Data migration route
Claris FileMaker Pro to Soluno migration
Claris FileMaker Pro is a desktop database, and Soluno is a cloud accounting and billing system. Only names and any financial records have a place in a set of books, so little of this moves.
Claris FileMaker ProDesktop- Matters: Confirmed in the analysis
- Contacts: Confirmed in the analysis
- Documents: Confirmed in the analysis
- Emails: Confirmed in the analysis
- Notes: Confirmed in the analysis
- Calendar: Confirmed in the analysis
- Tasks: Confirmed in the analysis
- Time and expenses: Confirmed in the analysis
- Billing: Confirmed in the analysis
- Trust money: Confirmed in the analysis
- Firm accounts: Confirmed in the analysis
- Custom fields: Confirmed in the analysis
- Templates: Confirmed in the analysis
- Intake: Confirmed in the analysis
SolunoCloud- 14 to confirm
What moves
What moves from Claris FileMaker Pro to Soluno
Each row is a kind of record Claris FileMaker Pro holds, whether Soluno has a place for it, and what is planned. On this route fourteen kinds are confirmed in the analysis.
| Record | What is planned | ||
|---|---|---|---|
| MattersMatters or cases, with their numbers, types, parties and status | To be confirmedDepends entirely on what the firm built. | Has a placeAs files, with number, area of practice, responsible lawyer and billing settings. | Confirmed in the analysis |
| ContactsClients, other parties and referrers | To be confirmedMost firm-built systems start with a client table, but it is confirmed per system. | Has a placeEach contact is numbered; a file must have a primary contact. | Confirmed in the analysis |
| DocumentsFiles stored in or linked from the system | Held in partContainer fields can hold files, embedded, stored externally or by reference. | To be confirmedNo matter document store is described; NetDocuments can be linked. | Confirmed in the analysis |
| EmailsEmails saved to matters or to the store | To be confirmed | To be confirmed | Confirmed in the analysis |
| NotesFile notes, matter notes and contact notes | To be confirmed | To be confirmed | Confirmed in the analysis |
| CalendarAppointments, court dates and deadlines | To be confirmed | To be confirmed | Confirmed in the analysis |
| TasksTo-dos and workflow steps assigned to people | To be confirmed | To be confirmed | Confirmed in the analysis |
| Time and expensesTime and expense entries, billed and unbilled | To be confirmed | Has a place | Confirmed in the analysis |
| BillingInvoices, payments and debtor balances | To be confirmed | Has a place | Confirmed in the analysis |
| Trust moneyTrust or client account ledgers and balances | To be confirmed | Has a place | Confirmed in the analysis |
| Firm accountsGeneral ledger, office account and payables | To be confirmed | Has a placeGeneral ledger; history is loaded into open periods that are then closed in order. | Confirmed in the analysis |
| Custom fieldsFields and record types the firm added itself | HeldEvery table and field was defined by the firm or its developer. | To be confirmed | Confirmed in the analysis |
| TemplatesPrecedents, document templates and automation | To be confirmedLetters may be produced from layouts with merge fields; confirmed per system. | To be confirmed | Confirmed in the analysis |
| IntakeLeads, enquiries, intake forms and pipelines | To be confirmed | To be confirmed | Confirmed in the analysis |
What the plans mean
- Confirmed in the analysis
- We could not confirm this from the two products’ own material, so it is checked against your data before the plan is fixed.
The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.
This kind of move
Little of this belongs in the accounts.
Soluno is an accounting package. It takes customers, suppliers, invoices and ledger entries, and has no place for documents, case notes, calendars or leads. From Claris FileMaker Pro, that usually leaves the contact list, loaded as customers, and any financial records it happens to keep. The table above shows which. This is a small job, and it is better to say so plainly before a firm plans around it.
Loading customers into an accounting system has consequences a contact list elsewhere does not. Every customer can be invoiced, so duplicates and half-complete records turn into billing mistakes. The list is cleaned and matched against the customers already in Soluno before anything is added. The rest of what Claris FileMaker Pro holds is exported in open formats and kept as an archive, or moved on a different route to a system built for it.
Claris FileMaker Pro runs on the firm’s own equipment, so the data is collected there: a copy of the database and the folders its documents sit in, taken with the firm’s IT provider or over a remote session. Soluno is hosted by its maker, so loading depends on the import tools and access it provides. The old machine is kept, read only, as the fall-back record.
