Data migration route
Pika CMS to Lawmatics migration
Pika CMS is a case management system for legal aid work, and Lawmatics is a cloud CRM and intake system. This route carries people and their history into Lawmatics, and the table shows how much of the firm’s files and money has a place there.
- Matters: Carried across
- Contacts: Carried across
- Notes: Carried across
- Calendar: Carried across
- Tasks: Carried across
- Intake: Carried across
- Documents: Carried with mapping
- Time and expenses: Carried with mapping
- Emails: Confirmed in the analysis
- Custom fields: Confirmed in the analysis
- Templates: Confirmed in the analysis
LawmaticsCloud- 6 carried
- 2 mapped
- 3 to confirm
What moves
What moves from Pika CMS to Lawmatics
Each row is a kind of record Pika CMS holds, whether Lawmatics has a place for it, and what is planned. On this route six kinds of record carry across, two kinds need mapping and three kinds are confirmed in the analysis.
| Record | In Pika CMS | What is planned | |
|---|---|---|---|
| MattersMatters or cases, with their numbers, types, parties and status | HeldCases, opened from an intake. | Has a placeLoaded from CSV with a status of PNC, Hired or Lost and a pipeline stage. | Carried across |
| ContactsClients, other parties and referrers | HeldClients, opposing parties and other contacts linked to cases. | Has a placeContacts and companies load from CSV; relationships link further parties to a matter. | Carried across |
| DocumentsFiles stored in or linked from the system | Held in partFile upload is documented for the later OCM release; what an older install holds varies. | Has a place in partFiles and folders on each matter, added by upload or API, not by the spreadsheet import. | Carried with mapping |
| EmailsEmails saved to matters or to the store | To be confirmed | Has a place in partEmails reach a matter through mail sync from a connected mailbox. | Confirmed in the analysis |
| NotesFile notes, matter notes and contact notes | HeldCase notes. | Has a placeNotes on matters, contacts and companies. | Carried across |
| CalendarAppointments, court dates and deadlines | HeldAppointments and dated reminders. | Has a placeAppointments, called events, with types and locations. | Carried across |
| TasksTo-dos and workflow steps assigned to people | HeldTicklers, which are reminders with a due date. | Has a place | Carried across |
| Time and expensesTime and expense entries, billed and unbilled | HeldTimeslips recorded against cases. | Has a place in partTime entries and expenses, where the Time & Billing module is enabled. | Carried with mapping |
| Custom fieldsFields and record types the firm added itself | To be confirmedOpen-source code that a program could extend; confirmed per installation. | Has a placeMatter, contact and company fields. A field must exist before data is imported into it. | Confirmed in the analysis |
| TemplatesPrecedents, document templates and automation | To be confirmed | Has a place in partDocument and email templates are rebuilt with Lawmatics merge fields. | Confirmed in the analysis |
| IntakeLeads, enquiries, intake forms and pipelines | HeldIntake with eligibility screening comes before a case is opened. | Has a placePipelines and stages, marketing sources and campaigns. | Carried across |
What the plans mean
- Carried across
- Lawmatics has a place for this kind of record. It is loaded there and checked against Pika CMS.
- Carried with mapping
- Lawmatics holds this differently, or in part. Each field or value is matched to its place before loading, and you see the mapping first.
- Confirmed in the analysis
- We could not confirm this from the two products’ own material, so it is checked against your data before the plan is fixed.
The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.
This kind of move
People and history move. Files and accounts stay.
A CRM wants to know who the firm knows and what has passed between them. From Pika CMS that means contacts, their roles, their matters as a history of work done, and the referrers who sent them. Loaded into Lawmatics, a past client becomes someone the firm can contact again with that history in view. That is usually the reason for this route: the firm is adding an intake and marketing system beside its matter system, or replacing the front end of it.
A CRM is not usually where documents, time, billing and trust are kept, and the table above shows what Lawmatics takes. What it does not take stays in Pika CMS or its successor. So the plan has to say which system is the master for a contact once both are running, or the two lists drift apart. Contacts are de-duplicated before the load, and anyone who has asked not to be contacted is flagged in Lawmatics from the first day.
