Data migration route
LinkedIn to Sync.com migration
LinkedIn is a cloud contacts and calendar tool, and Sync.com is cloud file storage. What moves is the files, plus a readable export of everything else the old system holds.
LinkedInCloud
Sync.comCloud- Contacts: Kept as a readable archive
- 1 archived
What moves
What moves from LinkedIn to Sync.com
Each row is a kind of record LinkedIn holds, whether Sync.com has a place for it, and what is planned. On this route one kind has no place in Sync.com and is archived.
| Record | What is planned | ||
|---|---|---|---|
| ContactsClients, other parties and referrers | Held in partA member’s own first-degree connections: name, profile URL, company, position, date connected. | No place | Kept as a readable archive |
What the plans mean
- Kept as a readable archive
- Sync.com has no place for it. It is exported in a format that opens without LinkedIn and handed to the firm as a read-only archive.
The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.
This kind of move
An export the firm can open without the system.
Sync.com holds files, and most of what LinkedIn holds is records. This route is therefore an export job. Each kind of record is written out in a format that opens without the system it came from: lists as spreadsheets, statements and invoices as PDFs, attachments as the files they were. The export is laid out in folders that make sense to someone who never used LinkedIn, by client or by year, with a short index file saying what is where.
Firms do this when a subscription is ending, when a system is being retired, or to meet a retention rule. The test of the result is whether a question can still be answered from it years later: what was this client invoiced, who signed this agreement and when. So the trial export is checked by asking those questions of it. Totals are agreed to the system’s own reports, and access to the folder in Sync.com is limited before the export is copied in.
Both are hosted by their makers, so nothing is collected from the firm’s office. What can be taken out of LinkedIn depends on its export tools and on what its maker provides on request, and that is confirmed during the analysis, before a date is set. The subscription to LinkedIn is kept running until the checks on Sync.com are finished.
Where the data is now
Leaving LinkedIn
There is no firm-wide export from LinkedIn. Each lawyer requests an archive of their own account and receives a connections file. Those files are combined, checked against the contacts the firm already holds, and loaded as people with a company and a job title. It is a contact list and nothing more, and it is treated as one.
Each lawyer exports their own
The archive is requested from a member’s own settings, on a computer and not the mobile app, and the download link goes to that member’s primary email address and lasts 72 hours. Nobody else can request it for them. The firm collects one connections file per lawyer, and each file is labelled with whose network it is.
Email addresses are often missing
An email address is included only when the connection has chosen to let their connections download it. Many rows have a name, a company and a position, and no way to write to the person. Rows are matched to existing contacts by name and company, and the firm’s own record supplies the address.
Company and title go stale
The company and position columns show what each person’s profile said on the day of the export. People move firms. Where a contact already exists in the destination, the LinkedIn details are shown beside the firm’s own for someone to choose between, and nothing is overwritten without that choice.
Whose contact is it
A partner’s connections are their personal network, and some will not want every name visible to the whole firm. Before anything is loaded the firm decides whether these become shared firm contacts, private contacts of the lawyer, or a marketing list, and which lawyer is recorded as knowing each one.
Names in other scripts
LinkedIn’s help pages say the CSV format does not support every character, and names written in Chinese, Japanese or Hebrew script may not come through. Those rows are found by checking for blank or garbled names once the files are combined, and are corrected by hand from the profile address.
Where it is going
Arriving in Sync.com
A firm that moves its files to Sync is usually doing so for confidentiality, and the load has to respect how the service is built to deliver it. Files are encrypted before they leave the computer. Nobody at Sync can look inside the account to confirm what arrived, so the checking is done from the firm’s side, against the list of what was sent.
Files or Vault
Open matters belong in Files, where they sync to the people working on them. Closed matters can go to Vault, which holds them in the cloud without putting a copy on every laptop. The firm supplies its open and closed matter lists so each folder is sent to the right side.
A 248 character path limit
Sync sets a maximum path length of 248 characters to stay compatible between Windows and Mac, and its apps skip anything longer. That is tighter than most systems a firm will be coming from. Folder names are shortened in the plan, and Sync’s own guidance favours a tree only a few levels deep.
What the apps leave out
The desktop apps do not upload shortcut files, temporary Office files or names containing a slash, and they warn against several other characters on Windows. A copy to Vault produces a transfer report listing what was skipped. That report is reconciled against the source file list after every load.
Permissions come from the top folder
Sharing is set on a folder and flows down to all of its contents. A matter that needs different access from the rest of a client’s work cannot simply sit one level down with tighter settings. It becomes its own shared folder, and those exceptions are identified before the tree is built.
