk

Data migration route

Tabs3 Accounts Payable to Litify migration

Tabs3 Accounts Payable is a server-based accounting and billing system, and Litify is a cloud case management system. Only part of what Tabs3 Accounts Payable holds has a place in a case file: clients and jobs move, and the table shows how much of the billing side does.

FromTabs3 Accounts PayableServer
  1. Contacts: Carried across
  2. Notes: Confirmed in the analysis
  3. Firm accounts: Confirmed in the analysis
  4. Custom fields: Confirmed in the analysis
  5. Templates: Confirmed in the analysis
ToLitifyCloud
  • 1 carried
  • 4 to confirm
What the two products hold. The analysis confirms it field by field.

What moves

What moves from Tabs3 Accounts Payable to Litify

Each row is a kind of record Tabs3 Accounts Payable holds, whether Litify has a place for it, and what is planned. On this route one kind of record carries across and four kinds are confirmed in the analysis.

Records in Tabs3 Accounts Payable and their place in Litify
RecordIn Tabs3 Accounts PayableIn LitifyWhat is planned
ContactsClients, other parties and referrersHeld in partVendors.Has a placeLoaded as parties and connected by roles.Carried across
NotesFile notes, matter notes and contact notesTo be confirmedTo be confirmedConfirmed in the analysis
Firm accountsGeneral ledger, office account and payablesHeldVendor invoices, cheques and EFTs, recurring entries and 1099s; posts to Tabs3 General Ledger.To be confirmedConfirmed in the analysis
Custom fieldsFields and record types the firm added itselfTo be confirmedHas a placeCustom fields are created before loading.Confirmed in the analysis
TemplatesPrecedents, document templates and automationTo be confirmedHas a place in partTemplates are rebuilt in Litify’s document generation.Confirmed in the analysis

What the plans mean

Carried across
Litify has a place for this kind of record. It is loaded there and checked against Tabs3 Accounts Payable.
Confirmed in the analysis
We could not confirm this from the two products’ own material, so it is checked against your data before the plan is fixed.

The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.

This kind of move

Clients and jobs move. The books stay books.

An accounting or billing system and a case management system overlap less than firms expect. Tabs3 Accounts Payable knows clients, jobs, time and invoices. Litify knows cases, parties, documents and deadlines. The client list moves well, and jobs can seed the case list. Time and invoice history has a place only where the case system has a billing side, and the table above shows whether this one does. A general ledger does not belong in a case system.

So the plan has two halves. Records with a place in Litify are loaded and checked there. The rest is exported from Tabs3 Accounts Payable as reports and ledgers that open without it, and the firm decides where its accounts run from then on. If Tabs3 Accounts Payable is staying as the accounting system, nothing financial needs to move at all, and the job is to line up client and case numbers so the two can be reconciled.

Tabs3 Accounts Payable runs on the firm’s own equipment, so the data is collected there: a copy of the database and the folders its documents sit in, taken with the firm’s IT provider or over a remote session. Litify is hosted by its maker, so loading depends on the import tools and access it provides. The old machine is kept, read only, as the fall-back record.

Where the data is now

Payables is a small module with a narrow job, and moving it is mostly a question of where it goes. Few practice management systems pay suppliers, so the vendor list, unpaid invoices and recurring bills usually land in the firm’s accounting package. What has to be right on the day is the list of unpaid invoices and the payables balance in the ledger.

  1. It rarely has a twin

    Practice systems mostly leave supplier bills to Xero, QuickBooks or a similar package. So this module’s data usually goes to a different destination from the matters. The analysis names that destination, and the vendor list is set up there before unpaid invoices are loaded against it.

  2. Unposted items

    Invoices and cheques are entered first and posted to the general ledger later, by running the post programs. Anything entered but not yet posted is in payables and not in the ledger. All postings are run before the final extraction, so the unpaid invoice list and the ledger’s payables account agree.

  3. Vendor numbers and key length

    Vendors are numbered, and the firm set the key length in the module’s customisation. Other accounting packages identify suppliers by name or by their own code. The Tabs3 vendor number is kept as a reference on each supplier, so earlier payments can still be traced back.

  4. Recurring entries

    Rent, subscriptions and other regular bills are stored as recurring entries that the firm posts each period. They are not invoices yet, so they do not appear on the unpaid list. Each one is recreated as a recurring bill in the destination, with its next due date checked against the last one posted in Tabs3.

  5. 1099 totals mid-year

    The module produces 1099 forms from the year’s vendor payments and can combine them with trust payees. If the move happens during a tax year, year-to-date payments per vendor are carried across as figures, so the forms can be produced from one place in January.

More about moving off Tabs3 Accounts Payable

Where it is going

Loading a firm into Litify is done inside a Salesforce environment that has been configured for that firm, normally by Litify or one of its implementation partners. The data work fits around that project. Old records are mapped to parties, roles, intakes and matters and loaded into the Salesforce objects behind them, and documents are loaded separately and attached.

  1. The design comes first

    Case types, stages and page layouts are decided during discovery, before any load. A load into a half-configured environment has to be repeated when a field changes. The data mapping is written against the agreed design and updated whenever the design moves, so the two stay in step.

  2. One party, many roles

    Contacts from the old system become parties, and each appearance on a matter becomes a role. Duplicate contacts turn into duplicate parties with their roles divided between them. Duplicates are merged before the load where they can be identified, since separating them afterwards means pointing every role at the right party again.

  3. Open enquiries load as intakes

    Leads and enquiries that have not signed belong in intakes, not matters. They are loaded with their source and status so that conversion reports start from a true position. Old declined enquiries are loaded only if the firm wants them for conflict checking, and are marked so they do not count as live.

