Skip to content
NEWLAW.COM
+61 1300 495 281
Let’s talk

Data migration route

Pika CMS to SmartAdvocate migration

Pika CMS is a case management system for legal aid work, and SmartAdvocate is a cloud case management system for personal injury work. The records line up case for case, and the detail is in the fields and stages.

FromPika CMSCase management
  1. Matters: Carried across
  2. Contacts: Carried across
  3. Documents: Carried across
  4. Notes: Carried across
  5. Calendar: Carried across
  6. Tasks: Carried across
  7. Time and expenses: Carried across
  8. Intake: Carried across
  9. Emails: Confirmed in the analysis
  10. Custom fields: Confirmed in the analysis
  11. Templates: Confirmed in the analysis
ToSmartAdvocateCloud
  • 8 carried
  • 3 to confirm
What the two products hold. The analysis confirms it field by field.

What moves

What moves from Pika CMS to SmartAdvocate

Each row is a kind of record Pika CMS holds, whether SmartAdvocate has a place for it, and what is planned. On this route eight kinds of record carry across and three kinds are confirmed in the analysis.

Records in Pika CMS and their place in SmartAdvocate
RecordIn Pika CMSIn SmartAdvocateWhat is planned
MattersMatters or cases, with their numbers, types, parties and statusHeldCases, opened from an intake.Has a placeCases by case type, with master and member relationships.Carried across
ContactsClients, other parties and referrersHeldClients, opposing parties and other contacts linked to cases.Has a placeCarried across
DocumentsFiles stored in or linked from the systemHeld in partFile upload is documented for the later OCM release; what an older install holds varies.Has a placeDocuments page, by category and subcategory.Carried across
EmailsEmails saved to matters or to the storeTo be confirmedHas a placeEmails are attached to cases.Confirmed in the analysis
NotesFile notes, matter notes and contact notesHeldCase notes.Has a placeCarried across
CalendarAppointments, court dates and deadlinesHeldAppointments and dated reminders.Has a placeAppointments and critical deadlines.Carried across
TasksTo-dos and workflow steps assigned to peopleHeldTicklers, which are reminders with a due date.Has a placeCarried across
Time and expensesTime and expense entries, billed and unbilledHeldTimeslips recorded against cases.Has a placeTracked time entries.Carried across
Custom fieldsFields and record types the firm added itselfTo be confirmedOpen-source code that a program could extend; confirmed per installation.Has a place in partConfirmed in the analysis for each field with no standard home.Confirmed in the analysis
TemplatesPrecedents, document templates and automationTo be confirmedHas a place in partTemplates are rebuilt with SmartAdvocate merge codes.Confirmed in the analysis
IntakeLeads, enquiries, intake forms and pipelinesHeldIntake with eligibility screening comes before a case is opened.Has a placeIntake and lead records.Carried across

What the plans mean

Carried across
SmartAdvocate has a place for this kind of record. It is loaded there and checked against Pika CMS.
Confirmed in the analysis
We could not confirm this from the two products’ own material, so it is checked against your data before the plan is fixed.

The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.

This kind of move

Case to case, field by field.

Two case management systems look alike from a distance and differ in almost every detail. Each has its own idea of a case type, a stage, a party role and a deadline. Pika CMS and SmartAdvocate may both hold a limitation date, yet one calculates it and the other stores what was typed. The mapping goes field by field and status by status, and the trial load is checked by opening real cases in both systems side by side.

Custom fields hold most of what the firm has built up. Years of intake answers, injury details or visa histories sit in fields the firm added itself. Each is matched to a field in SmartAdvocate, and anything unmatched is kept as a note on the case so that it can still be searched. Workflows and document templates are rebuilt in the new system’s own tools. Open tasks come across with their owners and due dates.