Shared folders count against storage
A shared folder is added to each member’s account and normally counts towards their quota, and it syncs to their computer as a real folder. Sharing the whole client tree with every person can fill both. Shares are sized to teams, and the allowance needed per user is worked out from the document volumes.
How NewLaw runs it
Four steps, in this order.
Nothing financial lands in Sync.com on this route, which makes it repeatable: a load can be run again until it is right.
Analysis
We read what LinkedIn holds and how it is organised, then agree with you where each kind of record will sit in Sync.com. Anything with no place there stays behind or is archived, and you see which before the move.
Clean-up
Duplicate clients, matters and folders are merged where they can be identified, and naming is put into one format, before anything is copied. It is not always possible to find every one, so some may carry across.
Trial load
A trial is loaded into Sync.com and checked against LinkedIn: record and file counts, the links between records, document dates, and a sample opened by your own people. Exceptions are listed for you to decide.
Cutover
There is no financial cutover on this route. After a short freeze on changes in LinkedIn, a final pass over a weekend picks up what changed since the trial. LinkedIn is kept read only as the fall-back record.
Fixed price, agreed after the analysis. How NewLaw moves legal data
Start
Start this migration
Tell us what is in LinkedIn and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.
Step 1 of 5
What happens after you send it
- A free first call
We go through your answers with you and ask about anything they leave open.
- An analysis of what LinkedIn holds
What is in it, how its records link, and where each piece would sit in Sync.com. Anything with no place there comes across as a note or stays behind, and you see which before the move.
- A fixed price in writing
Set after the analysis, so it reflects what is in your data. You have it before any work starts.
Beyond the data
Structure, permissions and handover
Sync.com is storage, not an application, so there is no product to configure. What is agreed and set up is the folder structure, who can open what, and how the result is handed to the firm.
A Sync set-up comes down to accounts and shares. A team plan gives an administrator control over users, two-factor authentication and password resets, which matters more than usual in a service the provider says it cannot see into. The shared folders are then created to match the firm’s teams and its restricted matters.
What is agreed and set up
- Administrator account and a user for each staff member
- Two-factor authentication enforced across the firm
- Team shared folders with view or edit permission per person
- Which matters live in Files and which in Vault
- Rules for client links: passwords, expiry dates, upload rights
- Desktop app installed, with a filing guide for new matters
Questions
LinkedIn to Sync.com: what firms ask
Can the firm export all its lawyers’ connections at once?
No. LinkedIn provides each member’s own data to that member only, and lists only first-degree connections. Every lawyer runs the request from their own account and passes on the connections file. The files are then merged, and people known to several lawyers appear once with each relationship recorded.
Will LinkedIn messages come across?
The larger archive includes a messages file with dates, subjects and content. It is a member’s private correspondence and is rarely appropriate to load into a firm system. If a particular conversation matters to a file, the lawyer saves it to that matter by hand, the way they would a personal email.
Do contacts from LinkedIn arrive in Sync.com without duplicates?
Sync.com has no place for contacts. The contact list from LinkedIn is exported as a spreadsheet and kept as a readable archive.
What happens to records Sync.com has no place for?
On this route that is contacts. They are exported from LinkedIn in formats that open without it, spreadsheets and PDFs, and handed to the firm as a read-only archive. You see the list before the move.
What has to be decided before LinkedIn data is loaded into Sync.com?
Less than on most routes: each kind of record here either carries across or is archived. The firm also decides which closed matters and how many versions of a document are in scope.
Other routes
Other routes from LinkedIn and into Sync.com
Other destinations from LinkedIn
Where to start
Before and after the move.
Choosing the system comes before a migration. Setting it up and putting AI to work come after.
Choose your systems
Technology stack selection
Decide which practice management system your firm runs, with the evidence and the cost beside it.
About four weeks for a firm of about 15 people. Fixed price, set after a free first call.
Move your data
Data migration
Your data is cleaned up before anything moves, then a trial load is checked against the old system.
Fixed price, agreed after the analysis.
Set up your new system
Implementation
Your new system set up around the way your firm works: configuration, document automation and training.
A small firm of 1 to 10 users typically takes 4 to 8 weeks. A mid-sized firm of 10 to 50 users takes 8 to 16 weeks.
Put AI to work
AI advisory and enablement
A small group of your people learn to use an approved AI tool on real work, under written rules.
Two to four weeks for a small first group. Fixed price, set after a free first call.
LinkedIn and Sync.com are the names and marks of their owners, used here only to identify the two systems.
Moving from LinkedIn to Sync.com?
Tell us what you are moving. You get a plan and a fixed price after the analysis.
We reply within one business day.