Data migration route
Tabs3 Accounts Payable to LexWorkplace migration
Tabs3 Accounts Payable is a server-based accounting and billing system, and LexWorkplace is a cloud document management system. Only files and their details have a place there, so this route carries the documents and archives the rest.
Tabs3 Accounts PayableServer- Notes: Confirmed in the analysis
- Custom fields: Confirmed in the analysis
- Templates: Confirmed in the analysis
LexWorkplaceCloud- Contacts: Kept as a readable archive
- Firm accounts: Kept as a readable archive
- 3 to confirm
- 2 archived
What moves
What moves from Tabs3 Accounts Payable to LexWorkplace
Each row is a kind of record Tabs3 Accounts Payable holds, whether LexWorkplace has a place for it, and what is planned. On this route two kinds have no place in LexWorkplace and are archived and three kinds are confirmed in the analysis.
| Record | What is planned | ||
|---|---|---|---|
| ContactsClients, other parties and referrers | Held in partVendors. | No placeOnly a client name, status, attorneys and tags. | Kept as a readable archive |
| NotesFile notes, matter notes and contact notes | To be confirmed | Has a placeAs Matter Notes on the matter’s Notes tab. | Confirmed in the analysis |
| Firm accountsGeneral ledger, office account and payables | HeldVendor invoices, cheques and EFTs, recurring entries and 1099s; posts to Tabs3 General Ledger. | No place | Kept as a readable archive |
| Custom fieldsFields and record types the firm added itself | To be confirmed | Has a place in partOld categories can become document types, statuses or tags. | Confirmed in the analysis |
| TemplatesPrecedents, document templates and automation | To be confirmed | Has a place in partStored as files in Firm Documents. | Confirmed in the analysis |
What the plans mean
- Confirmed in the analysis
- We could not confirm this from the two products’ own material, so it is checked against your data before the plan is fixed.
- Kept as a readable archive
- LexWorkplace has no place for it. It is exported in a format that opens without Tabs3 Accounts Payable and handed to the firm as a read-only archive.
The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.
This kind of move
Only the documents have a place here.
LexWorkplace is a document management system: it takes files and the details that describe them. Most of what Tabs3 Accounts Payable holds is not files. Entries, balances, settings and lists have no place in a document store, and the table above is short for that reason. What can move is any document Tabs3 Accounts Payable produced or stored: invoices as PDFs, signed agreements, attachments, exported reports. Each is filed under the client or matter it relates to.
The useful version of this job is often an archive. A firm retiring a system wants its records readable later without keeping the subscription or the old PC. The data is exported in open formats, spreadsheets and PDFs, and filed in LexWorkplace in a workspace set aside for it, with access limited to the people who need it. That gives the firm one place to look, under the same retention rules as the rest of its documents.
Tabs3 Accounts Payable runs on the firm’s own equipment, so the data is collected there: a copy of the database and the folders its documents sit in, taken with the firm’s IT provider or over a remote session. LexWorkplace is hosted by its maker, so loading depends on the import tools and access it provides. The old machine is kept, read only, as the fall-back record.
Where the data is now
Leaving Tabs3 Accounts Payable
Payables is a small module with a narrow job, and moving it is mostly a question of where it goes. Few practice management systems pay suppliers, so the vendor list, unpaid invoices and recurring bills usually land in the firm’s accounting package. What has to be right on the day is the list of unpaid invoices and the payables balance in the ledger.
It rarely has a twin
Practice systems mostly leave supplier bills to Xero, QuickBooks or a similar package. So this module’s data usually goes to a different destination from the matters. The analysis names that destination, and the vendor list is set up there before unpaid invoices are loaded against it.
Unposted items
Invoices and cheques are entered first and posted to the general ledger later, by running the post programs. Anything entered but not yet posted is in payables and not in the ledger. All postings are run before the final extraction, so the unpaid invoice list and the ledger’s payables account agree.