Where the data is now
Leaving Claris FileMaker Pro
With a firm-built system there is no vendor manual describing the data, so the first job is to write one. The design is read out of the FileMaker files themselves, then walked through with the person who knows the system best. Only after that can anyone say what it holds, which parts are still used, and where each field will go.
Read the design from the file
FileMaker can produce a Database Design Report, or save a copy of the file as XML, setting out every table, field, relationship, layout and script. Either needs an account with full access privileges. That report is the starting document for the analysis, and it can turn up tables nobody remembers.
Layouts are not tables
Staff know the system by its screens. A single matter layout may draw on five related tables through portals and lookups. Exports run table by table, so each screen is traced back to the tables behind it and the key fields that join them are carried through, or the links are lost.
Documents in container fields
A container field can hold a document embedded in the database, stored in an external folder that FileMaker manages, or only as a reference to a file elsewhere. Each kind is extracted differently. References are tested, because a path recorded in 2012 may point to a server that no longer exists.
Calculated and summary fields
A matter balance or total hours shown on screen may be a calculation, not stored data. An export gives the result as it stood that day. The firm chooses between bringing the figure as a fixed number and bringing the underlying entries so the new system can work it out again.
Free typing and private conventions
Home-built systems rarely validate what is typed. The same court appears under six spellings, dates sit in text fields, and one field has been reused for something else since 2015. Clean-up therefore takes longer here than for a packaged product, and the firm sees the proposed standard values first.
Where it is going
Arriving in Soluno
Soluno, which Actionstep now sells as Actionstep Legal Accounting, is an accounting system first, and it expects accounting discipline from the data it is given. Contacts and files need numbers. Entries need dates that fall in open financial periods. Billing, rate and file groups should exist before files are created so that defaults apply. Where documents, calendars and case detail will live is settled alongside.
Numbers for contacts and files
Every contact has a number and every file has a file number, which Soluno can generate on its own or by contact. A firm can keep its old numbers by typing over the suggested value. The format is agreed first, since the help centre puts later number changes behind an administrator setting once NetDocuments is in use.
Groups before files
File, billing and rate groups set the defaults a new file picks up, and a file can override them. Loading thousands of files without the groups in place means fixing each one by hand later. The groups are designed from the source system’s rate tables and billing terms during the analysis.
Periods must be open
Soluno closes financial periods, and a file cannot be closed while it has entries dated after the last closed period. Historic transactions are loaded with the relevant periods open, checked, and then the periods are closed in order. That sequence is rehearsed on the full trial load with the firm’s accountant.
Closed matters need zero balances
A file closes only when it has no work in progress, no receivable and no retainer or trust balance. Old matters that the source system marked closed while still carrying a few dollars will not close here. Those small balances are written off or cleared in the source before extraction, with partner approval.
Documents live beside it
Its help centre covers accounting, banking, billing, contacts and files, and describes links to NetDocuments and to Actionstep practice management. It describes no matter document store. A firm arriving from an all-in-one product should expect to need a second destination for its documents, emails and calendar, and the two loads are planned together so matter numbers match in both.
How NewLaw runs it
Four steps, in this order.
No financial cutover is planned on this route, so a load can be run again until it is right. If the analysis finds financial records with a place in Soluno, they get a rehearsed cutover of their own.
Analysis
We read what Claris FileMaker Pro holds and how it is organised, then agree with you where each kind of record will sit in Soluno. Anything with no place there stays behind or is archived, and you see which before the move.
Clean-up
Duplicate clients, matters and folders are merged where they can be identified, and naming is put into one format, before anything is copied. It is not always possible to find every one, so some may carry across.
Trial load
A trial is loaded into Soluno and checked against Claris FileMaker Pro: record and file counts, the links between records, document dates, and a sample opened by your own people. Exceptions are listed for you to decide.
Cutover
After a short freeze on changes in Claris FileMaker Pro, a final pass over a weekend picks up what changed since the trial. If the analysis found financial records to move, their cutover is rehearsed on a full trial load first. Claris FileMaker Pro is kept read only as the fall-back record.
Fixed price, agreed after the analysis. How NewLaw moves legal data
Start
Start this migration
Tell us what is in Claris FileMaker Pro and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.
