Data migration route
Document Locator to SmartAdvocate migration
Document Locator is a server-based document management system, and SmartAdvocate is a cloud case management system for personal injury work. The move is matching each file in Document Locator to its case in SmartAdvocate.
Document LocatorServer- Documents: Carried across
- Emails: Carried across
- Tasks: Carried across
- Custom fields: Carried with mapping
- Notes: Confirmed in the analysis
- Templates: Confirmed in the analysis
SmartAdvocateCloud- 3 carried
- 1 mapped
- 2 to confirm
What moves
What moves from Document Locator to SmartAdvocate
Each row is a kind of record Document Locator holds, whether SmartAdvocate has a place for it, and what is planned. On this route three kinds of record carry across, one kind needs mapping and two kinds are confirmed in the analysis.
| Record | What is planned | ||
|---|---|---|---|
| DocumentsFiles stored in or linked from the system | HeldIn repository folders, with automatic versions, profiles and an audit log. | Has a placeDocuments page, by category and subcategory. | Carried across |
| EmailsEmails saved to matters or to the store | Held in partEmails and attachments can be captured and managed with the documents. | Has a placeEmails are attached to cases. | Carried across |
| NotesFile notes, matter notes and contact notes | To be confirmed | Has a place | Confirmed in the analysis |
| TasksTo-dos and workflow steps assigned to people | Held in partWorkflow and approval steps routed to people. | Has a place | Carried across |
| Custom fieldsFields and record types the firm added itself | HeldMetadata is applied through profiles the administrator defines. | Has a place in partConfirmed in the analysis for each field with no standard home. | Carried with mapping |
| TemplatesPrecedents, document templates and automation | To be confirmed | Has a place in partTemplates are rebuilt with SmartAdvocate merge codes. | Confirmed in the analysis |
What the plans mean
- Carried across
- SmartAdvocate has a place for this kind of record. It is loaded there and checked against Document Locator.
- Carried with mapping
- SmartAdvocate holds this differently, or in part. Each field or value is matched to its place before loading, and you see the mapping first.
- Confirmed in the analysis
- We could not confirm this from the two products’ own material, so it is checked against your data before the plan is fixed.
The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.
This kind of move
Every document goes to the case it belongs to.
A case management system expects each document to sit on a case, usually in a category such as correspondence, medical records or court documents. Document Locator organises files its own way, by profile or by folder. So the move needs two rules: which case a file belongs to, and which category it goes in. The first comes from client and matter references or folder names. The second comes from a document type or a subfolder, and where neither exists the files arrive uncategorised and are marked as such.
Cases must exist in SmartAdvocate before documents can be attached to them. If the system is already live, files are matched to its case list and the unmatched ones are reported. If it is new, the case list is created first. Dates, authors and file names are kept. Email comes across as message files. Where several versions of a document exist, the firm chooses between loading the latest and loading them all.
Document Locator runs on the firm’s own equipment, so the data is collected there: a copy of the database and the folders its documents sit in, taken with the firm’s IT provider or over a remote session. SmartAdvocate is hosted by its maker, so loading depends on the import tools and access it provides. The old machine is kept, read only, as the fall-back record.
Where the data is now
Leaving Document Locator
Because Document Locator presents itself as folders in Windows, people assume the documents can be dragged out like files on a drive. They are in a SQL Server repository. A copy made that way should not be expected to bring versions, profile values or permissions with it. A planned extraction reads the repository for those, and for check-out state as well.
A repository, not a share
The folder tree users see is drawn from a Microsoft SQL Server repository. On-premises, that database is on the firm’s server and can be backed up and read. In the hosted service it is on Azure and access is arranged with ColumbiaSoft. Which of the two applies shapes how the work begins.
Folders stand in for matters
There is no client or matter record, so firms build the equivalent with a folder convention, sometimes created automatically by a project-folder rule. The convention is read off the tree and tested: how many top-level folders match a client in the practice management system, and how many are something else.
Version numbers and notes
Every check-in adds a version with an incrementing number, users can add a version note, and prior versions can be promoted. For controlled documents such as policies and precedents, that history is the point of the system. The firm decides folder by folder whether history comes across or only the current version.
Workflow and required reading
Approvals in progress, review reminders and acknowledgements that staff have read a policy are records of process. A legal document system will usually have nowhere to put them. Reports are run from Document Locator before cutover and saved as documents, so the evidence is kept even though the workflow is not.
Where it is going
Arriving in SmartAdvocate
SmartAdvocate keeps injury detail in structured fields and screens, so mapping counts for more than usual: the more precisely the old data is placed, the more of those screens are filled on the first day. Parties, incidents, insurers, providers and bills are loaded to their own screens, and the vendor’s implementation team runs conversions into it.
Map to fields, not notes
The case summary, dashboards and settlement screen read from structured fields. Injury details, insurance limits and provider bills dumped into a note leave those screens empty. The mapping takes each old field to its SmartAdvocate counterpart, and only what truly has no counterpart is loaded as a note.
Case types and statuses
Cases are loaded against case types and statuses that drive WorkPlans and reports. These are agreed with the firm before the trial load, and old statuses are translated to the new list. A status with no match is not guessed at. It is listed, and someone who knows the files decides.
Document categories
Documents are searched by category, subcategory, sender, recipient and date as well as by folder. The old system’s folders are translated into categories on the way in. Files that arrive uncategorised can still be found by description, but they fall outside the category views staff are trained to use.