Vendor numbers and key length
Vendors are numbered, and the firm set the key length in the module’s customisation. Other accounting packages identify suppliers by name or by their own code. The Tabs3 vendor number is kept as a reference on each supplier, so earlier payments can still be traced back.
Recurring entries
Rent, subscriptions and other regular bills are stored as recurring entries that the firm posts each period. They are not invoices yet, so they do not appear on the unpaid list. Each one is recreated as a recurring bill in the destination, with its next due date checked against the last one posted in Tabs3.
1099 totals mid-year
The module produces 1099 forms from the year’s vendor payments and can combine them with trust payees. If the move happens during a tax year, year-to-date payments per vendor are carried across as figures, so the forms can be produced from one place in January.
Where it is going
Arriving in LexWorkplace
LexWorkplace expects every document and email to belong to a matter, so loading it starts with the matter list: name, custom ID, client, type and dates. Uptime Legal states that it runs migration and onboarding for its customers itself. The preparation is getting the old system’s content into a clean client and matter structure, with the exceptions resolved, ready for that load.
Matters carry little, by design
A matter record holds a name, a custom ID, a client, a type, a location, assigned staff, tags and open and close dates. Parties, court details and financial data have no fields. Those stay in the practice management system, and the two are tied together by using the same matter number as the custom ID.
Clients are only containers
LexWorkplace says plainly that its clients are for grouping matters, not for client management. A client has a name, a status, primary attorneys and tags. Addresses, phone numbers and contact history from the old system are not loaded here. They go to the practice management system or stay behind.
Three tabs per matter
Content arrives as documents, emails or notes, each on its own tab with its own folders. Emails held as message files in an old folder tree have to be recognised and loaded as emails, not as documents, or they will not appear where lawyers look for correspondence.
Closed matters and archive
A matter is closed by giving it a close date, and closed matters can be moved to archive storage, where they keep their place but are not searched or indexed until un-archived. Old matters can therefore be loaded and archived straight away. The firm sets the cut-off year.
Profiling is optional unless enforced
Document type, status and tags are not required by default, though a firm can switch on mandatory profiling for matters. If the old system had document types, they are mapped to LexWorkplace types during the load. If it had none, the firm chooses between loading unprofiled and assigning types by folder name.
How NewLaw runs it
Four steps, in this order.
Nothing financial lands in LexWorkplace on this route, which makes it repeatable: a load can be run again until it is right. The maker of LexWorkplace says that it, or its partners, load firms into the product. Where the firm uses that service, NewLaw’s part is the work around it: the analysis, the clean-up in Tabs3 Accounts Payable and checking each trial against Tabs3 Accounts Payable.
Analysis
We read what Tabs3 Accounts Payable holds and how it is organised, then agree with you where each kind of record will sit in LexWorkplace. Anything with no place there stays behind or is archived, and you see which before the move.
Clean-up
Duplicate clients, matters and folders are merged where they can be identified, and naming is put into one format, before anything is copied. It is not always possible to find every one, so some may carry across.
Trial load
A trial is loaded into LexWorkplace and checked against Tabs3 Accounts Payable: record and file counts, the links between records, document dates, and a sample opened by your own people. Exceptions are listed for you to decide.
Cutover
There is no financial cutover on this route. After a short freeze on changes in Tabs3 Accounts Payable, a final pass over a weekend picks up what changed since the trial. Tabs3 Accounts Payable is kept read only as the fall-back record.
Fixed price, agreed after the analysis. How NewLaw moves legal data
Start
Start this migration
Tell us what is in Tabs3 Accounts Payable and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.
Step 1 of 5
What happens after you send it
- A free first call
We go through your answers with you and ask about anything they leave open.
- An analysis of what Tabs3 Accounts Payable holds
What is in it, how its records link, and where each piece would sit in LexWorkplace. Anything with no place there comes across as a note or stays behind, and you see which before the move.