How Pika CMS is run at the firm is settled at the start of the analysis, because its maker’s own material does not settle it. The usual arrangement is assumed here. Pika CMS runs on the firm’s own equipment, so the data is collected there: a copy of the database and the folders its documents sit in, taken with the firm’s IT provider or over a remote session. Lawmatics is hosted by its maker, so loading depends on the import tools and access it provides. The old machine is kept, read only, as the fall-back record.
Where the data is now
Leaving Pika CMS
A program still on Pika is running open-source software that has since been continued under other names. The first question is which version is installed and who looks after it, because any program was free to change the code. The data is a MySQL database on a server somebody controls, and the work starts by finding out what that particular installation holds.
Which Pika is it
The names are confusing: Pika, OCM, Open Case Management and Ciprocity are one line of software at different dates. A site that says it uses Pika may be on an old release or on a later one that kept the old name on screen. The version is read from the installation itself before any mapping is planned.
Code the program changed itself
Because the licence is open, a program or its contractor could add fields, screens and reports directly in the code. Those additions are in no manual. The database is compared table by table with a standard installation, and anything extra is traced to the screen that fills it so its meaning is understood before it is mapped.
A server someone must find
The application and its MySQL database run on a web server, sometimes in the program’s office and sometimes with a hosting company arranged years ago. Access to that server, and to wherever uploaded files are kept, has to be confirmed early. Staff changes mean the person who set it up has often left.
Funding and problem codes
Legal services programs code each case by legal problem and by the grant that pays for it, and report to funders from those codes. A general practice system has a matter type and little else. The code lists are carried across as they are, with their history, so that past reporting periods can still be reproduced.
Where it is going
Arriving in Lawmatics
Lawmatics takes matters, contacts and companies from CSV files, and its API accepts notes, tasks, appointments, files, time entries and invoices. It is an intake and client relationship system, so a firm arriving from full practice management has to decide what it is for. People and matters load well. There is no general ledger, and years of billing history have no natural home.
Contacts and matters load separately
The import expects two spreadsheets: one for contacts or companies with no case, such as referrers and other lawyers, and one for matters. A matter import creates the matter and its primary contact together. Every matter has exactly one primary contact, so joint clients are loaded as one primary and one relationship.
Set up before loading
Owner, stage, practice area, source and campaign are matched by name. A value on the spreadsheet that does not match one in Lawmatics exactly creates a new one, which is how a firm ends up with two spellings of the same practice area. Users, pipelines, practice areas and marketing sources are set up first, and custom fields must exist before data is loaded into them.
Statuses and matter numbers
Each imported matter must be PNC (potential new client), Hired or Lost, with open and closed handled as sub-statuses the firm creates. The case number is a system field assigned by an auto-numbering pattern and cannot be edited by hand afterwards. Whether old matter numbers can be loaded into it, or belong in a custom field, is tested in the trial load.
Duplicates are matched by email
With Match Contacts by Email switched on, a contact whose email already exists is skipped or updated, never doubled. Names and phone numbers are not checked. Matters are not deduplicated at all, so two rows with one email create two matters on one contact. Clean-up therefore happens in the spreadsheet, and automations are switched off for every load.
What has no place
There is no general ledger. The Time & Billing module holds time entries, expenses, invoices and a trust account with a running balance per matter, and past invoices are entered as already sent and then marked paid. A firm that needs its full accounting history keeps the old system read only or carries the books in an accounting package.
How NewLaw runs it
Four steps, in this order.
Financial records move on this route, so the balances are rehearsed before the real cutover.
Analysis
We read what Pika CMS holds and how its records link, then agree with you, field by field, where each piece will sit in Lawmatics. Anything with no place there comes across as a note or stays behind, and you see which before the move.
Clean-up
Duplicate contacts and matters are merged where they can be identified, and inconsistent entries are put into one format, in Pika CMS, before extraction. It is not always possible to find every one, so some may carry across.
Trial load
The data is loaded into Lawmatics as a trial and checked against Pika CMS: record counts, financial totals, the links between records, document dates. Exceptions are listed for you to decide.
Cutover
Changes in Pika CMS are frozen for an agreed window, the data is collected a final time and Lawmatics goes live over a weekend. The financial cutover is rehearsed on a full trial load first, so that opening balances agree with the reports in Pika CMS as at the cutover date. Pika CMS is kept read only as the fall-back record.
