Data migration route
Keyhouse to SmartAdvocate migration
Keyhouse is a server-based practice management system, and SmartAdvocate is a cloud case management system for personal injury work. Matter records move into cases, and the firm decides where its accounting runs from the cutover date.
KeyhouseServer- Matters: Carried across
- Documents: Carried across
- Emails: Carried across
- Calendar: Carried across
- Tasks: Carried across
- Time and expenses: Carried across
- Billing: Carried with mapping
- Templates: Carried with mapping
- Contacts: Confirmed in the analysis
- Notes: Confirmed in the analysis
- Trust money: Confirmed in the analysis
- Firm accounts: Confirmed in the analysis
- Custom fields: Confirmed in the analysis
- Intake: Confirmed in the analysis
SmartAdvocateCloud- 6 carried
- 2 mapped
- 6 to confirm
What moves
What moves from Keyhouse to SmartAdvocate
Each row is a kind of record Keyhouse holds, whether SmartAdvocate has a place for it, and what is planned. On this route six kinds of record carry across, two kinds need mapping and six kinds are confirmed in the analysis.
| Record | What is planned | ||
|---|---|---|---|
| MattersMatters or cases, with their numbers, types, parties and status | HeldOrganised as cases. | Has a placeCases by case type, with master and member relationships. | Carried across |
| ContactsClients, other parties and referrers | To be confirmed | Has a place | Confirmed in the analysis |
| DocumentsFiles stored in or linked from the system | HeldEmails and documents are stored in the case file. | Has a placeDocuments page, by category and subcategory. | Carried across |
| EmailsEmails saved to matters or to the store | HeldEmails are assigned to cases. | Has a placeEmails are attached to cases. | Carried across |
| NotesFile notes, matter notes and contact notes | To be confirmed | Has a place | Confirmed in the analysis |
| CalendarAppointments, court dates and deadlines | Held in partDates are managed against cases. | Has a placeAppointments and critical deadlines. | Carried across |
| TasksTo-dos and workflow steps assigned to people | HeldTasks are diarised from the case. | Has a place | Carried across |
| Time and expensesTime and expense entries, billed and unbilled | HeldKeyhouse Time Recording. | Has a placeTracked time entries. | Carried across |
| BillingInvoices, payments and debtor balances | HeldBills are supported by recorded time. | Has a place in partInvoices for hourly matters. Past invoices are scoped in the analysis. | Carried with mapping |
| Trust moneyTrust or client account ledgers and balances | HeldKeyhouse Legal Accounts follows the solicitors’ accounts rules. | To be confirmed | Confirmed in the analysis |
| Firm accountsGeneral ledger, office account and payables | To be confirmed | To be confirmed | Confirmed in the analysis |
| Custom fieldsFields and record types the firm added itself | To be confirmed | Has a place in partConfirmed in the analysis for each field with no standard home. | Confirmed in the analysis |
| TemplatesPrecedents, document templates and automation | HeldDocument generation from the case, and a Brief Builder for court briefs. | Has a place in partTemplates are rebuilt with SmartAdvocate merge codes. | Carried with mapping |
| IntakeLeads, enquiries, intake forms and pipelines | To be confirmed | Has a placeIntake and lead records. | Confirmed in the analysis |
What the plans mean
- Carried across
- SmartAdvocate has a place for this kind of record. It is loaded there and checked against Keyhouse.
- Carried with mapping
- SmartAdvocate holds this differently, or in part. Each field or value is matched to its place before loading, and you see the mapping first.
- Confirmed in the analysis
- We could not confirm this from the two products’ own material, so it is checked against your data before the plan is fixed.
The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.
This kind of move
Matters become cases. The ledgers need a home.
Going from a practice management system to a case management system is a move towards the file and away from the ledger. Matters, parties, documents, notes and deadlines have a natural place in SmartAdvocate. Time, invoices, trust and the general ledger often do not, or only in part, and the table above shows which. Before the move is planned the firm settles where billing and trust accounting will run, because that decides what is loaded and what is archived.
Case systems are usually built around a practice area, with their own stages, roles and document sets. A general matter from Keyhouse has to be given a case type in SmartAdvocate, and that choice drives which fields and workflows it gets. The mapping is agreed type by type. Financial history with no place in SmartAdvocate is exported as reports and ledgers the firm can open without Keyhouse, and kept as the record of what was billed and held.