- A fixed price in writing
Set after the analysis, so it reflects what is in your data. You have it before any work starts.
Beyond the data
Setting up LexWorkplace
Loaded data is not yet a working system. The maker of LexWorkplace runs or arranges the set-up of its product, so this is what has to be decided and put in place in LexWorkplace, whoever does the work, before people rely on it from the first day.
Setting LexWorkplace up for a firm is a short list of decisions made in its settings, plus software on each computer. The decisions are what the firm calls its matter types, document types and statuses, who can open which matters by default, and whether versioning is automatic or manual. The Launcher and the Outlook add-in are then installed for every user.
Set-up decisions in LexWorkplace
- Matter types, document types, statuses and tag conventions
- Groups, rights and default permissions for new matters
- Automatic or manual versioning, and whether profiling is mandatory
- Linking matters to Clio Manage where the firm uses it
- Launcher, Office and Outlook add-ins on each Windows or Mac computer
- A Firm Documents structure for templates, policies and internal files
Questions
Tabs3 Accounts Payable to LexWorkplace: what firms ask
Do paid invoices need to come across?
Usually not as transactions. Paid supplier invoices are already reflected in the ledger balances. Firms keep the paid history readable in Tabs3 and carry over open invoices, the vendor list and the current year’s payment totals. If the accountant wants prior-year detail in the new package, that is agreed during the analysis.
Where do client costs paid through payables go?
A supplier invoice for a client’s matter is both a payable and a cost to recover. In the new set-up the supplier side goes to the accounting package and the recoverable cost goes to the matter as an unbilled disbursement. Open items are checked on both sides, so none is paid twice or left unbilled.
Can payables move before the rest of Tabs3?
It can, because suppliers do not depend on the matter data. Where the module is integrated with Tabs3 General Ledger, though, every invoice and cheque posts there. If the ledger is moving to a new package, payables moves with it at the same period end, or someone posts by hand in between.
Do contacts from Tabs3 Accounts Payable arrive in LexWorkplace without duplicates?
LexWorkplace has no place for contacts. Only a client name, status, attorneys and tags. The contact list from Tabs3 Accounts Payable is exported as a spreadsheet and kept as a readable archive.
What happens to records LexWorkplace has no place for?
On this route that is contacts and the firm’s accounts. They are exported from Tabs3 Accounts Payable in formats that open without it, spreadsheets and PDFs, and handed to the firm as a read-only archive. You see the list before the move.
What has to be decided before Tabs3 Accounts Payable data is loaded into LexWorkplace?
Notes, custom fields and templates are confirmed in the analysis. The firm also decides which closed matters and how many versions of a document are in scope.
Other routes
Other routes from Tabs3 Accounts Payable and into LexWorkplace
Other destinations from Tabs3 Accounts Payable
Other systems that move into LexWorkplace
Where to start
Before and after the move.
Choosing the system comes before a migration. Setting it up and putting AI to work come after.
Choose your systems
Technology stack selection
Decide which practice management system your firm runs, with the evidence and the cost beside it.
About four weeks for a firm of about 15 people. Fixed price, set after a free first call.
Move your data
Data migration
Your data is cleaned up before anything moves, then a trial load is checked against the old system.
Fixed price, agreed after the analysis.
Set up your new system
Implementation
Your new system set up around the way your firm works: configuration, document automation and training.
A small firm of 1 to 10 users typically takes 4 to 8 weeks. A mid-sized firm of 10 to 50 users takes 8 to 16 weeks.
Put AI to work
AI advisory and enablement
A small group of your people learn to use an approved AI tool on real work, under written rules.
Two to four weeks for a small first group. Fixed price, set after a free first call.
Tabs3 Accounts Payable and LexWorkplace are the names and marks of their owners, used here only to identify the two systems.
Moving from Tabs3 Accounts Payable to LexWorkplace?
Tell us what you are moving. You get a plan and a fixed price after the analysis.
We reply within one business day.