Step 1 of 5
What happens after you send it
- A free first call
We go through your answers with you and ask about anything they leave open.
- An analysis of what Claris FileMaker Pro holds
What is in it, how its records link, and where each piece would sit in Soluno. Anything with no place there comes across as a note or stays behind, and you see which before the move.
- A fixed price in writing
Set after the analysis, so it reflects what is in your data. You have it before any work starts.
Beyond the data
Setting up Soluno
Loaded data is not yet a working system. This is what NewLaw sets up in Soluno, beyond the migration, so that people can work in it from the first day.
Most of the set-up in Soluno is financial structure. The chart of accounts, bank accounts and financial periods come first, then the groups that control billing and rates, then users and what each group of users may do. Lawyers need task code shortcuts and rates before they can enter time. If NetDocuments or Actionstep practice management is to be linked, that connection is made once numbering is final.
Set-up decisions in Soluno
- Chart of accounts, bank accounts and opening financial periods
- File, billing and rate groups with their default arrangements
- Contact and file numbering format, set firm-wide or by contact
- User groups and what each group may see or do
- Task and activity codes and each lawyer’s shortcuts
- Link to NetDocuments or to Actionstep practice management
Questions
Claris FileMaker Pro to Soluno: what firms ask
The person who built our system has gone. Can it still be moved?
Usually, provided someone holds a full access account for the files. With that, the design can be read without the developer. Without it, data can still be exported from whatever the firm’s own logins can see, but the scripts and hidden tables cannot be inspected, and the analysis takes longer and says so.
Our system does things no legal product does. What happens to those?
Each one is listed in the analysis and put in one of three groups: the new system does it differently, the new system can be configured to do it, or it will stop. The third group is the one to discuss with the partners early. A custom register can also be kept as an exported spreadsheet.
Can we keep FileMaker for reference afterwards?
Yes. The files can be left on the server, or a copy opened in FileMaker Pro on one PC, with accounts changed to read only so nothing new is entered. That is the fall-back record. It depends on keeping a working FileMaker licence and a machine that runs it, which the firm should note for later years.
Do documents from Claris FileMaker Pro keep their folders and dates in Soluno?
That is confirmed in the analysis. We could not establish it from the two products’ own material, so it is checked against your data in Claris FileMaker Pro before the plan is fixed. Documents that have no place in Soluno are exported into folders by client and matter.
Does everything in Claris FileMaker Pro have a place in Soluno?
Most of it does on paper. Matters, contacts, documents, emails, notes, calendar entries, tasks, time entries, billing records, trust ledgers, the firm’s accounts, custom fields, templates and intake records could not be confirmed from the two products’ own material, so those are checked in the analysis. Anything that turns out to have no place in Soluno is kept as a readable archive, and you see which before the move.
What has to be decided before Claris FileMaker Pro data is loaded into Soluno?
Matters, contacts, documents, emails, notes, calendar entries, tasks, time entries, billing records, trust ledgers, the firm’s accounts, custom fields, templates and intake records are confirmed in the analysis. The firm also decides which closed matters and how many versions of a document are in scope.
Other routes
Other routes from Claris FileMaker Pro and into Soluno
Other destinations from Claris FileMaker Pro
Where to start
Before and after the move.
Choosing the system comes before a migration. Setting it up and putting AI to work come after.
Choose your systems
Technology stack selection
Decide which practice management system your firm runs, with the evidence and the cost beside it.
About four weeks for a firm of about 15 people. Fixed price, set after a free first call.
Move your data
Data migration
Your data is cleaned up before anything moves, then a trial load is checked against the old system.
Fixed price, agreed after the analysis.
Set up your new system
Implementation
Your new system set up around the way your firm works: configuration, document automation and training.
A small firm of 1 to 10 users typically takes 4 to 8 weeks. A mid-sized firm of 10 to 50 users takes 8 to 16 weeks.
Put AI to work
AI advisory and enablement
A small group of your people learn to use an approved AI tool on real work, under written rules.
Two to four weeks for a small first group. Fixed price, set after a free first call.
Claris FileMaker Pro and Soluno are the names and marks of their owners, used here only to identify the two systems.
Moving from Claris FileMaker Pro to Soluno?
Tell us what you are moving. You get a plan and a fixed price after the analysis.
We reply within one business day.