Working with the vendor’s conversion
SmartAdvocate’s implementation team converts client data into the system and trains staff through its own classes. The firm’s side of that is supplying a clean source, checking the converted cases against the old system, and deciding what to do with the exceptions. Independent help is used on those tasks.
Choosing Server or Cloud
The firm decides before loading whether it will run the Server edition on its own Windows server or use the hosted Cloud edition. Either way the data load is the same. What differs is who looks after backups, updates and remote access afterwards, and that is settled with the firm’s IT provider.
How NewLaw runs it
Four steps, in this order.
Nothing financial lands in SmartAdvocate on this route, which makes it repeatable: a load can be run again until it is right. The maker of SmartAdvocate says that it, or its partners, load firms into the product. Where the firm uses that service, NewLaw’s part is the work around it: the analysis, the clean-up in Document Locator and checking each trial against Document Locator.
Analysis
We read what Document Locator holds and how it is organised, then agree with you where each kind of record will sit in SmartAdvocate. Anything with no place there stays behind or is archived, and you see which before the move.
Clean-up
Duplicate clients, matters and folders are merged where they can be identified, and naming is put into one format, before anything is copied. It is not always possible to find every one, so some may carry across.
Trial load
A trial is loaded into SmartAdvocate and checked against Document Locator: record and file counts, the links between records, document dates, and a sample opened by your own people. Exceptions are listed for you to decide.
Cutover
There is no financial cutover on this route. After a short freeze on changes in Document Locator, a final pass over a weekend picks up what changed since the trial. Document Locator is kept read only as the fall-back record.
Fixed price, agreed after the analysis. How NewLaw moves legal data
Start
Start this migration
Tell us what is in Document Locator and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.
Step 1 of 5
What happens after you send it
- A free first call
We go through your answers with you and ask about anything they leave open.
- An analysis of what Document Locator holds
What is in it, how its records link, and where each piece would sit in SmartAdvocate. Anything with no place there comes across as a note or stays behind, and you see which before the move.
- A fixed price in writing
Set after the analysis, so it reflects what is in your data. You have it before any work starts.
Beyond the data
Setting up SmartAdvocate
Loaded data is not yet a working system. The maker of SmartAdvocate runs or arranges the set-up of its product, so this is what has to be decided and put in place in SmartAdvocate, whoever does the work, before people rely on it from the first day.
Setting up SmartAdvocate is a matter of deciding how much of its detail the firm will use from the start. Case types, statuses and WorkPlans come first because they drive everything else. Templates follow. The vendor trains staff through its own classes, and the decisions below are best made before the first of those.
Set-up decisions in SmartAdvocate
- Choose the Server or Cloud edition with IT
- Define case types, statuses and staff roles
- Build WorkPlans and Automated Procedures for each case type
- Convert letters and forms into templates with merge codes
- Install the Outlook plugin and agree email filing habits
- Set up intake screens, lead sources and dashboards
Questions
Document Locator to SmartAdvocate: what firms ask
Can we simply copy the folders out through Windows?
It will produce files, and for a small set that may be all that is needed. It should not be relied on for a whole repository, because versions, profile metadata, permissions and audit history are in the database. The analysis establishes what the repository records about a document beyond the file itself.
How do documents get matched to matters when there is no matter record?
By the folder path or a profile field, whichever the firm used consistently. A matter list from the practice management system is matched against folder names, and the matches, near-matches and orphans are reported. Near-matches are confirmed by someone at the firm who knows the files.
Do documents from Document Locator keep their folders and dates in SmartAdvocate?
SmartAdvocate stores documents. Documents page, by category and subcategory. Each file is placed under the client and matter it came from, and created and modified dates are carried, so a document still shows when it was written. The trial load is checked by count and by opening a sample.
Does everything in Document Locator have a place in SmartAdvocate?
Most of it does on paper. Notes and templates could not be confirmed from the two products’ own material, so those are checked in the analysis. Anything that turns out to have no place in SmartAdvocate is kept as a readable archive, and you see which before the move.
What has to be decided before Document Locator data is loaded into SmartAdvocate?
Custom fields are carried with mapping, so each mapping is agreed with you first. Notes and templates are confirmed in the analysis. The firm also decides which closed matters and how many versions of a document are in scope.
Other routes
Other routes from Document Locator and into SmartAdvocate
Where to start
Before and after the move.
Choosing the system comes before a migration. Setting it up and putting AI to work come after.
Choose your systems
Technology stack selection
Decide which practice management system your firm runs, with the evidence and the cost beside it.
About four weeks for a firm of about 15 people. Fixed price, set after a free first call.
Move your data
Data migration
Your data is cleaned up before anything moves, then a trial load is checked against the old system.
Fixed price, agreed after the analysis.
Set up your new system
Implementation
Your new system set up around the way your firm works: configuration, document automation and training.
A small firm of 1 to 10 users typically takes 4 to 8 weeks. A mid-sized firm of 10 to 50 users takes 8 to 16 weeks.
Put AI to work
AI advisory and enablement
A small group of your people learn to use an approved AI tool on real work, under written rules.
Two to four weeks for a small first group. Fixed price, set after a free first call.
Document Locator and SmartAdvocate are the names and marks of their owners, used here only to identify the two systems.
Moving from Document Locator to SmartAdvocate?
Tell us what you are moving. You get a plan and a fixed price after the analysis.
We reply within one business day.