How Pika CMS is run at the firm is settled at the start of the analysis, because its maker’s own material does not settle it. The usual arrangement is assumed here. Pika CMS runs on the firm’s own equipment, so the data is collected there: a copy of the database and the folders its documents sit in, taken with the firm’s IT provider or over a remote session. SmartAdvocate is hosted by its maker, so loading depends on the import tools and access it provides. The old machine is kept, read only, as the fall-back record.

Where the data is now

A program still on Pika is running open-source software that has since been continued under other names. The first question is which version is installed and who looks after it, because any program was free to change the code. The data is a MySQL database on a server somebody controls, and the work starts by finding out what that particular installation holds.

  1. Which Pika is it

    The names are confusing: Pika, OCM, Open Case Management and Ciprocity are one line of software at different dates. A site that says it uses Pika may be on an old release or on a later one that kept the old name on screen. The version is read from the installation itself before any mapping is planned.

  2. Code the program changed itself

    Because the licence is open, a program or its contractor could add fields, screens and reports directly in the code. Those additions are in no manual. The database is compared table by table with a standard installation, and anything extra is traced to the screen that fills it so its meaning is understood before it is mapped.

  3. A server someone must find

    The application and its MySQL database run on a web server, sometimes in the program’s office and sometimes with a hosting company arranged years ago. Access to that server, and to wherever uploaded files are kept, has to be confirmed early. Staff changes mean the person who set it up has often left.

  4. Funding and problem codes

    Legal services programs code each case by legal problem and by the grant that pays for it, and report to funders from those codes. A general practice system has a matter type and little else. The code lists are carried across as they are, with their history, so that past reporting periods can still be reproduced.

More about moving off Pika CMS

Where it is going

SmartAdvocate keeps injury detail in structured fields and screens, so mapping counts for more than usual: the more precisely the old data is placed, the more of those screens are filled on the first day. Parties, incidents, insurers, providers and bills are loaded to their own screens, and the vendor’s implementation team runs conversions into it.

  1. Map to fields, not notes

    The case summary, dashboards and settlement screen read from structured fields. Injury details, insurance limits and provider bills dumped into a note leave those screens empty. The mapping takes each old field to its SmartAdvocate counterpart, and only what truly has no counterpart is loaded as a note.

  2. Case types and statuses

    Cases are loaded against case types and statuses that drive WorkPlans and reports. These are agreed with the firm before the trial load, and old statuses are translated to the new list. A status with no match is not guessed at. It is listed, and someone who knows the files decides.

  3. Document categories

    Documents are searched by category, subcategory, sender, recipient and date as well as by folder. The old system’s folders are translated into categories on the way in. Files that arrive uncategorised can still be found by description, but they fall outside the category views staff are trained to use.

  4. Working with the vendor’s conversion

    SmartAdvocate’s implementation team converts client data into the system and trains staff through its own classes. The firm’s side of that is supplying a clean source, checking the converted cases against the old system, and deciding what to do with the exceptions. Independent help is used on those tasks.

  5. Choosing Server or Cloud

    The firm decides before loading whether it will run the Server edition on its own Windows server or use the hosted Cloud edition. Either way the data load is the same. What differs is who looks after backups, updates and remote access afterwards, and that is settled with the firm’s IT provider.

More about moving into SmartAdvocate

How NewLaw runs it

Four steps, in this order.

Financial records move on this route, so the balances are rehearsed before the real cutover. The maker of SmartAdvocate says that it, or its partners, load firms into the product. Where the firm uses that service, NewLaw’s part is the work around it: the analysis, the clean-up in Pika CMS and checking each trial against Pika CMS.

  1. Analysis

    We read what Pika CMS holds and how its records link, then agree with you, field by field, where each piece will sit in SmartAdvocate. Anything with no place there comes across as a note or stays behind, and you see which before the move.

  2. Clean-up

    Duplicate contacts and matters are merged where they can be identified, and inconsistent entries are put into one format, in Pika CMS, before extraction. It is not always possible to find every one, so some may carry across.

  3. Trial load

    The data is loaded into SmartAdvocate as a trial and checked against Pika CMS: record counts, financial totals, the links between records, document dates. Exceptions are listed for you to decide.