Keyhouse runs on the firm’s own equipment, so the data is collected there: a copy of the database and the folders its documents sit in, taken with the firm’s IT provider or over a remote session. SmartAdvocate is hosted by its maker, so loading depends on the import tools and access it provides. The old machine is kept, read only, as the fall-back record.
Where the data is now
Leaving Keyhouse
Keyhouse is sold as modules, so the first step is listing which ones the firm has and which it really uses. A firm with Case Management and Legal Accounts is moving cases, documents and client ledgers together. One that also uses dictation, the mobile app or an iManage link has more places where records sit. Hosting matters too: on premise and Keyhouse 365 are collected differently.
Cases, not matters
Keyhouse speaks of cases and case files. Each one gathers its emails, documents, dates and tasks. In a destination that uses matters the mapping is one to one, but the case reference is what documents and ledger entries hang from, so it is carried across unchanged as the matter number or in a reference field.
Briefs built in Keyhouse
The Brief Builder assembles court briefs from documents on the case. A finished brief is a document and moves like any other. The tool does not. Litigation teams that depend on it should see how the new system produces a paginated brief before go-live, using one of their own cases from the trial load.
Dictation in the case file
Digital dictation lets a solicitor dictate straight into a case file for a secretary to check. Those recordings are counted in the analysis. The typed result is the record, so completed recordings can stay in the archive, but any dictation still waiting to be typed at cutover is finished in Keyhouse first.
Documents may be in iManage
Keyhouse integrates with iManage and with ShareFile. Where a firm uses iManage, its documents may be in that system and Keyhouse holds the case and accounts data. The document move is then an iManage question, and the link between each workspace and its case has to survive whatever replaces Keyhouse.
Irish accounts rules
Legal Accounts is built to comply with the solicitors’ accounts rules that Irish firms work under. A destination has to handle client account ledgers under those same rules, in euro. That narrows the field more than any other requirement, so it is checked before the firm spends time comparing features elsewhere.
Where it is going
Arriving in SmartAdvocate
SmartAdvocate keeps injury detail in structured fields and screens, so mapping counts for more than usual: the more precisely the old data is placed, the more of those screens are filled on the first day. Parties, incidents, insurers, providers and bills are loaded to their own screens, and the vendor’s implementation team runs conversions into it.
Map to fields, not notes
The case summary, dashboards and settlement screen read from structured fields. Injury details, insurance limits and provider bills dumped into a note leave those screens empty. The mapping takes each old field to its SmartAdvocate counterpart, and only what truly has no counterpart is loaded as a note.
Case types and statuses
Cases are loaded against case types and statuses that drive WorkPlans and reports. These are agreed with the firm before the trial load, and old statuses are translated to the new list. A status with no match is not guessed at. It is listed, and someone who knows the files decides.
Document categories
Documents are searched by category, subcategory, sender, recipient and date as well as by folder. The old system’s folders are translated into categories on the way in. Files that arrive uncategorised can still be found by description, but they fall outside the category views staff are trained to use.
Working with the vendor’s conversion
SmartAdvocate’s implementation team converts client data into the system and trains staff through its own classes. The firm’s side of that is supplying a clean source, checking the converted cases against the old system, and deciding what to do with the exceptions. Independent help is used on those tasks.
Choosing Server or Cloud
The firm decides before loading whether it will run the Server edition on its own Windows server or use the hosted Cloud edition. Either way the data load is the same. What differs is who looks after backups, updates and remote access afterwards, and that is settled with the firm’s IT provider.
How NewLaw runs it
Four steps, in this order.
Financial records move on this route, so the balances are rehearsed before the real cutover. The maker of SmartAdvocate says that it, or its partners, load firms into the product. Where the firm uses that service, NewLaw’s part is the work around it: the analysis, the clean-up in Keyhouse and checking each trial against Keyhouse.
Analysis
We read what Keyhouse holds and how its records link, then agree with you, field by field, where each piece will sit in SmartAdvocate. Anything with no place there comes across as a note or stays behind, and you see which before the move.
Clean-up
Duplicate contacts and matters are merged where they can be identified, and inconsistent entries are put into one format, in Keyhouse, before extraction. It is not always possible to find every one, so some may carry across.
Trial load
The data is loaded into SmartAdvocate as a trial and checked against Keyhouse: record counts, financial totals, the links between records, document dates. Exceptions are listed for you to decide.
Cutover
Changes in Keyhouse are frozen for an agreed window, the data is collected a final time and SmartAdvocate goes live over a weekend. The financial cutover is rehearsed on a full trial load first, so that opening balances agree with the reports in Keyhouse as at the cutover date. Keyhouse is kept read only as the fall-back record.
