Data migration route
Amazon S3 to SharePoint migration
Amazon S3 and SharePoint are both cloud file storage. The folders move as they are, and the work is in permissions, paths and links.
Amazon S3Cloud- Documents: Carried across
- Emails: Carried with mapping
- Custom fields: Carried with mapping
SharePointCloud- 1 carried
- 2 mapped
What moves
What moves from Amazon S3 to SharePoint
Each row is a kind of record Amazon S3 holds, whether SharePoint has a place for it, and what is planned. On this route one kind of record carries across and two kinds need mapping.
| Record | What is planned | ||
|---|---|---|---|
| DocumentsFiles stored in or linked from the system | HeldObjects in buckets; a folder is only the part of the key before a slash. | Has a placeFiles in libraries, with columns and versions. | Carried across |
| EmailsEmails saved to matters or to the store | Held in partOnly where messages were saved to the bucket as files such as .msg or .eml. | Has a place in partAs .msg or .eml files, with columns for sender and date if set up. | Carried with mapping |
| Custom fieldsFields and record types the firm added itself | Held in partObjects can carry user-defined metadata and tags as name and value pairs. | Has a placeColumns and content types on libraries and lists. | Carried with mapping |
What the plans mean
- Carried across
- SharePoint has a place for this kind of record. It is loaded there and checked against Amazon S3.
- Carried with mapping
- SharePoint holds this differently, or in part. Each field or value is matched to its place before loading, and you see the mapping first.
The table states what the two products hold and what NewLaw plans for. It is not a promise that every record moves: that is settled against your own data in the analysis.
This kind of move
Same folders, new home.
Copying folders from Amazon S3 to SharePoint sounds like a drag and drop, and for a few gigabytes it is. For a firm’s whole document store the trouble is in the detail. The two stores have different limits on path length and different rules about characters in file names. Files open on someone’s desk during the copy are skipped. Modified dates are reset unless the copy is made with a tool that preserves them. Each of these is checked on a trial copy first.
Permissions and links do not travel. Who can see which folder is set up again in SharePoint, and it is a good moment to replace access granted to individuals over the years with groups. Shared links sent to clients stop working when the old store is switched off, so the live ones are listed and reissued. Documents that point at other documents by path, common in spreadsheets, are found and reported. The final pass copies only what changed since the trial.
Both are hosted by their makers, so nothing is collected from the firm’s office. What can be taken out of Amazon S3 depends on its export tools and on what its maker provides on request, and that is confirmed during the analysis, before a date is set. The subscription to Amazon S3 is kept running until the checks on SharePoint are finished.
Where the data is now
Leaving Amazon S3
Moving a firm’s files out of S3 starts with finding out who put them there and how they are named. A bucket filled by a person usually mirrors a client and matter folder tree. One filled by an application may hold nothing but numbered objects, with the real file names kept in that application’s database. Those are different jobs, and the analysis says which one this is.
Folders are part of the name
S3 has no folders. A key such as Clients/Nguyen/2019-0412/Letter.pdf is one long name, and the console draws folders from the slashes. Keys can run to 1,024 bytes, far longer than Windows or SharePoint accept, and may contain characters they reject. Those keys are listed in the analysis and shortened by an agreed rule.
Modified dates are upload dates
The date S3 records against an object is the date it was written to the bucket. A letter drafted in 2014 and uploaded in 2021 shows as 2021. Unless the original date was kept in object metadata or in an index, it cannot be recovered from S3, and document dates in the new system will reflect that.
Archive classes need a restore
Objects in the S3 Glacier Flexible Retrieval and Deep Archive storage classes cannot be read straight away. Each has to be restored to a temporary copy first, which takes time and is charged by AWS. Closed-matter archives are often stored this way, so the restore is requested before the trial load, not during it.
Versions exist only if enabled
Versioning is off unless someone switched it on for the bucket. Where it is on, every overwrite keeps the earlier object in full, and a deleted file sits behind a delete marker and is not removed. The firm decides whether earlier versions and deleted objects move, because a plain copy of the bucket brings only the current ones.
Application buckets need the database
Where a practice or document system used the bucket as its store, the keys are often identifiers and not file names. The matter, the document title and the author live in that system’s database. Copying the bucket alone produces thousands of unnamed files, so the objects are matched to their records before anything is loaded.
Where it is going
Arriving in SharePoint
SharePoint will take a firm’s documents in almost any arrangement, which is the difficulty. The structure has to be chosen before the load: what a client is, what a matter is, and where security is applied. Changing it afterwards means moving every file again. Most of the effort goes into that design and into the columns that describe each document.
Site, library or folder per matter
A matter can be a site, a library within a client site, or a folder in one large library. Each choice has consequences for permissions, for search and for how a new matter is opened. The firm makes that decision, and the people who open matters every day should be part of it.
Columns are built before content
If documents are to carry matter number, client, document type or author as columns, those columns and any content types exist before loading, so each file can be tagged as it arrives. Tagging hundreds of thousands of documents afterwards is a second project that seldom gets finished.
The 400 character path
SharePoint limits the full decoded path, site and library and folders and file name, to 400 characters. A deep tree copied from a server drive under a long site name can cross it. Path lengths are calculated against the planned structure, not the old one, before any file moves.