  4. Documents load after records

    Files are loaded into the document component once the matters exist, because each one is attached to a matter record. Folder structure is set per case type beforehand. Large injury files with medical records and video take time to transfer, and that time is planned into the cutover weekend.

  5. Validation rules reject bad rows

    A configured environment enforces required fields and validation rules, and old data seldom satisfies all of them. Rows that fail are reported by the load. They are fixed in the source and run again, or the rule is relaxed for migrated records, and the firm decides which for each rule.

More about moving into Litify

How NewLaw runs it

Four steps, in this order.

No financial cutover is planned on this route, so a load can be run again until it is right. If the analysis finds financial records with a place in Litify, they get a rehearsed cutover of their own. The maker of Litify says that it, or its partners, load firms into the product. Where the firm uses that service, NewLaw’s part is the work around it: the analysis, the clean-up in Tabs3 Accounts Payable and checking each trial against Tabs3 Accounts Payable.

  1. Analysis

    We read what Tabs3 Accounts Payable holds and how it is organised, then agree with you where each kind of record will sit in Litify. Anything with no place there stays behind or is archived, and you see which before the move.

  2. Clean-up

    Duplicate clients, matters and folders are merged where they can be identified, and naming is put into one format, before anything is copied. It is not always possible to find every one, so some may carry across.

  3. Trial load

    A trial is loaded into Litify and checked against Tabs3 Accounts Payable: record and file counts, the links between records, document dates, and a sample opened by your own people. Exceptions are listed for you to decide.

  4. Cutover

    After a short freeze on changes in Tabs3 Accounts Payable, a final pass over a weekend picks up what changed since the trial. If the analysis found financial records to move, their cutover is rehearsed on a full trial load first. Tabs3 Accounts Payable is kept read only as the fall-back record.

Fixed price, agreed after the analysis. How NewLaw moves legal data

Start

Start this migration

Tell us what is in Tabs3 Accounts Payable and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.

Step 1 of 5

Step 1 of 5: Start with the route

Moving fromTabs3 Accounts Payable
Moving toLitify

The route comes from this page. Four short steps follow. Nothing you send commits your firm to anything.

What happens after you send it

  1. A free first call

    We go through your answers with you and ask about anything they leave open.

  2. An analysis of what Tabs3 Accounts Payable holds

    What is in it, how its records link, and where each piece would sit in Litify. Anything with no place there comes across as a note or stays behind, and you see which before the move.

  3. A fixed price in writing

    Set after the analysis, so it reflects what is in your data. You have it before any work starts.

Beyond the data

Setting up Litify

Loaded data is not yet a working system. The maker of Litify runs or arranges the set-up of its product, so this is what has to be decided and put in place in Litify, whoever does the work, before people rely on it from the first day.

A Litify implementation is a configuration project on Salesforce, run by Litify or an implementation partner with the firm’s own project team. Discovery sessions with each department come first. The decisions that follow shape the system: what an intake asks, how a matter moves through its stages, who sees what, and which other systems are connected.

Set-up decisions in Litify

  • Define intake questionnaires and the rules for conversion
  • Set case types, matter stages and page layouts
  • Build matter plans that create tasks at each stage
  • Design document folders and generation templates per case type
  • Configure user roles and sharing for restricted matters
  • Decide on timekeeping, billing and accounting integrations

Questions

Tabs3 Accounts Payable to Litify: what firms ask

Do paid invoices need to come across?

Usually not as transactions. Paid supplier invoices are already reflected in the ledger balances. Firms keep the paid history readable in Tabs3 and carry over open invoices, the vendor list and the current year’s payment totals. If the accountant wants prior-year detail in the new package, that is agreed during the analysis.

Where do client costs paid through payables go?

A supplier invoice for a client’s matter is both a payable and a cost to recover. In the new set-up the supplier side goes to the accounting package and the recoverable cost goes to the matter as an unbilled disbursement. Open items are checked on both sides, so none is paid twice or left unbilled.

Can payables move before the rest of Tabs3?

It can, because suppliers do not depend on the matter data. Where the module is integrated with Tabs3 General Ledger, though, every invoice and cheque posts there. If the ledger is moving to a new package, payables moves with it at the same period end, or someone posts by hand in between.

Do contacts from Tabs3 Accounts Payable arrive in Litify without duplicates?

Litify has a place for contacts. Loaded as parties and connected by roles. Duplicates are merged in Tabs3 Accounts Payable before extraction where they can be identified, and the list is matched against contacts already in Litify. It is not always possible to find every one, so some may carry across.

Does everything in Tabs3 Accounts Payable have a place in Litify?

Most of it does on paper. Notes, the firm’s accounts, custom fields and templates could not be confirmed from the two products’ own material, so those are checked in the analysis. Anything that turns out to have no place in Litify is kept as a readable archive, and you see which before the move.

What has to be decided before Tabs3 Accounts Payable data is loaded into Litify?

Notes, the firm’s accounts, custom fields and templates are confirmed in the analysis. The firm also decides which closed matters and how many versions of a document are in scope.

Where to start

Before and after the move.

Choosing the system comes before a migration. Setting it up and putting AI to work come after.

How we do itDiscovery to rollout, step by step

Tabs3 Accounts Payable and Litify are the names and marks of their owners, used here only to identify the two systems.

Moving from Tabs3 Accounts Payable to Litify?

Tell us what you are moving. You get a plan and a fixed price after the analysis.

We reply within one business day.