Fixed price, agreed after the analysis. How NewLaw moves legal data
Start
Start this migration
Tell us what is in Pika CMS and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.
Step 1 of 5
What happens after you send it
- A free first call
We go through your answers with you and ask about anything they leave open.
- An analysis of what Pika CMS holds
What is in it, how its records link, and where each piece would sit in Lawmatics. Anything with no place there comes across as a note or stays behind, and you see which before the move.
- A fixed price in writing
Set after the analysis, so it reflects what is in your data. You have it before any work starts.
Beyond the data
Setting up Lawmatics
Loaded data is not yet a working system. This is what NewLaw sets up in Lawmatics, beyond the migration, so that people can work in it from the first day.
In Lawmatics the design comes before the data. The pipeline stages, practice areas, custom fields and relationship types decide what the import can hold, and the forms and automations decide what the firm’s intake looks like from the first day. If a practice system sits behind it, the field mapping between the two is part of the same job.
Set-up decisions in Lawmatics
- Pipelines and stages for intake and for open matters
- Practice areas, sub-statuses, relationship types and the matter numbering pattern
- Custom fields on matters, contacts and companies
- Intake forms, booking links and e-signature document templates
- Follow-up automations, with marketing sources and campaigns
- Mail and calendar sync, user roles and practice system integration
Questions
Pika CMS to Lawmatics: what firms ask
Is Pika the same as OCM and Ciprocity?
They are the same line of software. Pika was the original open-source product. It was continued as Open Case Management, and the current hosted version is called Ciprocity. The record structure is closely related across all three, but an old Pika installation will not have features added later, so each site is assessed as it stands.
Our Pika was customised years ago. Does that matter?
It matters a good deal, and it is manageable. Custom fields and local code changes are found by comparing the database with a standard one. Each is shown to staff who use it, given a destination or marked to stay behind, and included in the trial load so the result can be checked against the old screens.
Can we move from Pika to a commercial practice system?
Cases, contacts, notes and time have places in most systems. Eligibility screening, funding codes and funder reports usually do not. Before choosing, it is worth listing the reports the program must still produce after the move, because that list often decides which kind of system fits.
Do documents from Pika CMS keep their folders and dates in Lawmatics?
In part. Files and folders on each matter, added by upload or API, not by the spreadsheet import. The structure in Pika CMS is mapped to what Lawmatics offers and you see the mapping before the load. File dates are carried.
Does everything in Pika CMS have a place in Lawmatics?
Most of it does on paper. Emails, custom fields and templates could not be confirmed from the two products’ own material, so those are checked in the analysis. Anything that turns out to have no place in Lawmatics is kept as a readable archive, and you see which before the move.
What has to be decided before Pika CMS data is loaded into Lawmatics?
Documents and time entries are carried with mapping, so each mapping is agreed with you first. Emails, custom fields and templates are confirmed in the analysis. The firm also sets the cutover date and how much financial history comes across as live records.
Other routes
Other routes from Pika CMS and into Lawmatics
Where to start
Before and after the move.
Choosing the system comes before a migration. Setting it up and putting AI to work come after.
Choose your systems
Technology stack selection
Decide which practice management system your firm runs, with the evidence and the cost beside it.
About four weeks for a firm of about 15 people. Fixed price, set after a free first call.
Move your data
Data migration
Your data is cleaned up before anything moves, then a trial load is checked against the old system.
Fixed price, agreed after the analysis.
Set up your new system
Implementation
Your new system set up around the way your firm works: configuration, document automation and training.
A small firm of 1 to 10 users typically takes 4 to 8 weeks. A mid-sized firm of 10 to 50 users takes 8 to 16 weeks.
Put AI to work
AI advisory and enablement
A small group of your people learn to use an approved AI tool on real work, under written rules.
Two to four weeks for a small first group. Fixed price, set after a free first call.
Pika CMS and Lawmatics are the names and marks of their owners, used here only to identify the two systems.
Moving from Pika CMS to Lawmatics?
Tell us what you are moving. You get a plan and a fixed price after the analysis.
We reply within one business day.