Large libraries and the view threshold
A library can hold millions of files, but a view that tries to show more than 5,000 items at once runs into the list view threshold. One flat library with a folder per matter needs indexed columns and filtered views from the start, or views begin to fail as the library fills.
Security by library, not by file
Microsoft supports up to 50,000 unique permissions in a library and recommends staying under 5,000. Restricting matters one folder at a time reaches that sooner than firms expect. Restricted work is better grouped into its own site or library, so the permission is set once.
How NewLaw runs it
Four steps, in this order.
Nothing financial lands in SharePoint on this route, which makes it repeatable: a load can be run again until it is right.
Analysis
We read what Amazon S3 holds and how it is organised, then agree with you where each kind of record will sit in SharePoint. Anything with no place there stays behind or is archived, and you see which before the move.
Clean-up
Duplicate clients, matters and folders are merged where they can be identified, and naming is put into one format, before anything is copied. It is not always possible to find every one, so some may carry across.
Trial load
A trial is loaded into SharePoint and checked against Amazon S3: record and file counts, the links between records, document dates, and a sample opened by your own people. Exceptions are listed for you to decide.
Cutover
There is no financial cutover on this route. After a short freeze on changes in Amazon S3, a final pass over a weekend picks up what changed since the trial. Amazon S3 is kept read only as the fall-back record.
Fixed price, agreed after the analysis. How NewLaw moves legal data
Start
Start this migration
Tell us what is in Amazon S3 and roughly how much of it. The first step is the analysis, and the price is fixed once it is done.
Step 1 of 5
What happens after you send it
- A free first call
We go through your answers with you and ask about anything they leave open.
- An analysis of what Amazon S3 holds
What is in it, how its records link, and where each piece would sit in SharePoint. Anything with no place there comes across as a note or stays behind, and you see which before the move.
- A fixed price in writing
Set after the analysis, so it reflects what is in your data. You have it before any work starts.
Beyond the data
Structure, permissions and handover
SharePoint is storage, not an application, so there is no product to configure. What is agreed and set up is the folder structure, who can open what, and how the result is handed to the firm.
Making SharePoint work as a firm’s document store is a design and build job in its own right. The sites, libraries, columns and permission groups are created, a way of opening a new matter is put in place so the structure repeats itself, and the Outlook and Teams habits around it are agreed. Search is tested with real questions from fee earners.
What is agreed and set up
- Site and library structure for clients and matters
- Columns and content types for matter number and document type
- Permission groups, with restricted matters in their own libraries
- A repeatable way to create each new matter’s workspace
- Version history limits and retention labels for closed matters
- Views, indexed columns and search tested on loaded data
Questions
Amazon S3 to SharePoint: what firms ask
Our IT provider set the bucket up. What do you need from them?
Access to read the bucket, arranged in whatever way the firm and its provider decide, and the region it sits in. They are also asked whether versioning is on, whether any objects are in an archive storage class, and whether a person or an application wrote the files. Moving the files out means reading them, so write access is not part of the request.
Will our client and matter folders look the same in the new system?
In outline, if the keys follow a client and matter pattern. Each part of the key between slashes becomes a folder, or is read as the client, the matter number and the document name where the destination files by matter. Keys that fit no pattern are listed for the firm to place by hand or leave in an unsorted folder.
Can the bucket stay as our archive after the move?
It can. A firm may move its active matters into the new system and leave closed files where they are. What matters then is that someone at the firm, not only the IT provider, holds the AWS account details and knows how to find one closed file by client name. That is worth writing down before the project ends.
Do documents from Amazon S3 keep their folders and dates in SharePoint?
SharePoint stores documents. Files in libraries, with columns and versions. Each file is placed under the client and matter it came from, and created and modified dates are carried, so a document still shows when it was written. The trial load is checked by count and by opening a sample.
Does everything in Amazon S3 have a place in SharePoint?
On paper, yes: each kind of record Amazon S3 holds has a place in SharePoint. Whether every field fits is a separate question, and the analysis answers it field by field. Anything with no place comes across as a note or stays behind, and you see which before the move.
What has to be decided before Amazon S3 data is loaded into SharePoint?
Emails and custom fields are carried with mapping, so each mapping is agreed with you first. The firm also decides which closed matters and how many versions of a document are in scope.
Other routes
Other routes from Amazon S3 and into SharePoint
Where to start
Before and after the move.
Choosing the system comes before a migration. Setting it up and putting AI to work come after.
Choose your systems
Technology stack selection
Decide which practice management system your firm runs, with the evidence and the cost beside it.
About four weeks for a firm of about 15 people. Fixed price, set after a free first call.
Move your data
Data migration
Your data is cleaned up before anything moves, then a trial load is checked against the old system.
Fixed price, agreed after the analysis.
Set up your new system
Implementation
Your new system set up around the way your firm works: configuration, document automation and training.
A small firm of 1 to 10 users typically takes 4 to 8 weeks. A mid-sized firm of 10 to 50 users takes 8 to 16 weeks.
Put AI to work
AI advisory and enablement
A small group of your people learn to use an approved AI tool on real work, under written rules.
Two to four weeks for a small first group. Fixed price, set after a free first call.
Amazon S3 and SharePoint are the names and marks of their owners, used here only to identify the two systems.
Moving from Amazon S3 to SharePoint?
Tell us what you are moving. You get a plan and a fixed price after the analysis.
We reply within one business day.