  4. Cutover

    Changes in Pika CMS are frozen for an agreed window, the data is collected a final time and SmartAdvocate goes live over a weekend. The financial cutover is rehearsed on a full trial load first, so that opening balances agree with the reports in Pika CMS as at the cutover date. Pika CMS is kept read only as the fall-back record.

Fixed price, agreed after the analysis. How NewLaw moves legal data

Start

Start this migration

Tell us what is in Pika CMS and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.

Step 1 of 5

Step 1 of 5: Start with the route

Moving fromPika CMS
Moving toSmartAdvocate

The route comes from this page. Four short steps follow. Nothing you send commits your firm to anything.

What happens after you send it

  1. A free first call

    We go through your answers with you and ask about anything they leave open.

  2. An analysis of what Pika CMS holds

    What is in it, how its records link, and where each piece would sit in SmartAdvocate. Anything with no place there comes across as a note or stays behind, and you see which before the move.

  3. A fixed price in writing

    Set after the analysis, so it reflects what is in your data. You have it before any work starts.

Beyond the data

Setting up SmartAdvocate

Loaded data is not yet a working system. The maker of SmartAdvocate runs or arranges the set-up of its product, so this is what has to be decided and put in place in SmartAdvocate, whoever does the work, before people rely on it from the first day.

Setting up SmartAdvocate is a matter of deciding how much of its detail the firm will use from the start. Case types, statuses and WorkPlans come first because they drive everything else. Templates follow. The vendor trains staff through its own classes, and the decisions below are best made before the first of those.

Set-up decisions in SmartAdvocate

  • Choose the Server or Cloud edition with IT
  • Define case types, statuses and staff roles
  • Build WorkPlans and Automated Procedures for each case type
  • Convert letters and forms into templates with merge codes
  • Install the Outlook plugin and agree email filing habits
  • Set up intake screens, lead sources and dashboards

Questions

Pika CMS to SmartAdvocate: what firms ask

Is Pika the same as OCM and Ciprocity?

They are the same line of software. Pika was the original open-source product. It was continued as Open Case Management, and the current hosted version is called Ciprocity. The record structure is closely related across all three, but an old Pika installation will not have features added later, so each site is assessed as it stands.

Our Pika was customised years ago. Does that matter?

It matters a good deal, and it is manageable. Custom fields and local code changes are found by comparing the database with a standard one. Each is shown to staff who use it, given a destination or marked to stay behind, and included in the trial load so the result can be checked against the old screens.

Can we move from Pika to a commercial practice system?

Cases, contacts, notes and time have places in most systems. Eligibility screening, funding codes and funder reports usually do not. Before choosing, it is worth listing the reports the program must still produce after the move, because that list often decides which kind of system fits.

Do documents from Pika CMS keep their folders and dates in SmartAdvocate?

SmartAdvocate stores documents. Documents page, by category and subcategory. Each file is placed under the client and matter it came from, and created and modified dates are carried, so a document still shows when it was written. The trial load is checked by count and by opening a sample.

Does everything in Pika CMS have a place in SmartAdvocate?

Most of it does on paper. Emails, custom fields and templates could not be confirmed from the two products’ own material, so those are checked in the analysis. Anything that turns out to have no place in SmartAdvocate is kept as a readable archive, and you see which before the move.

What has to be decided before Pika CMS data is loaded into SmartAdvocate?

Emails, custom fields and templates are confirmed in the analysis. The firm also sets the cutover date and how much financial history comes across as live records.

Where to start

Before and after the move.

Choosing the system comes before a migration. Setting it up and putting AI to work come after.

How we do itDiscovery to rollout, step by step

Pika CMS and SmartAdvocate are the names and marks of their owners, used here only to identify the two systems.

Moving from Pika CMS to SmartAdvocate?

Tell us what you are moving. You get a plan and a fixed price after the analysis.

We reply within one business day.