Fixed price, agreed after the analysis. How NewLaw moves legal data
Start
Start this migration
Tell us what is in Keyhouse and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.
Step 1 of 5
What happens after you send it
- A free first call
We go through your answers with you and ask about anything they leave open.
- An analysis of what Keyhouse holds
What is in it, how its records link, and where each piece would sit in SmartAdvocate. Anything with no place there comes across as a note or stays behind, and you see which before the move.
- A fixed price in writing
Set after the analysis, so it reflects what is in your data. You have it before any work starts.
Beyond the data
Setting up SmartAdvocate
Loaded data is not yet a working system. The maker of SmartAdvocate runs or arranges the set-up of its product, so this is what has to be decided and put in place in SmartAdvocate, whoever does the work, before people rely on it from the first day.
Setting up SmartAdvocate is a matter of deciding how much of its detail the firm will use from the start. Case types, statuses and WorkPlans come first because they drive everything else. Templates follow. The vendor trains staff through its own classes, and the decisions below are best made before the first of those.
Set-up decisions in SmartAdvocate
- Choose the Server or Cloud edition with IT
- Define case types, statuses and staff roles
- Build WorkPlans and Automated Procedures for each case type
- Convert letters and forms into templates with merge codes
- Install the Outlook plugin and agree email filing habits
- Set up intake screens, lead sources and dashboards
Questions
Keyhouse to SmartAdvocate: what firms ask
We are on Keyhouse 365. How is our data collected?
Keyhouse 365 is the vendor’s cloud service, so the database and documents are on its platform and a copy is requested through the firm. For an on-premise installation the copy is taken from the firm’s own server. Either way we check the copy against Keyhouse’s reports before the trial load.
Can historical accounts data come with us?
Balances for each client and case are loaded and reconciled to the closing reports. Older postings can be loaded only if the destination accepts historical transactions, and many do not. Where they cannot go in, ledger cards are saved as PDFs to each open case and the full history stays in the archived system.
Do case numbers stay the same?
Yes, where the new system lets a number be supplied. The Keyhouse case reference becomes the matter number, and documents and ledgers are matched on it during the load. If the destination generates its own numbers, the old reference is stored on the matter in a reference field.
Do trust balances in Keyhouse have a place in SmartAdvocate?
That is confirmed in the analysis. We could not establish it from the two products’ own material, so it is checked against your data in Keyhouse before the plan is fixed. If SmartAdvocate turns out to have no place for trust ledgers, they are kept as a readable archive and the firm decides where trust accounting runs.
Does everything in Keyhouse have a place in SmartAdvocate?
Most of it does on paper. Contacts, notes, trust ledgers, the firm’s accounts, custom fields and intake records could not be confirmed from the two products’ own material, so those are checked in the analysis. Anything that turns out to have no place in SmartAdvocate is kept as a readable archive, and you see which before the move.
What has to be decided before Keyhouse data is loaded into SmartAdvocate?
Billing records and templates are carried with mapping, so each mapping is agreed with you first. Contacts, notes, trust ledgers, the firm’s accounts, custom fields and intake records are confirmed in the analysis. The firm also sets the cutover date and how much financial history comes across as live records.
Other routes
Other routes from Keyhouse and into SmartAdvocate
Other destinations from Keyhouse
Other systems that move into SmartAdvocate
Where to start
Before and after the move.
Choosing the system comes before a migration. Setting it up and putting AI to work come after.
Choose your systems
Technology stack selection
Decide which practice management system your firm runs, with the evidence and the cost beside it.
About four weeks for a firm of about 15 people. Fixed price, set after a free first call.
Move your data
Data migration
Your data is cleaned up before anything moves, then a trial load is checked against the old system.
Fixed price, agreed after the analysis.
Set up your new system
Implementation
Your new system set up around the way your firm works: configuration, document automation and training.
A small firm of 1 to 10 users typically takes 4 to 8 weeks. A mid-sized firm of 10 to 50 users takes 8 to 16 weeks.
Put AI to work
AI advisory and enablement
A small group of your people learn to use an approved AI tool on real work, under written rules.
Two to four weeks for a small first group. Fixed price, set after a free first call.
Keyhouse and SmartAdvocate are the names and marks of their owners, used here only to identify the two systems.
Moving from Keyhouse to SmartAdvocate?
Tell us what you are moving. You get a plan and a fixed price after the analysis.
We reply within one business day.